platform/scripts/setup/machine-setup/lib/dev.sh

#!/bin/bash
# =============================================================================
# machine-setup — the development environment
# =============================================================================
#
# Definitions only, like the other lib/ files.

[[ -n "${MACHINE_SETUP_DEV_LOADED:-}" ]] && return 0
MACHINE_SETUP_DEV_LOADED=1

# -----------------------------------------------------------------------------
# git
# -----------------------------------------------------------------------------
#
# Read and written as the account, not as root. `git config --global` writes to
# $HOME/.gitconfig, so running it under sudo without -H would write root's.
#
# ── Why this asks before touching an existing identity ──
#
# The original set all four values unconditionally on every run. Re-running it on
# a machine somebody already uses replaces the name and email they had with
# whatever is typed — and prompt_value accepts an empty answer, so pressing
# Enter twice wrote `user.name = ""`. An empty name is worse than none at all:
# unset makes git refuse to commit and say why, empty makes it commit with a
# blank author and never mention it.
#
# ── And why it is worth being careful about here in particular ──
#
# docs/agent-git-identity.md: every agent Officer runs commits AS THE OWNER,
# because it runs as the owner. So this is not only the human's identity — it is
# what `git log` will attribute every agent commit on this machine to.

# Run from / rather than wherever the script was launched.
#
# `git config --global` reads and writes $HOME/.gitconfig and needs no repository
# — but git still stats the working directory on the way, looking for one. The
# script is typically launched from somewhere under the invoking user's home,
# which is 0750, so the target account cannot stat it and every call dies with
#
#   fatal: failed to stat '<cwd>': Permission denied
#
# Found because the writes failed silently: the section reported "written" while
# nothing had been. Both wrappers now run in a subshell from /, which every
# account can stat, and their exit status is checked by the caller.
# `git config --get` exits NON-ZERO when the key is simply unset, and
# `VAR="$(git_get …)"` propagates that under `set -e`. So on a machine where git
# has never been configured — the fresh machine this script exists for — reading
# the current value aborted the run before the section had printed anything.
# Missing a value is an answer here, not a failure.
git_get() { (cd / && sudo -H -u "$USERNAME" git config --global --get "$1" 2>/dev/null) || true; }
git_set() { (cd / && sudo -H -u "$USERNAME" git config --global "$1" "$2"); }

# Is there anything configured at all?
git_has_identity() { [[ -n "$(git_get user.name)" || -n "$(git_get user.email)" ]]; }

# Ask for a value that must not be empty. The original's prompt accepted empty
# and wrote it; this re-asks.
ask_required() {
  local __var="$1" message="$2" default="$3" answer=""
  while [[ -z "$answer" ]]; do
    if ! read -rp "  ${message}${default:+ [$default]}: " answer; then
      echo ""
      fail "No answer."
    fi
    answer="${answer:-$default}"
    [[ -z "$answer" ]] && warn "This one cannot be left blank."
  done
  printf -v "$__var" '%s' "$answer"
}

# -----------------------------------------------------------------------------
# Shell
# -----------------------------------------------------------------------------
#
# ── One starship config, not two ──
#
# The platform deploys scripts/setup/starship.toml into every member's home
# (os-user-shell.ts), and the comment there calls it "the prompt config the
# owner's own install uses — one file, both audiences". That was not true: the
# original machine script wrote a DIFFERENT config inline, so the owner got one
# prompt and every member got another. This deploys the same file the platform
# does, which makes the comment true rather than aspirational.
#
# It lives one directory up because it is shared with the platform, not owned by
# this script.
STARSHIP_SRC="${STARSHIP_SRC:-$SCRIPT_DIR/../starship.toml}"

user_login_shell() { getent passwd "$USERNAME" | cut -d: -f7; }

oh_my_zsh_installed() { [[ -d "${USER_HOME}/.oh-my-zsh" ]]; }

install_oh_my_zsh() {
  # The installer refuses to run unattended over an existing install, so this is
  # only ever called when there is none.
  sudo -H -u "$USERNAME" sh -c \
    "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" "" --unattended >/dev/null 2>&1
  # Returns 0 whatever happens. This is an optional improvement, and a
  # function that ends on a failing command is fatal under `set -e` when it
  # is called as a plain command — which would abort the remaining sections
  # over something the run could simply report. The caller checks the outcome.
  return 0
}

