platform/scripts/setup-old/setup_mac_light.sh

#!/bin/bash
# Officer — macOS laptop setup.
#
# The barebones counterpart to scripts/setup/setup.sh (which targets an Ubuntu/Debian server and is left
# alone). This installs only what a laptop workflow needs: the file browser, Claude/opencode chat,
# and a terminal. No Go/Rust/cliamp/PulseAudio, no neovim, no shell dotfile stack, no VNC desktop,
# no sudoers grant, no power-management changes.
#
# EVERY STEP IS OPTIONAL. Each one prompts before doing anything, and can be preset non-interactively:
#
#   SETUP_POSTGRES=0 SETUP_OPENCODE=0 bash scripts/setup/setup_mac_light.sh
#
#   SETUP_PACKAGES   brew node@22 / bun / ffmpeg          SETUP_CLAUDE     claude code CLI
#   SETUP_POSTGRES   brew postgresql@18 + createdb        SETUP_OPENCODE   opencode CLI
#   SETUP_LINK_NODE  brew link --force node@22            SETUP_DEPS       bun install
#   SETUP_PM2        pm2 via npm                          SETUP_ENV        write .env
#   SETUP_INIT       gen:index + db:push                  SETUP_SERVICES   pm2 startOrRestart
#
# Accepted values: 1/y/yes/true to run, anything else to skip. Unset = ask (or take the default when
# stdin is not a terminal).
#
# This script never calls sudo itself — everything lands under the Homebrew prefix or $HOME. Note
# that Homebrew's own installer does ask for an administrator password on a fresh Mac.
#
# Usage: bash scripts/setup/setup_mac_light.sh

set -euo pipefail

GREEN='\033[0;32m'
YELLOW='\033[1;33m'
RED='\033[0;31m'
BOLD='\033[1m'
NC='\033[0m'

ok()   { echo -e "  ${GREEN}✓${NC} $1"; }
warn() { echo -e "  ${YELLOW}!${NC} $1"; }
fail() { echo -e "  ${RED}✗${NC} $1"; }
skip() { echo -e "  - $1"; }
step() { echo ""; echo -e "${BOLD}── $1 ──${NC}"; }

has() { command -v "$1" &>/dev/null; }

# `set -e` is on, so anything allowed to fail must be guarded explicitly — either inside an `if`, or
# with a trailing `|| true`. Note the classic trap this file avoids everywhere: a bare top-level
# `cmd_a && cmd_b` list returns non-zero when cmd_a fails, which aborts the script. Those are all
# written as `if cmd_a; then cmd_b; fi` instead.
FAILURES=()
note_failure() { FAILURES+=("$1"); fail "$1"; }

SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
# ../.. — this lives in scripts/setup/. See the note in setup.sh: PROJECT_DIR is where .env is written
# and where bun install, gen:index, db:push and pm2 are pointed, and none of them fails loudly on the
# wrong directory.
PROJECT_DIR="$(cd "$SCRIPT_DIR/../.." && pwd)"

PG_FORMULA="postgresql@18"
PG_DATABASE="officer_dev"
NODE_FORMULA="node@22"
ENV_FILE="$PROJECT_DIR/.env"
ECOSYSTEM="$PROJECT_DIR/ecosystem.mac.light.config.cjs"

# Ask, unless the matching SETUP_* variable already decided. $1 = variable name, $2 = prompt,
# $3 = default (y|n) used for a bare Enter and for non-interactive runs.
confirm() {
  local var="$1" prompt="$2" default="$3" preset reply hint
  preset="${!var:-}"
  if [ -n "$preset" ]; then
    case "$preset" in
      1|y|Y|yes|YES|true) return 0 ;;
      *) return 1 ;;
    esac
  fi
  if [ ! -t 0 ]; then
    if [ "$default" = "y" ]; then return 0; else return 1; fi
  fi
  hint="[y/N]"
  if [ "$default" = "y" ]; then hint="[Y/n]"; fi
  echo -en "  ${BOLD}${prompt}${NC} ${hint}: "
  reply=""
  read -r reply || true
  reply="${reply:-$default}"
  case "$reply" in
    y|Y|yes|YES) return 0 ;;
    *) return 1 ;;
  esac
}

