The preview asked `derived/` for a 640-wide rung and drew it about 1900 pixels wide — stretched three
times over, which reads as a poor photograph rather than as the wrong file. Raising the rung only moves
the problem: the box is most of a panel wide and can be zoomed on top of that, so any rung chosen in
advance is chosen wrong, and the widest one available is whatever the ladder happens to hold.
The original has every pixel there is. It is also, often, a HEIC that no browser can decode — which is
what av-club is for, and the platform already renders those for its own file browser through exactly
this path.
So there is a `/original/*` route: it resolves a path inside `originals/`, forwards to av-club's
`/v1/render` with a width, and streams back something a browser can draw. It decodes nothing itself.
That is the standing rule and the reason there is no image library in this plugin.
Not cached on disk, like the platform's own /render and for the same reason: a full-size render is
large, looked at once, and keyed on a width the panel chose. Caching it would fill a disk to make the
second look at one photograph faster.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A photograph is rarely the shape of the slot it goes in, so something decides which part survives. It
was a centred crop and no way to change it.
Dragging the picture slides the window; the wheel zooms, anchored to the pointer so the thing under the
cursor stays under it. Both write the site's own format — `x,y,w,h` in percentages of the ORIGINAL —
which is resolution-independent and survives the file being re-encoded.
Zooming in is the window getting smaller: w and h shrink together, keeping the slot's shape. Fit is the
floor, because you cannot show more of a photograph than there is, and at exactly fit the crop is
cleared rather than written as the centred value — a null crop and a crop that happens to be centred
should not be two states.
── The preview is not object-cover ──
It draws the rectangle: the picture scaled to `100/w` of the box and offset so the chosen corner lands
at the origin. object-cover shows the largest window of the slot's shape that fits and nothing else —
it can be panned and it cannot be zoomed, so a preview built on it would silently ignore half of what
this control produces.
── Also here ──
buildSite now hands the site an av-club URL and user. That is the first piece of publishing images
cropped rather than cropping them in the browser with CSS: the plugin knows the sidecar registry, the
site knows a URL. Inert until the site uses it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It was a read-only text box holding a path and a Browse button beside it. A path is not what anybody is
choosing — somebody picking the header photograph is choosing a PHOTOGRAPH, and reading
`ABOUT US/HEADER.jpg` to find out whether you picked the right one is doing the computer's job for it.
MediaField is the slot: empty, it is a dashed box at the page's own aspect ratio that you click or drop
onto; filled, it is the picture, with Change and Remove appearing over it on hover. The panel also stops
changing height as things are chosen, so a page with three slots starts to look like the page rather
than like a form.
── The aspect ratio is a prop and has to be ──
The header is 21:9, the product video 16:9, a gallery slot square. The component cannot know that and
must not guess: the SITE decides what shape a slot is, and a component that guessed would be a second
opinion to keep in step with the stylesheet. Both callers name the ratio their partial draws.
── Dropping ──
It accepts a drag from Officer's own file browser, which carries paths under
`application/x-officer-files` — the same payload that moves files between windows. So dragging a
photograph out of Media onto a slot is one gesture and no upload.
It does not accept a file from the desktop. That is an upload into originals/, a different operation
with its own failure modes, and the Media section already does it properly.
── Also ──
`thumbUrl` was copied into GalleriesPanel and RecordsPanel and was about to be copied a third time. It
is a module now: three copies of a URL shape is three places to be wrong about the rung when the ladder
changes, which it did four times in a day.
A file that has gone since it was chosen falls back to the empty state rather than a browser's
broken-image glyph, and says so.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every section had its own Save buttons — four on About, two on Home, one per record — and on a page
long enough to scroll, the button you wanted was the one that had just left the screen.
Now there is one, beside Publish, pinned above the scroll. The section announces whether it has unsaved
changes, whether it is busy, and how to save; the bar renders that. Neither knows what the other is,
which is what keeps DetailPanel a map of keys to components rather than a place that has to know what
each section can do.
── What this replaces ──
The per-card saves existed because the API treats an absent key as "leave it alone", so a Save carrying
everything meant a half-written manifesto shipping with a photograph somebody meant to change. With one
Save that is the model rather than an accident: one press writes the page you are looking at.
The cost, stated plainly: there is no longer a way to commit one part of a page and leave the rest.
Nothing here needed that, and if something ever does it wants its own verb rather than four buttons all
called Save.
── Dirty is a comparison, not a flag ──
Against what the server last returned, field by field. A flag says "something was typed" and stays true
after you undo it by hand; a comparison says "this differs from what is stored", which is the question
a Save button is actually answering — and it is what lets the button be dead when there is nothing to
do, which is the whole value of having one.