# `chsh` is what actually changes the login shell. Asked separately from
# installing zsh, because having a shell available and being handed it at every
# login are different decisions.
set_login_shell() {
  local shell="$1"
  grep -qxF "$shell" /etc/shells || echo "$shell" >>/etc/shells
  chsh -s "$shell" "$USERNAME"
  # Returns 0 whatever happens. This is an optional improvement, and a
  # function that ends on a failing command is fatal under `set -e` when it
  # is called as a plain command — which would abort the remaining sections
  # over something the run could simply report. The caller checks the outcome.
  return 0
}

# -----------------------------------------------------------------------------
# Neovim
# -----------------------------------------------------------------------------
#
# From the upstream tarball rather than the distribution, which ships Neovim
# years behind — Ubuntu 24.04 has 0.9 where upstream is on 0.12, and LazyVim
# requires 0.9+ with most plugins wanting newer.
#
# The asset names are x86_64 and arm64. The original mapped aarch64 to
# "aarch64", which is not a name Neovim publishes: on an arm machine it
# downloaded a 404 and tar failed on the HTML error page.
nvim_asset() {
  case "$ARCH" in
    amd64) echo x86_64 ;;
    arm64) echo arm64 ;;
  esac
}

nvim_installed_version() { nvim --version 2>/dev/null | awk 'NR == 1 { print $2 }'; }

nvim_latest_version() {
  curl -fsSL https://api.github.com/repos/neovim/neovim/releases/latest 2>/dev/null |
    jq -r '.tag_name // empty'
}

# Downloaded to /tmp, not to whatever directory the script was launched from —
# the original used `curl -LO`, which drops the tarball beside the script and
# leaves it there if tar fails.
#
# The old install is removed only after the download has succeeded, so a failed
# fetch leaves the working copy alone.
nvim_install() {
  local asset tarball dest
  asset="$(nvim_asset)"
  tarball="/tmp/nvim-linux-${asset}.tar.gz"
  dest="/opt/nvim-linux-${asset}"

  curl -fsSL -o "$tarball" \
    "https://github.com/neovim/neovim/releases/latest/download/nvim-linux-${asset}.tar.gz" || return 1

  # A 404 comes back as an HTML page, and tar's failure on it is unhelpful.
  # Checking here names the real problem.
  tar -tzf "$tarball" >/dev/null 2>&1 || {
    rm -f "$tarball"
    warn "the download is not a tarball — the release asset may have been renamed"
    return 1
  }

  rm -rf "$dest"
  tar -C /opt -xzf "$tarball"
  rm -f "$tarball"
  ln -sf "${dest}/bin/nvim" /usr/local/bin/nvim
}

# Clone a Neovim config into the account's ~/.config/nvim.
#
# From `cd /` for the same reason git config does: the script's working directory
# is usually under the invoking user's home at 0750, which the target account
# cannot stat, and git fails there before it does anything useful.
nvim_clone_config() {
  local repo="$1" dest="${USER_HOME}/.config/nvim"

  install -d -m 0755 -o "$USERNAME" -g "$(user_group)" "${USER_HOME}/.config"
  (cd / && sudo -H -u "$USERNAME" git clone --depth 1 "$repo" "$dest" >/dev/null 2>&1) || return 1

  # The starter is a template, not something to track. Left in place for a
  # config of the user's own, which they will want to keep pulling.
  [[ "$repo" == *LazyVim/starter* ]] && sudo -u "$USERNAME" rm -rf "${dest}/.git"
  return 0
}

# -----------------------------------------------------------------------------
# JavaScript runtimes
# -----------------------------------------------------------------------------
#
# Three of these are not optional, and it is worth being precise about why,
# because "we run on Bun" suggests Node could go and it cannot:
#
#   node   pm2 is a Node application (#!/usr/bin/env node), and pm2 supervises
#          every process here. officer-pty imports node-pty, a native addon with
#          no Linux prebuild — it compiles against the installed Node on every
#          machine. Either one alone makes Node load-bearing.
#   bun    the platform itself and nineteen of the twenty pm2 apps.
#   pm2    the process manager the ecosystem files are written for.
#
# Deno is not. Nothing in the platform imports it — checked across the whole
# tree — and it is offered only because it was in the original script and
# somebody may still want it.