# Prompt for a value with a default. Never fails the script.
ask() {
  local __var="$1" prompt="$2" default="$3" reply=""
  if [ ! -t 0 ]; then
    printf -v "$__var" '%s' "$default"
    return 0
  fi
  echo -en "  ${BOLD}${prompt}${NC} [${default}]: "
  read -r reply || true
  printf -v "$__var" '%s' "${reply:-$default}"
}

echo ""
echo "═══════════════════════════════════════════"
echo "  Officer — macOS setup"
echo "═══════════════════════════════════════════"

# ─── 0. preflight ─────────────────────────────────────────────────────────────
step "Preflight"

if [ "$(uname -s)" != "Darwin" ]; then
  fail "This script is macOS-only. On Linux use scripts/setup/setup.sh."
  exit 1
fi

# Running under sudo would install bun/claude/opencode into /var/root and write HOME_DIR=/var/root
# into .env. Nothing here needs root except the symlinks, which prompt individually.
if [ "$(id -u)" = "0" ] || [ -n "${SUDO_USER:-}" ]; then
  fail "Do not run this under sudo — run it as your normal user."
  exit 1
fi
ok "macOS $(sw_vers -productVersion), running as $(whoami)"

# Xcode Command Line Tools. Not needed to compile anything: the only two native modules, node-pty and
# argon2, both ship darwin-arm64/darwin-x64 prebuilds and fall back to node-gyp only when a prebuild
# is missing for the running arch. (node-pty has no Linux prebuild — that is why setup.sh needs
# build-essential and this one does not.)
#
# They still matter on a fresh Mac, because `git` comes from them and the file browser shells out to
# it. Installing Homebrew below pulls the CLT in, so this is a note, not a gate.
if xcode-select -p &>/dev/null; then
  ok "Xcode command line tools ($(xcode-select -p))"
else
  warn "Xcode command line tools not found — Homebrew's installer will pull them in"
  echo "    Standalone: xcode-select --install (also what a fresh Mac needs for git)"
fi

if has brew; then
  ok "homebrew ($(brew --prefix))"
elif confirm SETUP_BREW "Homebrew is not installed. Install it?" y; then
  if /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"; then
    for candidate in /opt/homebrew/bin/brew /usr/local/bin/brew; do
      if [ -x "$candidate" ]; then
        eval "$("$candidate" shellenv)" || true
        break
      fi
    done
  fi
  if has brew; then ok "homebrew installed"; else note_failure "homebrew install failed"; fi
else
  skip "homebrew (declined — brew-based steps will be skipped)"
fi

# macOS ships zip, unzip, curl, python3 and openssl (LibreSSL) in the base system — none are
# installed here.
for builtin_tool in zip unzip curl openssl nc; do
  if ! has "$builtin_tool"; then warn "$builtin_tool not found (expected to ship with macOS)"; fi
done

# git needs its own check: /usr/bin/git is a stub on a Mac without the Command Line Tools, so
# `command -v git` succeeds while running it only pops the "install developer tools" dialog. The file
# browser shells out to git, so verify it actually executes. Invoking it here is deliberate — on a
# fresh Mac it triggers that install prompt early, rather than at first use inside the app.
if git --version &>/dev/null; then
  ok "git ($(git --version 2>/dev/null || true))"
else
  warn "git is not usable yet — accept the Command Line Tools prompt, then re-run this script"
fi

# ─── 1. homebrew packages ─────────────────────────────────────────────────────
step "Packages"

NODE_PREFIX=""
brew_install() {
  local formula="$1" probe="$2"
  if [ -n "$probe" ] && has "$probe"; then
    skip "$formula (already present: $(command -v "$probe"))"
    return 0
  fi
  if brew list --formula "$formula" &>/dev/null; then
    skip "$formula (already installed)"
    return 0
  fi
  echo "  Installing $formula..."
  if brew install "$formula"; then ok "$formula installed"; else note_failure "$formula install failed"; fi
}

if ! has brew; then
  skip "packages (homebrew unavailable)"
elif confirm SETUP_PACKAGES "Install node@22, bun and ffmpeg via Homebrew?" y; then
  # node@22 exactly — package.json's preinstall rejects anything else (`v < 22 || v > 22`), so plain
  # `brew install node` (currently v24+) would break `bun install`.
  brew_install "$NODE_FORMULA" ""
  brew_install bun bun
  # ffmpeg/ffprobe: the only external binaries the file browser shells out to besides git and zip.
  brew_install ffmpeg ffmpeg
else
  skip "packages (declined)"
fi

if has brew; then
  NODE_PREFIX="$(brew --prefix "$NODE_FORMULA" 2>/dev/null || true)"
fi