The gallery picker on Home is deliberately outside it and still writes on selection: a <select> that
needs a second press to mean anything is a control people believe they have already used.
Sections with nothing to save render no button rather than a dead one. A permanently disabled control
invites a press and teaches that pressing does nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
They were in the workspace's chrome header for an afternoon. Two things were wrong with that.
That header is shared furniture — every panel in the app draws it the same way — and these two buttons
belong to this plugin and to the site it administers, not to the frame around it.
And the panels scroll their own contents now. Anything drawn inside one leaves the screen as soon as
somebody reads to the bottom, which is exactly when they reach for Publish.
So the bar is a sibling of the scrolling region rather than the first thing inside it: `shrink-0` above
a `min-h-0 flex-1`, which is the same arrangement that makes the panels scroll at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Four sections could not be scrolled: About, and Gallery, Drops and Collabs, which are three
configurations of one panel. Both of those panels were written yesterday with `overflow-auto` and no
height, so they grew to fit their content and ran off the bottom of the workspace instead of scrolling
inside it.
`overflow-auto` only does something on an element with a height to overflow. DetailPanel gives its
child `min-h-0 flex-1` inside a `size-full` column, so a panel that says `size-full` fills exactly that
box and scrolls within it — which is what Home, Galleries and Administration were already doing and
what these two were copied from without.
Messages had the same fault in a different shape. Its list is a flex child with `flex-1 overflow-auto`,
and a flex child defaults to `min-height: auto` — it refuses to shrink below its content, so the list
grew the panel rather than scrolling. `min-h-0` is what lets it shrink, and therefore what makes the
overflow mean anything.
Audited the rest rather than fixing the reported ones: every panel with an `overflow-auto` now pairs it
with a height, and the two that have none are centred single screens with nothing to scroll.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Four bands in the order the page shows them, which is the sitemap's shape exactly: a HEADER of a
photograph and a phrase, then ABOUT US, then PRODUTO with a video beside its text, then MANIFESTO.
No schema change and no API change — `about_content` already carries every one of those columns and
`aboutRouter` already reads and writes them. This is the screen that was missing, not the data.
One save per band, the rule Home follows and for the same reason: `take()` treats an absent key as
"leave it alone", so a single Save carrying every field would let a half-finished manifesto ride along
with a photograph somebody meant to change.
Both media slots go through MediaPicker rather than a text field. A path somebody types is a path that
is wrong by one character and renders as a broken image. One picker serves both, with `picking` naming
which slot asked — two would be two copies of a modal that already knows how to browse originals/.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It sits behind the proxy that terminates TLS, so it believes it is serving plain HTTP. Asked for
/home/gallery/16 it correctly redirects to the directory and wrote the Location as
http://host/home/gallery/16/ — downgrading an HTTPS visitor to HTTP for a round trip before the proxy
sent them back where they came from.
absolute_redirect off emits just the path, and the browser keeps the scheme it already had.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
They answer different questions, and the difference is not obvious from the words:
Publish copies what you edited in development over production, then renders the site.
Build renders production as it already is. Nothing moves.
Publish is the one to press after editing anything. Build is for when the content is already promoted
and only the code changed — a template fix, a new rendition ladder, a failed build to retry. Offering
only Publish would mean every retry of a build also re-copied a database and took another backup,
which is a lot of machinery for "try that again".
Build reads first and quieter, Publish last and solid: the row runs towards the action somebody
actually came for.
One busy state and one failure panel between them, because only one can be running.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Publishing is the last step of every edit — write something on Home, choose a gallery, add a drop, then
make it public. It lived in one card at the bottom of one section, so finishing a change meant leaving
the thing you were working on to go and find it. Somebody who does not know the panel does not find it
at all, and concludes their edit is live when it is not.
Administration's card stays. Two entry points to one action is right here: that card belongs to a row
about the production server and reports what a build produced, while this is the verb at the end of a
sentence somebody has just written.
It takes minutes and says so, because a button that greys out and does nothing visible for three
minutes reads as broken and the second press is somebody assuming the first did not register.
Failure opens a panel under the header rather than replacing the label. The server's own words are
usually a build error, which is long and worth reading, and a header is one line. Positioned absolutely
so nothing shifts, and it stays until dismissed — a message that vanishes on a timer is one somebody
was still reading.