# The current LTS major, asked of nodejs.org rather than hardcoded. The original
# pinned setup_22.x, which ages into "the version we happened to pick" the moment
# a new LTS lands.
node_lts_major() {
  curl -fsSL https://nodejs.org/dist/index.json 2>/dev/null |
    jq -r '[.[] | select(.lts != false)][0].version // empty' | sed 's/^v//; s/\..*//'
}

node_lts_label() {
  curl -fsSL https://nodejs.org/dist/index.json 2>/dev/null |
    jq -r '[.[] | select(.lts != false)][0] | "\(.version) (\(.lts))" // empty'
}

node_installed_major() { node -v 2>/dev/null | sed 's/^v//; s/\..*//'; }

install_node() {
  local major="$1"
  # NodeSource publishes one setup script per major. Checked before it is piped
  # into a shell, because a 404 page piped to bash is a confusing way to fail.
  curl -fsS -o /dev/null "https://deb.nodesource.com/setup_${major}.x" || {
    warn "NodeSource has no setup script for Node ${major}"
    return 1
  }
  curl -fsSL "https://deb.nodesource.com/setup_${major}.x" | bash - >/dev/null 2>&1
  pkg_install_now nodejs
  # Global installs land in /usr/local rather than in a path only root can write,
  # so `npm i -g` works the same for the owner and for root.
  npm config set prefix /usr/local >/dev/null 2>&1 || true
}

# Present anywhere: on PATH for this root shell, or in the account's own
# ~/.bun/bin, which is where the installer puts it and where root cannot see it.
bun_installed() { command -v bun &>/dev/null || [[ -x "${USER_HOME}/.bun/bin/bun" ]]; }

# Asked of whichever copy exists. Before the symlink is made, root's PATH has no
# bun at all, so `bun --version` reports nothing on a machine that plainly has it.
bun_version() {
  if command -v bun &>/dev/null; then
    bun --version
  elif [[ -x "${USER_HOME}/.bun/bin/bun" ]]; then
    "${USER_HOME}/.bun/bin/bun" --version
  fi
}

# The system-wide link, ensured on every run rather than only after an install.
#
# pm2 started at boot by systemd has no login shell, so ~/.bun/bin is not on its
# PATH — and every one of the twenty ecosystem apps that says `script: 'bun'`
# then fails to start on reboot while working perfectly when started by hand. A
# machine that already had bun before this script ran would never get the link if
# it were only made as part of installing.
#
# Safe across upgrades: a symlink resolves by path, and `bun upgrade` replaces
# the file at $BUN_INSTALL/bin/bun rather than moving it. The link only breaks if
# the home directory goes, which breaks bun anyway.
ensure_bun_symlink() {
  local bin="${USER_HOME}/.bun/bin/bun"
  [[ -x "$bin" ]] || return 1
  [[ "$(readlink -f /usr/local/bin/bun 2>/dev/null)" == "$(readlink -f "$bin")" ]] && return 1
  ln -sf "$bin" /usr/local/bin/bun
  return 0
}

# Installed as the account, then symlinked system-wide. pm2 started at boot by
# systemd has no login shell and therefore no ~/.bun/bin on PATH — without the
# symlink every bun-based sidecar fails to start on reboot and works fine when
# started by hand, which is a miserable thing to debug.
install_bun() {
  (cd / && sudo -H -u "$USERNAME" bash -c 'curl -fsSL https://bun.sh/install | bash') >/dev/null 2>&1
  [[ -x "${USER_HOME}/.bun/bin/bun" ]]
}

pm2_installed() { command -v pm2 &>/dev/null; }
install_pm2() { npm install -g pm2 >/dev/null 2>&1; }

deno_installed() { command -v deno &>/dev/null || [[ -x "${USER_HOME}/.deno/bin/deno" ]]; }
install_deno() {
  (cd / && sudo -H -u "$USERNAME" bash -c 'curl -fsSL https://deno.land/install.sh | sh') >/dev/null 2>&1
  [[ -x "${USER_HOME}/.deno/bin/deno" ]]
}

# -----------------------------------------------------------------------------
# Agent CLIs
# -----------------------------------------------------------------------------
#
# Claude Code goes in through Anthropic's own installer rather than npm, matching
# what the platform does for members (os-user-claude.ts) and chosen there for the
# auto-update the npm package does not do.
#
# Two things that installer insists on, both of which a naive port gets wrong:
#
#   It REFUSES to run under sudo from a regular user's shell — it checks for uid 0
#   with SUDO_USER set, because everything it installs goes under $HOME and under
#   sudo that is root's home. So it must run AS the account, not as root.
#
#   It declares #!/bin/bash and uses [[ … =~ … ]], so it must be piped to bash.
#   `| sh` fails on a dash-based /bin/sh, which is Ubuntu's.
#
# Both are recorded in os-user-claude.ts too, which found them first.