# ─── 2. node on PATH ──────────────────────────────────────────────────────────
step "Node on PATH"

# node@22 is keg-only, so Homebrew does not put it on PATH. `brew link --force` symlinks it into the
# Homebrew prefix (user-owned, already on PATH) — no sudo, and nothing lands in /usr/local.
if ! has brew; then
  skip "node link (homebrew unavailable)"
elif [ -z "$NODE_PREFIX" ] || [ ! -x "$NODE_PREFIX/bin/node" ]; then
  skip "node link ($NODE_FORMULA not installed)"
elif [ "$(command -v node 2>/dev/null || true)" = "$NODE_PREFIX/bin/node" ]; then
  skip "node already resolves to $NODE_FORMULA"
elif confirm SETUP_LINK_NODE "Link $NODE_FORMULA onto PATH (brew link --force)?" y; then
  if brew link --force --overwrite "$NODE_FORMULA" >/dev/null 2>&1; then
    ok "$NODE_FORMULA linked into $(brew --prefix)/bin"
  else
    note_failure "brew link $NODE_FORMULA failed — add $NODE_PREFIX/bin to PATH manually"
  fi
else
  skip "node link (declined)"
fi

# Verify node really is 22 — `bun install` fails its preinstall check otherwise.
if has node; then
  NODE_MAJOR="$(node -v 2>/dev/null | cut -d. -f1 | sed 's/^v//' || true)"
  if [ "$NODE_MAJOR" = "22" ]; then
    ok "node $(node -v)"
  else
    note_failure "node $(node -v) is on PATH but package.json requires exactly v22"
  fi
else
  warn "node not on PATH"
fi

# ─── 3. postgres ──────────────────────────────────────────────────────────────
step "PostgreSQL"

# Detect a reachable server first — this machine may already run Postgres in Docker, in which case
# there is nothing to install and nothing to start.
PG_PREFIX=""
PG_RUNNING=0
if nc -z -G 2 127.0.0.1 5432 &>/dev/null; then
  PG_RUNNING=1
  ok "postgres already reachable on 127.0.0.1:5432 — nothing to install"
else
  skip "no postgres on 127.0.0.1:5432"
  if ! has brew; then
    skip "postgres install (homebrew unavailable)"
  # Default yes: nothing is listening, so there is no Docker/remote server to reuse and Homebrew is
  # the only way this host gets a database.
  elif confirm SETUP_POSTGRES "Install and start $PG_FORMULA via Homebrew?" y; then
    brew_install "$PG_FORMULA" ""
    PG_PREFIX="$(brew --prefix "$PG_FORMULA" 2>/dev/null || true)"
    if [ -n "$PG_PREFIX" ] && [ -x "$PG_PREFIX/bin/pg_isready" ]; then
      echo "  Starting $PG_FORMULA..."
      brew services start "$PG_FORMULA" >/dev/null 2>&1 || true
      for _ in $(seq 1 20); do
        if "$PG_PREFIX/bin/pg_isready" -h 127.0.0.1 -q 2>/dev/null; then break; fi
        sleep 1
      done
      if "$PG_PREFIX/bin/pg_isready" -h 127.0.0.1 -q 2>/dev/null; then
        PG_RUNNING=1
        ok "postgres running"
        # Homebrew's postgres trusts local connections for the current user, so no password needed.
        if "$PG_PREFIX/bin/psql" -h 127.0.0.1 -lqt 2>/dev/null | cut -d'|' -f1 | grep -qw "$PG_DATABASE"; then
          skip "database '$PG_DATABASE' exists"
        elif "$PG_PREFIX/bin/createdb" -h 127.0.0.1 "$PG_DATABASE" 2>/dev/null; then
          ok "database '$PG_DATABASE' created"
        else
          note_failure "could not create database '$PG_DATABASE'"
        fi
      else
        note_failure "postgres did not become ready — try: brew services start $PG_FORMULA"
      fi
    fi
  else
    skip "postgres install (declined — supply a POSTGRES_URL below)"
  fi
fi

