Three chip states now, and the third is a different question rather than a broken version of the second:
filled the account you are
plain an account you can become — click switches
dashed outline an account you can only look at — click shows its last known usage
"Has my other allowance come back yet" is answerable from a snapshot, and the machinery for it was already
right: a reset time is an absolute instant, and currentLimit rolls a past window forward and zeroes it
instead of showing a stale percentage. Phase one was hiding a correct answer.
What you cannot do is act on it without a /login, so the chip says that before it is clicked (in its title
and in its border) and the panel says it again while you are reading one. Naming the fix rather than the
problem: "No saved sign-in — run /login to use this one".
Viewing is deliberately NOT a general tab selection. Only an account with no credential can be viewed,
because for any other one the useful gesture is switching to it and then reading live numbers — which keeps
phase one's invariant intact: if the panel shows a signed-in account, it is THE signed-in account. Switching
clears the view for the same reason, so the numbers and the chips can never disagree.
Replaces the count line, which was a fact about somewhere else. The staleness line that was already in this
file — "Not signed in · as of 20 minutes ago" — now finally has a case that reaches it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two chips both read `andre.padez`. They are andre.padez@gmail.com and andre.padez@pertento.ai — one
person's personal and work accounts, which is the entire case this switcher exists for.
The chip showed the local part on the reasoning that the domain is what accounts have in common. That is
true of accounts belonging to different people and exactly backwards here: the local part is the half they
share and the domain is the half that tells them apart. So the strip wraps instead of scrolling, and the
address is not truncated.
The "N other accounts not shown" line was also lying. It counted stored usage READINGS minus the one being
displayed, which since the switcher landed includes accounts whose chip is two lines below — it said "2
other accounts not shown" with both of them on screen. It now counts only accounts with a reading and no
saved credential: an old login you can look at and cannot return to, which is the thing actually worth
saying. On this machine that is one, jrg.conceicao@gmail.com.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The owner keeps a personal account and a company one and moves between them during a day — by what the work
is, and sometimes because one has hit a limit and the work has to carry on. /login handles ARRIVING at an
account. It could not go back to one, because the credential it overwrote was gone.
ai_provider_usage already answered "which of my accounts has room". This answers what immediately follows:
"then use that one". The chips under the numbers stop selecting whose stats you read and start selecting who
you ARE — which turned out to be the useful half of the same gesture, since reading the other account's
percentages was only ever a prelude to using it.
anthropic_accounts holds each login's OAuth object encrypted, keyed (user_id, account_uuid).
One key per ACCOUNT, not one for the table: encryptSecret('anthropic-account:<uuid>', …), so the secret
store mints a separate key each and one leak is one account. Same reasoning that split VAULT_STORE_KEY into
purposes. The uuid comes from Anthropic and survives a re-login; the email is stable too but is editable at
the provider.
What is stored includes a REFRESH token, deliberately — the access token lives hours and the refresh token
is what makes a switch work a week later. So a row plus its key is thirty days of acting as that account.
That was accepted knowingly; the per-account key narrows it, and refreshExpiresAt is a column so a dead
credential gets purged on read rather than sitting here for ever. An expired one cannot be switched to at
all: reveal returns null, because writing an expired credential would sign the owner out with no message.
Capture happens on login AND on every read of the account list. Without that second one this would know
only about logins that went through this dialog, and an account signed into from a terminal would be
invisible to the switcher — half your accounts missing, silently. The switch also captures the OUTGOING
credential first, or switching away from a terminal login loses it.
.credentials.json is replaced wholesale; .claude.json is PATCHED. The second holds the CLI's entire config
and overwriting it would take out every project entry and preference in it.
Owner only, and the isolation is unchanged: getOwnerHomeDir ignores the email it is passed, so every path
here is the owner's. A member's claude reads their own home and none of this touches it. The earlier claim
in this work that the credential was "machine-wide" was wrong — the owner corrected it. What a switch
actually changes is every claude running AS THE OWNER: terminals, task runners, pipelines, the commander.