CLAUDE_INSTALL_URL="https://claude.ai/install.sh"
OPENCODE_INSTALL_URL="https://opencode.ai/install"

# Where each installer actually puts its binary. They disagree, and the platform
# depends on the difference:
#
#   claude    ~/.local/bin/claude       — claude-manager.ts tries Bun.which then
#                                         that exact path
#   opencode  ~/.opencode/bin/opencode  — sidecar/opencode/index.ts:22 hardcodes
#                                         join(homedir(), '.opencode', 'bin', …)
#
# Looking for opencode in ~/.local/bin, as an earlier version of this did,
# reports a perfectly good install as missing and then installs it again.
agent_bin() {
  case "$1" in
    claude) echo "${USER_HOME}/.local/bin/claude" ;;
    opencode) echo "${USER_HOME}/.opencode/bin/opencode" ;;
    *) echo "${USER_HOME}/.local/bin/$1" ;;
  esac
}

# The directories those live in, for the account's PATH.
agent_bin_dirs() { echo "${USER_HOME}/.local/bin" "${USER_HOME}/.opencode/bin"; }

agent_installed() { [[ -x "$(agent_bin "$1")" ]] || command -v "$1" &>/dev/null; }

# Which copy answers, so the run can say where it came from. Claude installed
# from npm sits in /usr/local/lib/node_modules and does NOT auto-update, which is
# the whole reason the platform prefers Anthropic's installer.
agent_path() {
  local name="$1" bin
  bin="$(agent_bin "$name")"
  [[ -x "$bin" ]] && {
    echo "$bin"
    return
  }
  command -v "$name" 2>/dev/null || true
}

agent_is_npm_install() { [[ "$(readlink -f "$(agent_path "$1")" 2>/dev/null)" == */node_modules/* ]]; }

agent_version() {
  local bin
  bin="$(agent_path "$1")"
  [[ -n "$bin" ]] && (cd / && sudo -H -u "$USERNAME" "$bin" --version 2>/dev/null | head -1)
}

install_claude_code() {
  (cd / && sudo -H -u "$USERNAME" bash -c "set -e; curl -fsSL ${CLAUDE_INSTALL_URL} | bash") >/dev/null 2>&1
  [[ -x "$(agent_bin claude)" ]]
}

install_opencode() {
  (cd / && sudo -H -u "$USERNAME" bash -c "set -e; curl -fsSL ${OPENCODE_INSTALL_URL} | bash") >/dev/null 2>&1
  [[ -x "$(agent_bin opencode)" ]]
}

install_pi() { npm install -g @mariozechner/pi-coding-agent >/dev/null 2>&1; }

# -----------------------------------------------------------------------------
# Default editor
# -----------------------------------------------------------------------------
#
# One preference, two mechanisms, and both are needed:
#
#   EDITOR / VISUAL      what the account's own shell hands to git, crontab -e,
#                        systemctl edit and anything else that opens an editor
#   update-alternatives  the system-wide `editor` command, which is what root and
#                        `sudoedit` use — an account's shell config cannot reach
#                        those
#
# This is the setting core.editor was deliberately left out in favour of: set it
# here and git follows, along with everything else.

editor_candidates() {
  local e
  for e in nvim vim nano; do command -v "$e" &>/dev/null && echo "$e"; done
}

# `|| true` for the same reason git_get has it: "not set" is an answer, and an
# assignment from a function that exits non-zero aborts the run under `set -e`.
current_editor() { (cd / && sudo -H -u "$USERNAME" bash -lc 'echo "${EDITOR:-}"' 2>/dev/null) || true; }

set_system_editor() {
  local editor="$1" path
  path="$(command -v "$editor")" || return 1
  # Only where the alternatives system is in use. Absent on non-Debian systems,
  # where there is nothing to set.
  command -v update-alternatives &>/dev/null || return 0
  update-alternatives --install /usr/bin/editor editor "$path" 100 >/dev/null 2>&1
  update-alternatives --set editor "$path" >/dev/null 2>&1
}