Disabled until `useReady`, the same answer the nav uses to lock the sections, so the button is
available exactly when the sections are.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It existed to make a bisect bearable — rendering all 48 routes to measure one of them was most of the
wait. The bisect is over and the switch is not something to leave lying in a build script, because it
also disables the prune at the swap, and a build that quietly does not clean up after itself is worse
than a slow one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A smooth kernel interpolates. On a photograph that is right; on a drawing it is destructive in a way
that shows up as SIZE rather than as blur — a logo with 174 flat colours downscaled with lanczos3
comes out with thousands of interpolated ones, and the lossless encoder that was winning a moment ago
then has to describe every one.
Measured on fofos-logo-saffron at 160 pixels, all lossless:
lanczos3 13,356 mitchell + nearLossless 7,982
mitchell 9,854 nearest 3,436
The whole 300-pixel original is 8,886. Every smooth option produced a 160-pixel file heavier than the
full-size one, which is what "the ladder made it worse" looks like from the inside.
The cost is real and accepted: nearest at a fractional scale drops rows rather than blending them, so
edges alias. These renditions are shown smaller than they are and the browser's own downscale smooths
what nearest left behind — a 160-pixel logo in an 80-pixel slot is where this lives.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It probed at 96 pixels and got the answer wrong on exactly the file it was written for. Downscaling a
logo to 96 resamples its flat areas into gradients, so by the time the probe sees it, it already looks
like a photograph. Lossy wins that comparison, and the verdict is applied to every rung above — where
the flat areas are still flat and lossless would have won by a wide margin.
fofos-logo-saffron came out with a 13,074-byte 160-pixel rung and a 22,432-byte 256-pixel one, beside
a 9,144-byte 300-pixel original. Three files larger than the thing they were made from.
480 now, or the source's own width when it is smaller — which is the case that matters, because that
is what a logo is. Not the full size: a picture is still recognisably itself at 480, and probing a
4000x6000 photograph losslessly to learn something already obvious is minutes of encoding across a
library.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
160 was still not a floor. A logo renders at 80 CSS pixels, which is 140 device pixels on an ordinary
phone and 80 on a plain one, and the smallest rung being 160 meant the plain screen had nothing to
take but the retina file.
96 and 128 cost a few hundred bytes each and only exist for things this small — a logo, an icon, an
avatar. Every photograph in the library skips them, because nothing is ever upscaled and a rung wider
than the source is not written.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Lossy WebP is built for photographs — it discards detail the eye does not miss in something full of
texture. A logo is the opposite: flat areas, hard edges, a handful of colours. Encoding one lossily is
worse than useless twice over. It softens the edges, and it makes the file BIGGER, because flat
regions are exactly what lossless compression is good at and exactly what lossy encoding turns into
gradients it then has to describe.
Measured, not theorised: fofos-logo-saffron.png is 300x300 and produced a 22,432-byte 256x256 rung
beside a 9,144-byte full-size one. A smaller picture, two and a half times the file.
The decision is measured too. Every heuristic for this is wrong somewhere — a PNG can hold a
photograph, a JPEG can hold a diagram, plenty of logos are opaque — so it encodes the smallest rung
both ways and keeps the answer. One extra encode of a 160-pixel image per original, and what comes out
is not an opinion about the file: it is the file saying which encoder suits it. Applied to every rung,
because an image does not stop being a drawing at 640 pixels. Recorded in the manifest, because
somebody wondering why one directory is shaped differently should find the answer rather than
re-derive it.
Two other things the logos exposed:
The ladder had no floor. It started at 320 and a logo renders at 80, so fofos-logo-black got a single
12,350-byte rung against a 12,678-byte original — a ladder that saved 328 bytes. 160 and 256 are now
the bottom, and 128 and 192 on the square side.
And square crops of things already square. Both logos are 300x300, so their square rung cropped
nothing: the same image under a second name. The aspect ladder already produces squares for a square
source. 2% tolerance, because a 1000x1002 photograph is square for every purpose this serves.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three sections, one panel, configured — the same split the site's API already makes. Each is a titled
record with an ordered list of media hanging off it, and the only real differences are what the title
is called and which extra fields the record carries.
The htmx admin had three screens and that was defensible there, because each carried its own markup as
well. There is no markup to differ here, so three panels would be three places to fix one ordering bug.
The `fields` list in records.ts is the FORM for what the server allows, not a second authority over it.
What may actually be written is decided by `valuesFrom` in the site's sections.ts, per section, as an
allowlist — a key added here that the server does not accept is an input that silently saves nothing.
Which record is open lives in `?record=<id>` beside `?section=`, per docs/navigation-audit.md, and the
detail is loaded from that id rather than carried over from the list. That is what makes a typed or
reloaded URL work, and it is guarded against a slow response for a record nobody is looking at any
more overwriting a fast one for the record they opened next.