The spinner is not decoration. A switch rewrites a file and changes nothing visible, so without it the
honest reading of a click is "nothing happened" and the second click is somebody checking. A running turn
keeps the credential it was spawned with, and the response says so rather than leaving the UI to imply
otherwise.
Verified before shipping: capture records the live account with org, plan and expiry; reveal decrypts
byte-identical to what is on disk; /api/claude-auth/accounts is 401 unauthenticated and 403 for a non-owner.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Refresh on /files/...?view=x.m4a came back with the query string intact and no
viewer, and then double-clicking the file did nothing at all. Two symptoms, one
cause, and the second is what made it read as a click bug.
WorkspaceView gave the pane defaultSize={0} and opened it from an effect calling
panel.resize(), so open/closed was expressed twice — the markup said closed and
the effect was meant to correct it. A correction step can be missed, and this one
was: on a deep link isEphemeralOpen is true on the first render, but
workspace.isLoaded is false until /dashboards answers and the early return means
nothing is rendered, so the effect ran against a null ref and returned. Its deps
were [isEphemeralOpen, defaultBaseSize] — one already true, the other a constant
— so it never ran again. URL open, pane at zero width.
Then the inert double-click follows for free: ?view= already held that name, so
setSearchParams changed nothing, so there was no transition for the effect to
react to. The URL being already correct is exactly why the click had nothing to
say.
Now the pane is rendered conditionally with id + order — the same pair
WorkspaceRenderer already uses — and both panels take declarative sizes. There is
no moment where markup and intent disagree, and a deep link is right on first
paint rather than corrected after it. The try/catch that guarded resizing an
unlaid-out group goes with it; nothing calls resize now.
ephemeral-pane.test.tsx asserts the SIZE the group computes, not that the element
exists — a pane at zero width satisfies any is-it-in-the-document check, which is
the failure being guarded against. Five of its six tests fail against the old
implementation, including the load-order one. Full suite: 1316 pass.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Opening the link opens it in THIS browser — already signed into whichever account you are trying to move
away from. Copying it is how you authorise as somebody else: another browser profile, another browser, or
your phone. This dialog exists for a machine with two Anthropic accounts on it, so that is the common case
rather than the awkward one.
Uses helpers/clipboard, which falls back to execCommand when navigator.clipboard is absent, and reports a
failure rather than showing "Copied" over an empty clipboard.
Corrected a claim in that helper's own comment while touching it: it said Officer is reached over the
tailnet on plain http, as though that were the whole story. The owner browses over https and did when it
was written. The http origins are the other ways in, and an install with no certificate has no other way
in at all — which is why the fallback stays.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Phase one of answering a question the panel could not answer: whose numbers am I looking at.
This machine's owner has two Anthropic accounts, personal and work, and both had stored snapshots — so
both appeared as tabs. After signing in there was no way to tell from a glance which one was now being
spent. The panel was answering "here is usage for two accounts" while the question was "which am I on".
So the hook filters to the account marked `current`, and the absence of one now MEANS something: no current
row renders as "Not signed in" rather than as whichever tab happened to be selected first.
The email also gets its own line instead of sharing one with the plan. Joined as `Team · a@b.c` in a 320px
popover, the email is the half that truncates — and it is the half being read.
The other accounts are said out loud rather than silently dropped: "1 other account not shown". Knowing one
exists and is hidden deliberately is a different thing from wondering where it went.
Temporary and a one-line revert by construction: delete `onlyCurrent` in useClaudeUsage and return `all`.
The server still serves every account, the tab strip is still in the file, and nothing was deleted — the
stored snapshots are a real feature, they were simply drowning the question being asked.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer authenticates claude with a Claude SUBSCRIPTION over OAuth, and that is a browser round trip: open
a URL, authorise, paste a code back. It was the one part of running an agent a browser-only user could not
do from the browser — the answer was "open a terminal panel and drive the CLI by hand", which works, and is
a strange thing to ask of somebody whose entire session is a web page.
It needs no pty. `claude auth login` behaves identically through plain pipes, verified by capturing its raw
bytes, so this is an ordinary subprocess with two reads and one write: spawn, read until the URL, wait for
the person, write the code to stdin.
