lazydocker, lazygit, starship and fastfetch were buried inside "System Update &
Essentials", after the package install and with no announcement — so a run
appeared to be installing system packages and then started pulling tarballs and
printing a five-shell starship tutorial. They are a different thing: upstream
binaries on their own release cadence, not anything the distribution ships. Now
their own step, announced in the same shape as the package section.
Each is checked before it is fetched. The original re-ran every installer on
every run, which is why a machine that already had starship got it reinstalled
along with its "add this to your ~/.zshrc" instructions — advice this script
does not want followed, since it writes the shell config itself. Its output is
now dropped; errors still surface.
Two real bugs fixed on the way:
lazygit's asset name was hardcoded to x86_64, so on arm64 the download 404s
and tar fails partway through the run. It now maps ARCH, and spells the
architectures the way lazygit does rather than the way we do.
The version was extracted with `tr -d 'v'`, which deletes every v in the
string rather than the leading one. `${version#v}` instead.
fastfetch stays a package but stops assuming the PPA is needed: Ubuntu picked
it up in 24.10, so the repository is now checked first and the PPA added only
where the archive has nothing. Verified on this host — noble genuinely has no
candidate, so the PPA is still the only source here.
Verified both branches of tools_install by stubbing the presence check.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A WIP boundary after section 2 so the finished part can be run start to finish
on its own, without the untouched sections below acting on the machine. It moves
down as each section is worked through and goes away when the walk ends.
Also ignores .setup-progress, which the script writes beside itself and is
per-machine. The exit message names it, because with it in place a second run
skips section 2 and the rewritten part cannot be re-felt from scratch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
lib/packages.sh, and section 2 wired to it.
The rule it exists to enforce: `apt-get install <present-package>` is not a
no-op, it upgrades the package if the repository has a newer one. On a machine
somebody already uses that silently moves a version they chose, and a setup
script is the last thing that should do that behind their back. pkg_install
queries the package database first and names only the genuinely absent packages
on the command line — a package already installed is never passed to apt at all.
It also says so out loud, every time, because a provisioning run should not be
opaque about what it is doing to the machine:
:: Core packages — installs what is missing, keeps what you already have
already here: curl ca-certificates gnupg git jq …
to install: btop tmux
Section 2's flat list of 19 is now pkgs_core(), split per package manager rather
than through a canonical-name table with overrides. The names genuinely disagree
(build-essential/base-devel, fd-find/fd) and three of them are not packages
elsewhere at all — apt-transport-https, lsb-release and software-properties-common
are apt concepts that exist to let later steps add the Docker repo and the
fastfetch PPA. A `case $PM` shows what each system actually gets, in one place.
Of those 19, six are load-bearing and the rest are the environment. Only
build-essential reaches beyond itself: it is a meta-package, so on a box with a
pinned gcc it pulls the distribution default alongside. Noted where it is
declared; it is the first thing to move out of core if that ever bites.
apt-get upgrade stays, but as its own announced step — it is the one place that
deliberately moves versions, rather than something that happens as a side effect
of asking for a tool.
DEBIAN_FRONTEND=noninteractive and NEEDRESTART_MODE=a now live inside the
helpers. needrestart has been on by default since Ubuntu 22.04 and stops to ask
which services to restart, which is how an unattended run ends up silently
waiting for a keypress.
dpkg-query on the status field rather than `dpkg -s`, which also succeeds for a
package removed but leaving its config behind — that state would read as present
and never be reinstalled.
Verified against this host's real dpkg database: all 19 report present, and a
mixed list correctly passes only the absent ones through.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
MACHINE_ROLE is homelab, vps or dev, and several steps have a different right
answer per role with no way to work it out themselves: whether the address is
yours to pin (static IP), whether the box faces the open internet (fail2ban, SSH
hardening, UFW), and whether it is allowed to sleep (suspend, logind).
Asked in pre-flight rather than at each point of use. The steps that care run
from swap through to the firewall, and being asked "is this a VPS?" for the
fourth time halfway down a provisioning run is how people start answering
without reading.