# ─── 4. pm2 ───────────────────────────────────────────────────────────────────
step "pm2"

# User-local npm prefix so global installs never need sudo.
export PATH="$HOME/.local/bin:$PATH"
if has pm2; then
  skip "pm2 ($(command -v pm2))"
elif ! has npm; then
  skip "pm2 (npm unavailable)"
elif confirm SETUP_PM2 "Install pm2 (process manager for the server + sidecars)?" y; then
  npm config set prefix "$HOME/.local" >/dev/null 2>&1 || true
  echo "  Installing pm2..."
  if npm install -g pm2 >/dev/null 2>&1; then ok "pm2 installed"; else note_failure "pm2 install failed"; fi
else
  skip "pm2 (declined)"
fi
# ~/.local/bin is not on the macOS default PATH (see /etc/paths). It is exported for this run, but a
# later `pm2 logs` from a fresh shell needs it permanently.
case ":${PATH}:" in
  *":$HOME/.local/bin:"*) ;;
  *) warn "add ~/.local/bin to your PATH so pm2 and claude stay available in new shells" ;;
esac

# ─── 5. agents (claude, opencode) ─────────────────────────────────────────────
step "Agents"

if has claude; then
  skip "claude ($(command -v claude))"
elif confirm SETUP_CLAUDE "Install Claude Code?" y; then
  echo "  Installing claude..."
  if curl -fsSL https://claude.ai/install.sh | bash; then
    if has claude; then ok "claude installed"; else note_failure "claude installed but not on PATH"; fi
  else
    note_failure "claude install failed"
  fi
else
  skip "claude (declined)"
fi
# No symlink needed: the claude sidecar resolves its CLI from CLAUDE_BIN, then PATH, then the
# installer's own locations (see resolveClaudeBin in sidecar/claude/claude-manager.ts).

if [ -x "$HOME/.opencode/bin/opencode" ]; then
  skip "opencode ($HOME/.opencode/bin/opencode)"
elif confirm SETUP_OPENCODE "Install opencode?" y; then
  echo "  Installing opencode..."
  if curl -fsSL https://opencode.ai/install | bash; then
    if [ -x "$HOME/.opencode/bin/opencode" ]; then
      ok "opencode installed"
    else
      note_failure "opencode installed but not at $HOME/.opencode/bin/opencode"
    fi
  else
    note_failure "opencode install failed"
  fi
else
  skip "opencode (declined — officer-opencode will not start)"
fi

# ─── 6. project dependencies ──────────────────────────────────────────────────
step "Project dependencies"

if ! has bun; then
  skip "bun install (bun unavailable)"
elif confirm SETUP_DEPS "Run bun install?" y; then
  echo "  Running bun install..."
  if (cd "$PROJECT_DIR" && bun install); then
    ok "dependencies installed"
  else
    note_failure "bun install failed"
  fi
else
  skip "bun install (declined)"
fi

# ─── 7. environment (.env) ────────────────────────────────────────────────────
step "Environment (.env)"

WRITE_ENV=0
if [ -f "$ENV_FILE" ]; then
  if confirm SETUP_ENV "$ENV_FILE exists. Regenerate it?" n; then WRITE_ENV=1; else skip ".env (kept existing)"; fi
elif confirm SETUP_ENV "Generate .env?" y; then
  WRITE_ENV=1
else
  skip ".env (declined)"
fi