The parsing is the only non-obvious part. The CLI wraps the URL in an OSC-8 hyperlink escape AND prints it
again as visible text, so `https://\S+` returns two URLs concatenated with no separator between them.
Stripping the escape wrappers first leaves exactly one. Written against captured bytes rather than against
what the terminal appeared to show.
Three decisions worth keeping:
NOT under /auth. totality.ts exempts that prefix from the permission gate entirely, and correctly — it is
where a caller goes to BECOME authenticated. Mounted there, an unauthenticated POST could have started a
login as the owner. Verified after moving it: unauthenticated POST /api/claude-auth is 401.
On the `chat` grant rather than its own. The pairing is exact: an account that may use the agent must be
able to authenticate the agent, and an account that may not has nothing to authenticate. `confined` then
carries the rest for free — authorize.ts drops a confined grant for an account with no osUser, which is
precisely the account that cannot hold credentials of its own.
Nothing Anthropic-shaped is inherited by the child. For the owner those variables point at the local proxy,
whose whole job is swapping a shared secret for the owner's bearer token — handing them to a login is how
you get a success that authenticates nothing. A member's login runs through setpriv --reset-env as their own
Linux user, into their own home, because their turns bill their own subscription and that only holds if the
credential is theirs.
Pending logins are in memory on purpose: one is worthless once the process holding its PKCE verifier dies,
so persisting it would store a row that can only ever be stale. Ten-minute reaper, one per account, and the
dialog abandons its own on close so a dismissed dialog does not leave claude parked on a read of stdin.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"Exit and hand back to the agent, then re-arm" is the only fire behaviour a commander wants, and it is the
dialog's own default inside one. It was missing from the dialog in Command HQ.
The previous fix wired the consumer: isCommander={manager.context === 'command-hq'}, with a comment about
how the prop had never been passed by anybody. The producer was still not feeding it. EmbeddableChat builds
its manager from its OWN props — useEmbeddableChat(params) — and `context` there is a different value from
the `context` handed to useChat. Command HQ set the hook's and not the component's, so manager.context was
undefined, and the radio stayed hidden in the one place it exists for.
Two hooks named alike sitting on either side of that boundary is what hid it twice: hooks/useChat.ts and
EmbeddableChat/useEmbeddableChat.ts, one taking a `context` option, the other a `context` prop, neither
reading the other's.
Found by the owner trying to arm a deploy commander and finding only "stop when it fires", a one-shot,
where a watcher that re-arms was the whole point.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Clicking one in the Live list navigated to /command-hq — out of the screen, into a different route with a
different layout, having lost your place in the list you were scanning.
I argued for that in the commit before this one: /chat renders the transcript without the category, cost,
watcher state or the disarm control. It loses to a simpler argument. A commander IS a chat — same harness,
same transcript, resumable by the same route — and being thrown out of the page you are reading costs more
than metadata you did not ask for. Command HQ is where you go to MANAGE a commander, which is a separate
errand from reading what it just said.
Verified rather than assumed, because a commander's cwd is not one of /chat's directory groups: the
default-group load misses, and GET /chat/sessions/:id falls through to the by-id scan, which returns all
six messages and the real cwd with it. So the detail panel resumes it with no cwd hint at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A commander is a chat by every mechanism it uses, so it turned up in Live beside the conversations
somebody is actually having. With one deploy commander that is untidy. With a watcher armed per repo it
is a list where the thing you are looking for is outnumbered.
Two tabs inside Live, counts always shown. That last part differs from the badge on the Live tab above it,
which hides at zero because a standing `0` there says nothing. These two say a lot at zero:
`Commanders (0)` is how you find out the watcher is not running, which is usually why you looked.
The flag is derived server-side from the cwd, not from a `command_hq_sessions` lookup — every commander
shares one directory, so the directory IS the answer, it costs no query, and it is already right during a
commander's first turn, before any row exists.
It has to be in the payload rather than computed in the panel, and that is the point of the change: the
iPhone app swipes between LIVE chats and has no room for tabs. Filtering there needs the server to name
them. A deploy commander appearing in that swipe order is precisely what must not happen.