The default offered is guessed from whether this machine's own address is in
RFC1918 space, which beats asking whether it is virtualised — a homelab is very
often a VM on Proxmox and would be misread as rented — and is the same fact most
of the branches turn on anyway. A graphical session means dev; so does macOS.
It is only ever a suggestion the user confirms.
MACHINE_ROLE in the environment answers it ahead of time for an unattended run,
which is why it is declared with :- rather than a plain assignment. The first
version wiped the caller's value before ask_machine_role ever saw it; caught by
running with MACHINE_ROLE=vps and watching the menu appear anyway.
Verified: guesses vps on this host (public IPv4, no DISPLAY, no display
manager), env override takes, and a bad value fails with the three valid ones
named. Nothing consumes the role yet — the steps get wired as each is worked
through.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
scripts/setup/ is now what the new installer is being built in — machine-setup/
for the box, officer-setup.sh for the platform on top — and everything being
replaced moved to scripts/setup-old/. It still works and is still what to run.
Three things the move broke, and what each needed:
starship.toml is not an old-setup artifact. os-user-shell.ts reads it at
RUNTIME to seed a member's ~/.config/starship.toml when their Linux account is
provisioned, and line 125 reads it inside a try whose catch returns
"could not read the shell templates" — so account provisioning would have
failed outright, not degraded. Moved back to scripts/setup/, which is where it
belongs anyway (one file, both audiences) and which leaves the code correct
with no edit.
package.json's `setup` script pointed at a path that no longer exists. It now
points at officer-setup.sh, where the installer is going, rather than at
setup-old/ which is temporary.
officer-setup.sh was created empty. An empty script exits 0, so `bun setup`
would have reported success while doing nothing — worse than the broken path
it replaced. It now explains that it is not written yet and exits 1, naming
the setup-old script to run meanwhile.
Also brought .tmux.conf and ufw-docker-rules.conf in beside machine-setup.sh,
which reads both from SCRIPT_DIR and had been silently skipping them since the
script was vendored. ssh-keys.zip deliberately stays out: it is key material,
and *.zip is ignored.
Comments in os-user-claude.ts, app-store/preflight.ts and two docs still name the
old scripts/setup/setup.sh path. Left alone on purpose — repointing them at
setup-old/ only to repoint them again when officer-setup.sh lands is churn.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Structure before the work rather than during it: scripts/machine-setup.sh becomes
scripts/setup/machine-setup/, with the script itself as the entry point and
lib/base.sh holding what every part of it needs.
machine-setup.sh pre-flight and the numbered sections, for now
lib/base.sh shared state, output, the step/resume machine, prompts,
and OS detection
The rule for lib/ is definitions only — nothing there installs, writes or
restarts anything, so sourcing it is safe from anywhere. That is why the ERR
trap stayed in the entry point: a trap is a side effect on whoever sources it.
Behaviour is unchanged. Verified by diffing the moved region against the previous
commit: identical set of functions, and the only differences are added comments,
section banners, fail() reformatted onto three lines, and one new line — a guard
against double-sourcing, which matters because steps will source this directly
once they move out, and a second pass would reset SUMMARY.
The sections are still one 1111-line block below pre-flight; they move into
steps/ as each is worked through. The script also still reads ssh-keys.zip,
.tmux.conf and ufw-docker-rules.conf from SCRIPT_DIR, which is now this
directory, so those three steps warn and skip until the files follow it here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It was the only service here publishing on 0.0.0.0, and a published docker port
is not behind the firewall: docker writes its DNAT rules straight into the nat
table, which ufw's INPUT chain never sees. `ufw default deny incoming` never
covered 80/443/81 — ufw-docker-rules.conf on the host exists to patch exactly
that, and patching a rule is weaker than never opening the socket.
The address is read from `tailscale ip -4` at run time rather than passed in,
because the host provisioning has already done `tailscale up` by the time this
executes. It is validated against 100.64.0.0/10, the range tailscale and
headscale both allocate from. SETUP_NPM_BIND overrides it.