Ordering sends every id in the order it should be, so two items cannot claim one position. Media is
added one path at a time because the server appends, and a parallel add would land in whatever order
the requests happened to finish.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The hero declares a sizes well under its real width on phones so the browser stops multiplying by the
pixel ratio and asks for roughly one image pixel per screen pixel. 448 is the rung that lands on a
412-wide phone once that cap applies; without it the nearest was 512.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The still is the input for three things — the placeholder, poster.webp, and now the poster rungs — and
it is removed once they are done. I added the rung loop BELOW the removal, so sharp was handed a path
that no longer existed and every video failed to convert.
The comment warning that these lines are ordered deliberately was three lines above the mistake.
The removal now sits after everything that reads it, which is where it should have been all along
rather than in the middle of the sequence.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A poster was one file at the video's full size — 1280x720 for a hero displayed 412 CSS pixels wide.
Three times the pixels a phone can show, on the element that IS the page's Largest Contentful Paint,
which is the most expensive place on the site to be careless.
384, 512, 768, 1024, plus poster.webp as the widest rung. Those are viewport widths times the density
behind them: 412 at 1.75 wants 768, a tablet wants 768, a desktop wants 1280.
Cut from the still rather than from poster.webp, so each rung is scaled once from the original frame
instead of being a re-encode of an encode. poster.webp keeps its name — the placeholder is cut from
it, the site falls back to it, and a directory built before this has only that one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The ladder was 320, 480, 640, and the middle of that was the problem. A gallery slot measures 193 CSS
pixels on a phone, so at 1.75x it needs 338 device pixels — which did not exist, so the browser
correctly took 480 and downloaded 1.4x the pixels it could use.
Now 256, 384, 480, 640, 960, which is 193 and 475 CSS pixels times the densities people actually hold.
960 is the other end of the same mistake: the ladder stopped at 640, so a retina desktop wanting 950
took 640 and showed it soft.
A rung is a few kilobytes of square WebP. A missing rung is paid for on every visit by everyone whose
screen falls in the gap.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A gallery grid is square slots and the ladder is the picture's own shape, so a 480x720 portrait
arrived, object-cover cropped it to 480x480 in the browser, and a third of every file was discarded
before anyone saw it. Measured here: 108,388 bytes shipped where a 480x480 crop is 70,070.
Cropping in the browser is the right default when the shape is unknown. It is the wrong one when the
shape is known at build time, and for a carousel of square thumbnails it always is.
Thumbnail widths only — 320, 480, 640. Anything larger is a picture being looked at, and a square crop
is a loss of information that only makes sense when the slot demands it.
Centre, never sharp's `attention`. Smart cropping decides differently for every picture, so a row of
thumbnails framed by an algorithm has no common logic to it and the one it gets wrong cannot be
predicted or explained. Centre is what a photographer framing for a square already assumes.
It is a default: a placement carrying its own crop keeps the aspect file and frames it in CSS, because
that crop is a person saying which part matters. Nothing here knows about placements, and should not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Quality 82 went on every rung, so a picture 173 CSS pixels wide in a gallery grid carried the same
fidelity as the copy somebody opens full screen. Compression artefacts scale with display size: at
thumbnail size 74 is indistinguishable from 82 and 15% smaller — 108,388 bytes to 92,568 on the worst
image in this gallery, measured rather than assumed.
640 is the line because it is the widest rung a phone picks for a grid slot. Above it something is
showing the picture large, and 82 is the right answer again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The comment I added used backticks around ?v= and no-cache, inside a template literal. That closed the
string early and made the file unparseable — committed and deployed before the typecheck was read.
Caught by tsgo immediately afterwards; officer stayed online because pm2 kept the previous module
loaded, but the next restart would not have come back.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Seven days was correct while the URLs were bare: a stable name with a long life means somebody running
last week's script against this week's markup.
The site's layout now stamps every asset URL with the build's id, so a build that changes a file
changes its URL, and the HTML carrying those URLs is no-cache and revalidated every visit. The two
cannot disagree, which is what earns `immutable` and a year.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The ladder went 320 then 640, and a phone lands between them. Lighthouse measured the home gallery's
slots at 454 device pixels; with only those two rungs the browser correctly took 640, which is a
184 KB file for a 454-pixel slot — and the same on every image in that carousel.
A rung is one more WebP beside files that already exist, chosen only when it fits better than its
neighbours. Not having it is paid for on every visit.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It was reachable only when the SOURCE was smaller than 720, which is backwards: the rung a phone wants
is the one a 720p master never produces. The hero here is 1280x720 and the only file that existed for
it was 7.8 MB of 720p, served to every device.