A commander row also now opens Command HQ instead of /chat. Same transcript either way, but /chat renders
it with nothing that makes it a commander legible — no category, no cost, no watcher state, and no way to
disarm it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The pane still showed "Send a message to start" over a bar reading 1 turn · $0.28. The id fix was
necessary and was not the cause.
useChat seeds its message list with useState(initialMessages ?? []) — read on the first render and never
again. ExistingCommander fetched the transcript AND called useChat in one component body, so the hook's
first render happened with resume still undefined and seeded itself empty. The messages landed a moment
later and the hook had no reason to look. The early `Loading…` return does not help: hooks run above it.
ChatPanelWrapper has always avoided this, and the line that does it is easy to read as a loading
nicety — `if (selectedSessionId && resuming) return null` sits ABOVE the component that owns the hook, so
the hook's first render is its only render, and it has real data. Split the same way here: a fetcher, and
a chat mounted once there is a transcript to mount it with.
Verified server-side while looking for this: loadClaudeSessionById returns the six messages for
172cdd8c, ending on the commander's answer. The data was always there and always reachable. Only the
pane could not see it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The messages were on screen, streaming, correct. Then the turn ended and the pane went empty under a
metadata bar still reading 1 turn · $0.66.
Nothing was lost — the pane discarded it. Once the transcript id was known, NewCommander navigated onto
it, and CommandHqDetail answered that URL with a DIFFERENT component: ExistingCommander, keyed on the id.
So React unmounted the live chat, closed its socket, and re-read the transcript from the API — a file the
harness had only just finished writing. What survived was whatever that fetch returned, which was nothing.
A permalink is for a refresh, not an instruction to reload. /chat has always understood that: useChat
replaces the URL and remounts nothing. This pane replaced the URL and remounted everything.
So the pane now keeps the session it started. CommandHqDetail remembers which id came from its own
composer and keeps that component mounted while the URL names it, swapping to the resuming component only
for a commander opened from the list. Clearing the memory on a real navigation means coming back later
still resumes from the transcript rather than remounting an empty live chat.
Worse than the empty pane, and the reason this is not cosmetic: the teardown fired at session:claude for
any chat where the harness names its transcript early — the START of a turn. A commander's turns run for
tens of minutes. The pane would have dropped the stream and shown a reader nothing at all while a deploy
rolled across seven servers.
claudeSessionId is now also set at session:claude, not only at result, matching the ref beside it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The first deploy commander ran, cost $0.66, and reported exactly the right thing — and the pane showed
an empty state, because the page was fetching an id nothing knows.
Two ids for one commander. `session:init` sets `sessionId` to OFFICER's key and arrives first;
`session:claude` carries Claude's transcript id and arrives later. `fileAsCommander` files the row
under the transcript id, and `command_hq_sessions` is keyed on it. But NewCommander navigated on
`chat.sessionId` — the first one it could see — and then set `filed`, which blocked the correction when
the real id turned up. So the URL held officer's key, /api/chat/sessions/<that> 404'd twice, and the
transcript was unreachable from the UI while sitting perfectly readable on disk.
The transcript id was only ever in a REF, deliberately — the reconnect handshake reads it synchronously
— so writing it re-rendered nothing and no caller could react to it. It is now state as well, returned
alongside sessionId, with the ref kept for the handshake that needs it.
setCategory had the same fault and would have silently updated no row: it was keyed on officer's key
against a table keyed on the transcript id.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
BackgroundJobDialog offers three fire behaviours and gates the third, `handoff` — exit, act, re-arm — on
an `isCommander` prop. Nothing ever passed it. So it defaulted to false everywhere and the option
appeared NOWHERE, including inside a Command HQ commander, where the dialog's own code makes it the
default.
Everything else was there: the fire rule, `handoffContract`, `armWatcher` reaching the server, and a note
recording that it had run for hours self-re-arming without failure. Only the radio button was missing,
which made a working mechanism look unbuilt — and it is the one a deploy watcher needs, since
`keep-going` never hands back to an agent at all.
Found while telling the owner how to start the deploy commander: the dialog in a commander showed two
options where I had said there would be three.