ENV_PUBLIC_URL=""
if [ "$WRITE_ENV" = "1" ]; then
  echo ""
  ask ENV_PORT "PORT" "9010"
  # Plain http://localhost needs nothing relaxed to work: browsers treat it as a secure context, so
  # passkeys, microphone capture and the clipboard are all available without TLS, and origin checking
  # is already off by default (ALLOW_ANY_ORIGIN). Reaching this from another device is the case that
  # needs an HTTPS proxy — http://192.168.x.x is not a secure context and those APIs fail there.
  ask ENV_PUBLIC_URL "PUBLIC_URL" "http://localhost:$ENV_PORT"
  ask ENV_DATA_PATH "DATA_PATH" "$HOME/.local/data"
  ask ENV_ITEMS_DIR "OFFICER_ITEMS_DIR" "$(dirname "$PROJECT_DIR")/officer-items"
  # A Docker postgres usually wants a password; brew's trusts the local user. Default to the plain
  # local form and let it be edited — this is the one value the script cannot infer reliably.
  ask ENV_POSTGRES_URL "POSTGRES_URL" "postgresql://$(whoami)@127.0.0.1:5432/$PG_DATABASE"

  # jwt.ts throws at import time unless this is >= 32 chars, so verify rather than trust the pipeline.
  JWT_SECRET="$(openssl rand -base64 48 | tr -d '/+=' | head -c 48 || true)"
  if [ ${#JWT_SECRET} -lt 32 ]; then
    note_failure "could not generate a JWT_SECRET (got ${#JWT_SECRET} chars) — .env not written"
  else
    mkdir -p "$ENV_DATA_PATH" "$ENV_ITEMS_DIR" || warn "could not create DATA_PATH/OFFICER_ITEMS_DIR"
    if cat > "$ENV_FILE" <<ENVFILE
PORT="$ENV_PORT"
JWT_SECRET="$JWT_SECRET"
PUBLIC_URL="$ENV_PUBLIC_URL"
PUBLIC_BUILD_ENV="production"
DATA_PATH="$ENV_DATA_PATH"
OFFICER_ITEMS_DIR="$ENV_ITEMS_DIR"
HOME_DIR="$HOME"
POSTGRES_URL="$ENV_POSTGRES_URL"
ENVFILE
    then
      # Holds the JWT signing secret and the database URL.
      chmod 600 "$ENV_FILE" || warn "could not chmod 600 $ENV_FILE"
      ok ".env written to $ENV_FILE (mode 600)"
    else
      note_failure "could not write $ENV_FILE"
    fi
  fi
fi

# ─── 8. project initialization ────────────────────────────────────────────────
step "Project initialization"

if ! has bun || [ ! -f "$ENV_FILE" ]; then
  skip "initialization (bun or .env missing)"
elif confirm SETUP_INIT "Generate index.gen.html and apply the database schema?" y; then
  # index.gen.html is gitignored and built from PUBLIC_URL, so it never exists on a fresh clone.
  echo "  Generating index.gen.html..."
  if (cd "$PROJECT_DIR" && bun run gen:index); then
    ok "index.gen.html generated"
  else
    note_failure "gen:index failed — the app will not serve until this succeeds"
  fi

  # Officer applies its schema with push; there are no migrations.
  echo "  Applying database schema..."
  if (cd "$PROJECT_DIR" && bun db:push); then
    ok "schema applied"
  else
    note_failure "db:push failed — check POSTGRES_URL and that postgres is reachable"
  fi
else
  skip "initialization (declined)"
fi

# ─── 9. services ──────────────────────────────────────────────────────────────
step "Services (pm2)"

if ! has pm2 || [ ! -f "$ECOSYSTEM" ]; then
  skip "services (pm2 or ecosystem.mac.light.config.cjs missing)"
elif [ ! -f "$ENV_FILE" ]; then
  # Starting without .env gives a server on port 5000 with no database and a JWT_SECRET throw.
  skip "services (.env missing — they would crash-loop)"
elif confirm SETUP_SERVICES "Start Officer and its sidecars with pm2?" y; then
  echo "  Starting services..."
  if (cd "$PROJECT_DIR" && pm2 startOrRestart "$ECOSYSTEM"); then
    ok "services started"
  else
    note_failure "pm2 could not start the services — check 'pm2 logs'"
  fi
  if pm2 save >/dev/null 2>&1; then ok "process list saved"; else warn "pm2 save failed"; fi