`b:a` overrides the preset's 96k with 64k. The audio on a hero loop is ambience, and 64k AAC carries
it — the same argument as the preset's crf 26 for the picture. The rung exists for a phone on a mobile
connection and every kilobit is one it is paying for.
The override goes through av-club's documented contract: a preset supplies the options and anything
passed explicitly wins.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
TEMPORARY, and inert unless set. Bisecting a Performance score means a build between every
measurement, and rendering all 48 routes to change one of them is most of the wait.
FOFOS_BUILD_ONLY is passed through to the site's build script, which renders only the listed paths and
— the part that is not optional — skips the prune at the swap. The swap deletes anything in dist/ that
the run did not stage, so a one-page build would otherwise take every other page of the live site with
it, 404 until the next full build.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Everything sat at seven days, which Lighthouse counts as short for a file that never changes.
/fonts/ now gets a year and `immutable`. A typeface is not edited — it is replaced, and a replacement
arrives under a new name. It is the one directory here where a long life cannot pin something stale.
Everything else stays at a week deliberately. Those names are stable across builds and the HTML that
references them revalidates every time, so a longer life means somebody running last week's stylesheet
against this week's markup. Fingerprinted filenames are what would earn a year, and the build does not
write them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A photograph here is 189 KB of tufted yarn — high-frequency detail in every pixel, which is the worst
case for any lossy codec and not something a quality setting can fix. Re-encoding the same original
with ImageMagick at the same quality 82 gives 199 KB, so av-club is already slightly ahead of a
reference encoder. The 858 KB Lighthouse wants back is not available without softening the texture
the site exists to sell.
What was available was the wait. Each ladder now carries the picture at 16 pixels wide as a `data:`
URI inside its manifest — 300 to 500 bytes — and the site paints it as the image's own background. It
costs no request, which is the point: a placeholder you have to fetch is a smaller version of the
problem. When the real photograph arrives it paints over its own background and the placeholder is
gone, with no load handler, no class to remove and nothing to clean up if the script never ran. The
blur is the browser stretching 16 pixels across the box.
Videos take theirs from the poster still, before it is deleted — the same frame, so the two agree, and
sharp can read a JPEG where it cannot read an MP4.
── Existing directories are topped up, not rebuilt ──
The obvious move is to make `upToDate` insist on a placeholder, which turns all 62 ladders stale and
re-derives the library: minutes of CPU and 67 MB rewritten to add 400 bytes to each. Every rung in
them is already correct.
So `topUp` makes only the missing piece, and reads `320.webp` rather than the original — already
small, already browser-readable, already rotated. Going back to a 4000×6000 HEIC to produce a
16-pixel picture is the expensive half of a rebuild and precisely what this avoids. A directory with
no small rung is skipped rather than forced.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`http2_support: true` is the default now and is set when a host is secured, but both hosts here were
created and secured before either change, so nothing re-runs and they stay on HTTP/1.1 forever.
Lighthouse costs that 670 ms.
An explicit action rather than a fix applied on load: a panel that silently rewrites the proxy while
somebody is reading it is not a thing to build, and the change reloads nginx for every site behind it.
Only offered where it can do something — a host with a certificate that lacks it. HTTP/2 is negotiated
during the TLS handshake, so on a plain host the field is stored and never used, and the button would
do nothing visible. A host created since the default never shows it: this is a repair, not a setting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Created with `http2_support: false`, so the live site runs HTTP/1.1 — six connections and everything
else queued behind them. Lighthouse costs it 900 ms, most of it the gallery images waiting on each
other.
Set in the defaults and again in `attach`, because HTTP/2 only means anything once there is a
certificate. A host created before this — both of them here — is secured but still on 1.1, and the
attach path is the one that can fix it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`nginx:alpine` ships a config that serves the directory and does nothing else: no compression, and no
cache headers at all. Every asset on the live site carried a TTL of zero, so a returning visitor
re-downloaded all of it — 1.1 MB by Lighthouse's count.
Written out on every start rather than kept as a file somebody edits, so what nginx does is decided in
this file and cannot drift from it.
Three lifetimes, because there are three kinds of file. `derived/` renditions are rebuilt IN PLACE —
av-club replaces the contents of `1280.webp` rather than writing a new name — so they cannot be
`immutable` however much they look like they could be, or a re-crop stays invisible for a year to
everyone who saw the old one. Bundled assets change only when a build runs, and a build changes the
HTML that names them: a week. HTML revalidates every time, because anything longer makes a publish
invisible to whoever already visited, which is the one failure that makes the whole panel look broken.