The fix is two lines and no new concept. `useEmbeddableChat` already receives `context` and passed it
into `useChat`; it now also returns it, and InputArea gives the dialog `isCommander={context ===
'command-hq'}`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Second half of the AskUserQuestion report: "when I answer, the agent does not react — I see the bubble
for a long time and end up sending a message anyway", intermittently and not reproducible.
Two different causes, both invisible from the outside.
A DROPPED answer was silent at every step. user-instance discarded the boolean, sendFire does nothing
when no sidecar is connected, and the lookup returns undefined for both "no such session" and "not
yours". So a lost answer and a slow agent looked identical: a card that does not change. It now warns
with the reason, and where a session exists it emits an error into the durable log — the same channel a
successful answer uses, so a second pane sees it too, rather than confirming to the browser that
clicked.
A LANDED answer had the opposite problem. The card goes read-only the moment you pick, but `sent` is
local and optimistic while `message.output` only arrives once the harness has produced something. In
between there is a real gap, and nothing filled it — so an answered card looked exactly like one that
had timed out. It now says "Answer sent — waiting for the agent", which makes the two states different
without pretending to know when the agent will speak.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The eleven ported themes declared 34 of an 84-token contract. The missing fifty were every surface
(--panel-bg, --card-bg, --glass-bg), every state colour (--success, --warning, --busy, --info), the
header, the scrollbars and the grid — so they fell back to whatever the base stylesheet or the
previously applied theme had left behind. They also carried thirteen tokens nothing in this codebase
reads (--chart-1..5, --sidebar-*), which is the tell: they came from a shadcn template, not from the
contract in the README beside them.
So "highlights mask the content" and "text fades into the background" were not taste. They were
absence, and no amount of re-picking colours would have fixed them.
Generated now, from Omarchy 4's colors.toml, which is genuinely semantic — three background depths,
four foreground weights, accent, selection, muted, mode — and consistent: all 24 keys present in all 22
themes, checked. One mapping in scripts/themes/map.ts means one place to be wrong, one place to fix,
and an Omarchy update becomes a re-run.
Every foreground is driven through ensureContrast against the surface it actually sits on, and the
generator then re-checks sixteen pairs per theme and EXITS NONZERO on a failure. It found four real
bugs in my own mapping, which is the argument for having written it first:
- `on(fill)` picked the better of two palette extremes without checking either passed; rose-pine's
tones are all mid and came out between 2.2:1 and 4.2:1
- ensureContrast chose black or white by a luminance>0.5 test rather than by measuring. rose-pine's
rose sits at 0.25, so it drove toward white and capped at 3.5:1 where black reaches 6:1 easily
- --muted-foreground was derived against the raised surface but renders on the high one; everforest
landed at 4.44:1 and miasma at 4.00 — near-misses that look fine in a screenshot
- borders were held to 3:1, which would ring every panel in a hard line. A panel edge is decoration;
what must be discernible is a form field's boundary, so --input is checked and --border is not
35 failures at first run, 0 now.
The registry and the stylesheet imports are written from the same list, because the old port maintained
them by hand and drifted — catppuccin-mocha sat in THEMES after its stylesheet was gone. That file is
now deleted; Omarchy renamed it to catppuccin.
Eleven new themes arrive with this: ethereal, flexoki-light, hackerman, last-horizon, lumon, lupine,
miasma, retro-82, solitude, vantablack, white. Duck and Plain are Officer's own and are never generated.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Desktop is a plugin as of today, and this is the half that leaves. sidecar/vnc/, api/desktop/ and
apps/Desktop/ are gone from src/, along with the vocabulary that was the real problem.
sidecar/protocol.ts had a VNC section: vnc:start, vnc:ensure-password, vnc:stop, four reply variants
and two types. sidecar-registry.ts had startVnc, ensureVncPassword, stopVnc, isVncConnected. Four
functions and a dozen message types in the platform, describing a feature that is not the platform's —
the rule CLAUDE.md states most plainly, and its clearest breach.
What replaced them is generic. sendSidecarCommand(kind, cmd) and isSidecarConnected(kind) know that a
command has a type and an id and that a reply carries the same id. A plugin's sidecar speaks whatever
it likes through them and nothing here has to be edited when it adds a message.