With neither, selecting NPM exits instead of falling back to 0.0.0.0 — a
fallback would silently undo the point of the change.
Two consequences worth knowing. tailscaled becomes a boot-order dependency, so
the script warns when it is not enabled at boot; docker's restart policy covers
the window but only if the tailnet comes up on its own. And HTTP-01 ACME
challenges can no longer reach port 80, so any certificate NPM issues now needs
DNS-01.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
8 Rust, 9 PulseAudio, 10 cliamp, 13 yt-dlp and 17 the remote desktop move to
scripts/setup/setup-sidecars.sh, which nothing invokes — running it is a
deliberate act. They are what the optional, sidecar-backed features need on the
host, not what the app needs to serve itself.
11 Neovim, 12 the shell extras and 14 the npm globals are gone entirely. The
host provisioning already installs node, npm, pm2, Claude Code, Neovim and the
shell, and two installers racing for the same binaries is worse than one. That
makes node, npm, pm2 and the agent CLIs prerequisites of this script rather
than products of it, so the verification block still checks claude and pm2 —
section 19 warns and skips rather than failing when pm2 is absent, which would
otherwise finish "successfully" with nothing listening.
eza is the one casualty: the provisioning installs lazygit, starship, oh-my-zsh
and nvim, but not that.
Section numbers keep their gaps so the two files read against each other. One
line survives from the removed section 14 — the ~/.local/bin PATH export, which
section 19's `has pm2` and the agent's claude lookup both still depend on.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two of the eight did not belong. cleanup-desktop.sh is the teardown — the inverse of an install, not part
of one. provision-user-dirs.ts runs per account at invite time, on a machine that is already set up.
Both are back at the top level, with their `../` derivations and usage strings put back.
What is left is what a fresh machine runs once: the two installers (setup.sh, setup_mac_light.sh), the
two things setup.sh calls (setup-dockers.sh, setup-desktop.sh), and the two files they deploy —
starship.toml, copied to ~/.config, and officer-set-display.sh, which setup-desktop.sh installs to
~/.local/bin as a login-time mode setter. The last one is not a setup script and does not read like one;
it is here because it is install payload, same as the toml, and setup-desktop.sh loads it by
`$(dirname $0)`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
scripts/ was holding two unrelated kinds of thing: install-this-machine, and run-this-occasionally. The
eight installers now live in scripts/setup/; what stays at the top level is the build steps (gen-index,
prebuild, build/) and the two maintenance scripts (reindex-music, rebuild-soulseek-tree).
The move is not just a rename. Three of these derive the repo root from their own location:
setup.sh:51 PROJECT_DIR="$(dirname "$SCRIPT_DIR")"
setup_mac_light.sh:51 same
cleanup-desktop.sh:134 ENV_FILE="$(dirname "$0")/../.env"
Left alone, all three would now resolve to scripts/ — and nothing downstream complains. PROJECT_DIR is
where .env is written, where `bun install`, `gen:index` and `db:push` run, and what pm2 is pointed at, so
a fresh install would have quietly provisioned scripts/ and reported success. cleanup-desktop.sh fails
the other way: it would find no .env, print "No .env — skipping", and leave the real VNC_PASSWORD in the
real file. All three are now `../..` with a comment saying why the level matters.
provision-user-dirs.ts imports data-path.ts relatively; that one tsgo caught.
Also disambiguated `setup.sh` where it had become two files. app-store/templates/<name>/setup.sh is a
per-sidecar installer with its own contract, and preflight.ts + docs/sidecar-app-store.md discussed both
in the same paragraph. The host one is now spelled with its full path at those sites.
Verified: bash -n on all six shell scripts, tsgo clean, os-user tests pass, both derivations resolve to
the repo root, starship.toml still resolves from os-user-shell.ts, and provision-user-dirs.ts runs under
DRY_RUN.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
pastilhasandClaude Opus 5