`^~` on the prefix locations. A regex location beats a prefix location in nginx, so the extension rule
would otherwise capture /derived/…/1280.webp and give it the wrong lifetime.
Validated with `nginx -t` in the real image rather than by reading it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
pg_dump warns that `service_nodes` carries a circular foreign key and that a --data-only dump of it
may not restore. Today the rows come out parents-first and it loads either way, but the previous shape
made that a load-bearing accident: truncate in one psql call, load in the next, so the day the
ordering changes the live site is left EMPTY until somebody notices and restores by hand.
Both statements now run as one transaction — TRUNCATE is transactional in Postgres — with foreign-key
checks off for the session. A failed load rolls the truncate back with it.
Verified against a scratch copy of production rather than reasoned about: a `create database ...
template fofos_website`, a deliberately failing load, and all nine rows still there afterwards. The
same copy confirmed what the real run will do — gallery and its nine items promoted, hero pointing at
the new file, and `users` and `contact_submissions` untouched at 2 and 8 rows.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The admin edits development and the build renders production, so nothing written in the panel could
reach the live site. Build was only half of publishing, and the missing half was invisible: it
succeeded, against the content somebody last promoted, and a successful build of yesterday's site
reads as a broken renderer.
Publish copies the site's content tables across and then builds. Two things it will not copy: `users`,
because production's logins are not development's and nobody should be locked out of the live site to
publish a photograph; and `contact_submissions`, the legacy inbox, because development's is empty and
production's is not — copying it would destroy real messages in order to publish nothing.
The table list is written out rather than derived. A table added later should be considered rather
than swept along, and an empty development table quietly overwriting production-only data is
discovered far too late to fix.
Order is load-bearing in two places. Production is dumped before anything is destroyed, and the
publish refuses to start if that dump fails. Development is read BEFORE production is cleared, so a
failure to read leaves production untouched rather than empty for a reason that had nothing to do with
it. `TRUNCATE ... RESTART IDENTITY`, so the sequences the copy sets are not merely ahead of the rows
it inserts — otherwise the collision arrives on the client's next save, hours later, somewhere else.
`backupAfterPublish` has been sitting in backups.ts without a caller since the day "On publish" became
a backup schedule. This is the caller.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Managing items on the page would be a second editor for something that already
has one, and the two would drift — a caption fixed in one place and not the
other. The page chooses; the Galleries section arranges; every page using that
gallery changes with it.
The list of galleries is read from the section that owns them rather than
embedded in the home payload, because a copy there would be stale the moment
somebody edited one.
While no gallery is chosen the old per-page rows still render, and the panel says
so — a carousel that appears to come from nowhere is worse than a sentence.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`readdir` returns entries in the filesystem's own order — inode order on ext4 —
which is arbitrary and stable only until somebody moves a file.
Harmless for the sync, which does the same work whatever the order. Not harmless
for "Create Gallery": that list becomes the gallery's initial order, and nine
photographs arriving as 05, 08, 01, 07 reads as a bug even though nothing is
wrong.
`numeric` collation, so galeria2 sorts before galeria10 — which is what anybody
naming files that way means.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An <img> cannot send an Authorization header, which is why user-middleware and
the permission gate both already accept `?token=` — it is exactly what the file
browser's own thumbnails do.
Built without it, every picture 401'd while the layout looked perfectly correct:
the space was reserved, the rows were right, and nothing appeared. The route was
fine and had been tested with a bearer token, which is precisely the case the
browser cannot reproduce.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The thumbnail comes from the DERIVED ladder, which is the point of the whole
pipeline: most of these are HEIC and a browser cannot display the original at
all. 320 is the smallest rung and still sharp at this size.
Served by this plugin from disk rather than by the site. The panel talks to the
plugin and the catch-all forwards everything to the site's /api/admin, which is a
different route — and more importantly, looking at a gallery should not require
the development server to be running. Editing the site is not the same as
reading it.
Not under /_config, because that prefix is owner-only and a thumbnail is not a
credential: a member who can open the section can see the pictures in it, which
is what the section is. Registered before the catch-all, or the catch-all would
forward it to fofos.
Path traversal is refused by resolving first and comparing against the directory
plus a separator — a bare startsWith accepts `derived-old` for a root of
`derived`.
An item whose conversion has not run has no rung, and the thumbnail hides rather
than showing a broken-image glyph, which reads as corrupt rather than pending.
Captions save on blur. A caption is a sentence somebody is in the middle of, and
a request per keystroke would be wasteful and a race with itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`listOriginals` already includes the prefix in what it yields — it builds
`prefix/name` as it descends — so prefixing again produced
Home_Page_Gallery/Home_Page_Gallery/…, a real-looking path to nothing.