The desktop PERMISSION leaves too, and that is the interesting part: it was kind: 'execution', a kind
a plugin permission cannot have and never will, because a permission nobody can delegate is a
contradiction. The plugin expresses the same refusal as ownerOnly: ['/'] — every path under it denied
to anyone but the owner. Verified: /api/desktop, /api/desktop/vnc-password and a path that does not
exist all resolve owner-only. registry.test.ts records the round trip rather than just dropping the
key from its list.
Also gone: the app store's `vnc` entry, which would have offered an older second way to install the
same thing against a process PM2 no longer has, and four commented-out mounts left from 2026-08-13.
The disconnect-scope test used startVnc as its stand-in for "another sidecar's long-running request".
It now uses the generic door, which is the better instrument — that file is about the blast radius of
a disconnect and never had anything to do with VNC.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A disabled plugin keeps its directory, and the directory is what the next start runs. The longer it
stays off the more certainly it is stale, and enabling would quietly run whatever was current on the
day it was switched off — with every step reporting success, which is exactly how the jellyfin
install on alpha re-applied a two-day-old checkout.
Deleting no longer has that problem, since it takes the directory with it and installing is always a
fresh clone. That left disable/enable as the one remaining way to run old code without being told.
The pull is best-effort and the enable is not. `updatePlugin` returns ok:false when a pull is
refused, and it is refused for reasons that say nothing about whether the plugin can run: a dirty
working tree — every plugin directory on this machine is one — an unreachable forge, or a directory
copied in rather than cloned. Enable is the reversible half of a pair with disable, and a switch that
will not turn back on because a network is down is worse than one running last week's code. So the
refresh reports which of those happened and the enable proceeds regardless; a re-apply that fails
falls back to the code already on disk, which was running before it was disabled.
Tested by the refusal path rather than the happy one: a directory that is not a checkout comes back
having reported "not refreshed", and the error that surfaces is about not being installed rather than
about git — which is only possible if the refusal was stepped past instead of returned.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three states all read as "stopped": disabled, uninstalled, and uninstalled-with-the-directory-still-
there. Nothing on screen distinguished them, and the one that mattered was invisible — an uninstalled
plugin kept its directory, which silently decided what the next install would run. That is how a
jellyfin install on alpha re-applied a checkout from two days earlier while reporting success at
every step.
So uninstall stops being a verb. What it did survives as the first half of deleting: it stops the
sidecar, removes the install row and the PM2 entry, unpublishes the copies, and revokes grants naming
permissions that are about to stop existing.
Delete is offered only on a plugin that is not running — disable is one reversible click, so a live
plugin is always two deliberate steps from gone. It opens a confirmation carrying a checkbox, "also
delete all its data", unticked and never inherited from last time. Unticked, the directory goes and
the rows stay, and they appear in the orphan list further down the same screen. Ticked, the tables go
with it, which is the only way to a machine that has never had the plugin.
The checkbox picks between two ROUTES, not a body flag on one: a flag can be added to a request by
anything that already knows how to call the safe verb, and the difference here is somebody's rows.
Grants are revoked either way, which is load-bearing until the permissions work tomorrow: a grant
naming a key the platform no longer recognises made the whole permissions screen unsaveable, because
the page submits every grant it loaded.
Also corrected two rationales that the change made false — the runbook's "uninstall never destroys
data" verification table, and npm-deps.ts explaining directory survival in terms of uninstall.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Uninstalling a plugin left it under a heading that said "Installed", with a caption saying "not
installed". It never moved, so a successful uninstall read as a failed one — and nothing on screen
said the directory was still sitting there deciding what a reinstall would run.
That mattered more than the wording. Install skips the clone when the directory exists (install.ts
findPlugin, fetch.ts refusing an existing dir) and never pulls, so reinstalling jellyfin on alpha
silently re-applied a checkout from two days earlier. The provisioning code was not on the machine,
jellyfin_accounts was never created, and connecting a server did nothing at all — with no error
anywhere, because every step it did run succeeded.
Two changes, both UI:
- The heading is "On this machine", which is what the list is: every plugin DIRECTORY, installed or
not. Delete is what moves a plugin back to the marketplace, and now the screen shows why.