  # `pm2 save` on its own writes a process list that nothing ever reads. The Linux setup pairs it with
  # `pm2 startup`, which installs the boot unit that resurrects that list; without the pair, a reboot
  # silently leaves the machine with nothing running. On macOS the equivalent is a launchd agent rather
  # than a systemd unit. Kept optional because a laptop is not a server — you may not want the whole
  # stack coming back at every login — and non-fatal, because pm2's launchd integration can want an
  # elevated prompt that a scripted run should not force.
  if confirm SETUP_BOOT "Start Officer automatically at login (pm2 + launchd)?" y; then
    if pm2 startup launchd -u "$(whoami)" --hp "$HOME" >/dev/null 2>&1; then
      pm2 save >/dev/null 2>&1
      ok "services will start at login"
    else
      warn "Could not install the launchd agent — run: pm2 startup  (and follow its instructions)"
    fi
  else
    skip "login startup (declined — 'pm2 startup' enables it later)"
  fi
else
  skip "services (declined)"
fi

# ─── verification ─────────────────────────────────────────────────────────────
echo ""
echo "═══════════════════════════════════════════"
echo "  Verification"
echo "═══════════════════════════════════════════"
echo ""

check() { if has "$1"; then ok "$1"; else fail "$1 — NOT FOUND"; fi; }

echo "Required:"
check node
check npm
check bun
check git
check zip
check ffmpeg
check ffprobe

echo ""
echo "Database:"
if nc -z -G 2 127.0.0.1 5432 &>/dev/null; then ok "postgres reachable on 127.0.0.1:5432"; else fail "postgres — NOT REACHABLE on 127.0.0.1:5432"; fi

echo ""
echo "Agents:"
check claude
if [ -x "$HOME/.opencode/bin/opencode" ]; then ok "opencode"; else fail "opencode — NOT FOUND"; fi

echo ""
echo "Process manager:"
check pm2

if has pm2 && [ -f "$ECOSYSTEM" ]; then
  echo ""
  echo "Services:"
  # Read the names with node rather than grepping for `name:`. The profile derives its apps from
  # ecosystem.config.cjs and has no literal name keys to match, so a grep silently lists nothing —
  # which looks identical to "no services configured". Loading it also exercises the profile's own
  # consistency checks, which is exactly the moment you want to hear about a drifted include list.
  ECOSYSTEM_APPS=$(node -e "require('$ECOSYSTEM').apps.forEach(a=>console.log(a.name))" 2>/dev/null) \
    || fail "$(basename "$ECOSYSTEM") could not be loaded — run: node -e \"require('./$(basename "$ECOSYSTEM")')\" to see why"
  for app in $ECOSYSTEM_APPS; do
    if [ -n "$(pm2 pid "$app" 2>/dev/null | tr -d '[:space:]' || true)" ]; then
      ok "$app"
    else
      fail "$app — not running (pm2 logs $app)"
    fi
  done
fi

echo ""
echo "═══════════════════════════════════════════"
if [ ${#FAILURES[@]} -eq 0 ]; then
  echo -e "  ${GREEN}Setup complete${NC}"
else
  echo -e "  ${YELLOW}Setup finished with ${#FAILURES[@]} problem(s)${NC}"
  for f in "${FAILURES[@]}"; do echo "    • $f"; done
fi
echo "═══════════════════════════════════════════"

echo ""
echo "Notes:"
echo "  • Open ${ENV_PUBLIC_URL:-http://localhost:9010} — the first-run screen creates the owner account"
echo "  • Logs: pm2 logs        Restart: pm2 restart ecosystem.mac.light.config.cjs"
echo "  • Postgres must be running before the services start, or db:push and boot will fail"
echo "  • Not run on macOS: VNC desktop, email sync, music indexer, cliamp audio, and the sidecars"
echo "    that front a container or an external service — vault, slskd, headscale, transmission,"
echo "    invoiceshelf, memos, photos, caldav, notify, wallet. See ecosystem.mac.light.config.cjs."
echo "  • Pin a specific Claude CLI with CLAUDE_BIN=/path/to/claude in .env if you need to"
echo "  • Re-run any single step with e.g. SETUP_OPENCODE=1 bash scripts/setup/setup_mac_light.sh"
echo ""