Found by calling the route rather than reading it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A bare fetch was returning 401: Officer's API authenticates with a bearer token,
not a cookie, and only the hook holds it. The browser now supplies an
authenticated client in the action's context.
It stored the folder. What somebody right-clicks is a directory; what a gallery
holds is pictures — obvious the moment you look at the result, and not before.
Expanded by the server, because that side already knows which extensions are
media and how to walk the tree. It is the same `listOriginals` the sync uses, so
a gallery cannot end up holding a file the pipeline would never convert.
Recursive, deliberately: a folder of folders is still "these pictures", and
refusing to descend would silently miss most of what was pointed at.
An expansion that returns nothing creates nothing. Falling back to the folder
itself is exactly the bug being fixed, and doing it quietly is worse than doing
nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The section reads the site's own admin API, so it requires a CONNECTION where
Media beside it requires only a root. The difference is real rather than
copy-paste: Media is a file browser over a folder on this disk, while a gallery
is a row in the site's database — opening it without the site answering would be
a screen where every action fails.
The context action hands its selection over in the URL and sends you to the
panel rather than opening a dialog of its own. Naming a gallery, seeing the slug
it will get and watching the items land belongs on the screen that owns
galleries, not in a modal over a file browser that would then have to explain
where the result went.
It offers itself only inside originals/, because a gallery item is a path
relative to that folder and an entry that appears everywhere while working in one
place is worse than one that appears where it works. The test is on the PATH, not
on which panel is open — the same browser is mounted in several places and only
the path says where it is pointed.
A mixed selection is refused. A folder among files is either a mistake or a
request to recurse, and neither is something to guess from a right-click.
The handoff is consumed once and stripped from the URL. Left there, a refresh
would create the gallery again, which somebody discovers as four copies.
Nothing is written until Create: the folder's name is a suggestion in the field,
not a decision already taken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
You should not have had to press Sync. Nine files moved into a folder and
nothing noticed.
Two gaps, and neither would have caught it. The platform's event bus emits
`files:uploaded` and `archive:extracted` — things Officer's own file browser
DID — so a move emits nothing at all, and neither would an rsync, a drop over
SMB, or anything done in a terminal. And no plugin subscribes to hooks anyway.
That is not a bug in the bus: it reports actions, and this needs to know about a
directory. So a filesystem watcher, the same shape as the mailbox one already
here.
The debounce is twenty seconds and long on purpose. A move of nine files is
dozens of events and an upload of two hundred is thousands, while a sync walks
the whole tree — so waiting for quiet means one run after the dust settles rather
than one per file. Being slightly late costs nothing, because the sync skips
everything already current; being eager costs a full walk per event.
It cannot feed itself: only originals/ is watched and the sync writes only to
derived/. Worth stating, because the opposite arrangement is a loop that looks
like a busy machine and nothing else.
A run already in flight is left alone rather than queued — it walks the tree when
it starts, and whatever lands after that is what the next quiet stretch is for.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Moving a file into a folder made the sync look at a new path, find nothing, and
convert it again — minutes of work to produce bytes that already existed a
directory away — while the old folder stayed behind forever, because nothing ever
deleted one.
A move preserves size and mtime, and both are already in the manifest and in the
stat. So the sync indexes what is already derived on that pair, and a file that
has moved has its ladder RENAMED across.
An ambiguous match is refused rather than guessed. Two originals can share a size
and an mtime — a camera dump can write a whole card in one second — and
rebuilding is merely slow where attaching the wrong photographs to a name is
wrong.
Orphans are removed afterwards, and only on a WHOLE-TREE sync. A scoped run knows
about one folder, so everything outside it looks abandoned; deleting on that
basis would take out the library the first time somebody re-synced a subfolder.
Safe otherwise because derived/ is reproducible by definition, which is what its
name has meant since these two folders stopped being called `user` and `treated`.
Both are counted, recorded in the ledger and shown only when they happened, so an
ordinary run stays one short line.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Galleries become an entity rather than a list hanging off a page: a set of media
somebody has chosen and put in an order is a decision worth keeping once, not
remaking on every page that wants it.
Pinned with Media and above it, because the two are the same kind of thing — the
raw material the site is built from, held on this machine. Media is the files; a
gallery is a chosen, ordered subset of them.
`requires: 'root'`, not `'connection'`. A gallery is made of originals on this
disk, so it is reachable as soon as there is a root location. Gating it behind a
site connection it does not use is the bug that made that distinction necessary
in the first place, and Media already learned it.
Not built yet, so it renders the Planned card — the entity is the next piece and
this is where it will live.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Nobody knows the path of a file they uploaded from a phone, and a text box
invites a typo that fails silently as a broken image on the live site. Browsing
`originals/` means the only values that can be stored are ones that exist.
The modal is the platform's file browser in pick mode — the same listing,
breadcrumb, sorting and thumbnails as everywhere else, with one branch changed.
It browses ORIGINALS and the site renders DERIVED, and that indirection is the
point of the pipeline: what somebody picks is the .mov or the 12-megapixel HEIC
that came off the camera, and what a browser can display is the ladder av-club
built beside it. Storing a derived file directly would pin the site to one
rendition, so the day the ladder changes every stored reference names a file that
is no longer the right one to serve.
The path is stored relative to `originals/`. The root is a setting and moves
between machines, so an absolute path would be a fact about one installation
written into content that outlives it.
No pathParam and no panelId on the modal's browser: its folder is not something
to put in a URL or remember, and both would leak a transient choice into shared
state.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The page reads hero-then-intro and this deliberately does not. The intro is the
thing that gets edited; the hero is a path that changes once a season. Ordering
by what somebody came to do beats mirroring the layout of the page they are
describing.
One PATCH per card, carrying only that card's field. `take()` on the server
treats an absent key as leave-it-alone, so sending the whole object from either
card would have each one saving the other's unsaved edits — a half-finished
intro riding along with a hero somebody meant to change.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two things.
`?media=` is Media's own folder and now goes when you leave it. It survived
every navigation, so `?section=home&media=GALLERY/CALAVERA+1` was an ordinary
URL — a parameter naming a folder in a section that is not open, carried into
every link and shared or bookmarked that way.
And the intro is a tiptap editor rather than a textarea of raw HTML. HTML in and
HTML out, because that is already what the site's database holds and renders —
introducing a second format would buy a migration and a round-tripping bug class
for nothing.
Declared as the PLUGIN's npmDependencies, not added to the platform's
package.json. That lockfile is frozen and shared, and npm-deps.ts exists for
exactly this: everything lands in plugins/node_modules/, so a plugin's editor
cannot move a version the platform depends on.
The toolbar is only what the site's stylesheet can render. Anything more would
produce copy that looks right while editing and wrong when published, which the
person only discovers after saying it was done.
The content effect compares against getHTML() before writing back, and that
comparison is the whole thing: while somebody types the two already agree, so
nothing is pushed in and the caret stays put. Without it this is the classic
controlled-contentEditable bug where the cursor jumps to the end on every
keystroke.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Hero, intro and an ordered gallery — the shape the old htmx admin had, as a
panel here.
Every write returns the WHOLE payload and this never patches its own state from
what it sent. That matters more than it looks: the server clears the hero crop
when the hero changes, because a rectangle describing a region of a different
picture would crop the new one somewhere arbitrary. A client keeping its own
copy would go on showing a framing the server had already discarded.
Ordering sends every id rather than one item's position, which is what makes it
impossible to end up with two things claiming the same place.
Thumbnails load through this plugin's proxy rather than straight from the dev
server, so they arrive with the session instead of requiring the browser to
reach a port on the host.
It edits DEVELOPMENT, because production is a directory of static files with no
API to write to. An edit lands on dev immediately and becomes public when
somebody presses Build.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`ready` was hardcoded false for as long as the sections proxied to an address
nobody could set — the connection form was removed and nothing replaced it, so
nine doors led to the same "not connected" message.
Both halves exist now and neither is typed by a person: the development server
runs on a port this plugin chose, holding a FOFOS_API_TOKEN this plugin
generated and handed it at start. So the credentials are DERIVED rather than
stored. Asking somebody to copy a value out of one part of this plugin into
another was never a setting, it was a chore.
Development and not production, and that is not a preference. Production is a
directory of files behind nginx — no API, no database, nothing listening — so
editing against it is impossible rather than merely wrong. Sections read and
write dev; Build is what publishes. An edit is visible immediately and public
only when somebody decides it should be.
The gate asks whether the server ANSWERS, not whether pm2 says online. `bun
--hot` survives a crash at startup: the process stays up, pm2 reports online,
and nothing is listening. Opening nine sections onto that would make one failed
boot look like nine broken screens.
And when /status itself cannot be reached, `configured` stays true while `ready`
goes false. Telling somebody they have set nothing up is alarming and wrong;
opening nine sections onto a server we could not confirm is answering is nine
screens that each fail separately. Cannot-tell keeps them shut and lets the next
poll open them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
pastilhasandClaude Opus 5