- Delete is gated on being uninstalled and is a button rather than a small underlined link. It was
previously offered in every state, so two clicks separated a running plugin from its tables being
dropped. Uninstall, then delete — the order the buttons now teach.
Still true and not addressed here: uninstall followed by install reuses the existing directory as it
stands. The detail pane says so now; making install fast-forward a clean checkout is a separate call.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
same stable-bump shape as useFilesRefresh. Generate and Gallery are independent sibling panels with
no props between them (per the panel contract, components only ever receive panelId), so a finished
job reaching the gallery needs a signal rather than the standalone app's onFinished callback prop.
three defects, one shape: the code has two names for "which session is this",
and every guard checked the one no caller uses.
`fable` is the FIRST entry in the claude-code catalogue, so it is what
ModelSelector picks whenever it decides a conversation needs a default. On a
key without fable entitlement that lands as a 429, after a real mid-session
switch — the reported header read OPUSPLAN → FABLE.
1. the settings default was applied to RESUMED chats. the guard was
`!initialSessionId`, and no chat caller passes that when resuming — the id
arrives as `options.resumeSessionId`, and ChatPanelWrapper goes as far as
`resume ? undefined : sessionKey`. so a user's default model was written
over sessions that already had one. both names are checked now.
2. `hasStarted` was `!!preloadedMessages?.length`, which is FALSE for the
first frames of a resumed chat — before its messages arrive. ModelSelector
reads "not started" as permission to pick a default, so a reload reassigned
live sessions during that window. a session id is known on the first render
and a chat that has one is by definition not new.
3. harness lock. `crossesHarness` returned false when the current harness was
unknown, which reads as "nothing crosses" and is the opposite of what is
known — with no current harness, everything might. so a started session
offered a switch to opencode while its model was still resolving, a switch
that cannot work: it hands a `ses_…` id to `claude --resume` and dispatches
to the wrong sidecar. unknown is not permission; the strip locks until the
answer arrives.
the settings themselves were never wrong — chat.defaultModel reads
claude-code/opus on the affected server. nothing was ever reading it for the
sessions that got reassigned.
Fifteen sites across thirteen files where a raw green stood in for a
semantic state: connection dots, health lights, completed-job ticks, the
copied-to-clipboard check, the installed badge, the checksum-matched line.
All of them meant "on / connected / succeeded", and matched each other only
because several people happened to pick the same palette number.
The values do move: --success is #16a34a where green-500 was #22c55e and
emerald-500 #10b981. That is the point — one token, so a theme can change
its mind once, and under plain.css (the leak-detection theme, which greys
--success to #404040) these now go colourless instead of staying green.
Left alone, deliberately: the confetti palette and the Start button in
start-confetti-button, the duck-avatar debug HUD, MetricCard's up/down
delta ramp, CommandBlock's check on its hardcoded dark block, the
react-email template, and the plain.css comment that names the anti-pattern.
Reds are untouched — that is a separate pass, so some ternaries now read
bg-success : bg-red-500 until it happens.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
the connection dot was `bg-green-500` and the bell followed it there to match.
both are `success` now — #16a34a where the palette value was #22c55e.
the raw palette value was the wrong thing for either to hold. tone.ts already
says why: once a view can reach for any of tailwind's twenty-two palettes,
green stops reading as "open" and starts reading as "the author liked green
here". two elements in one header meaning the same thing should say so by
sharing a token, not by two people picking the same number.
Replaces the old mark everywhere it is referenced — the header reads it through
--logo-src and every theme points at the same file, and the auth landing page and
the emailer read it directly, so one asset covers all three.
The CSS skew goes with it. That is where the old logo's slant came from, and
applying it to this one shears letterforms that were kerned pair by pair by hand
and signed off as finished. See landing/assets/brand/WORDMARK.md for the
construction.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
the bell sat on the right between the connection dot and the end-session plug,
which put a SETTING in among the STATUS. everything on the right reports what
the chat is doing now; the bell says what it will do later. it moves to the
left of the header, on its own.
and it is coloured by preference, so the setting is readable without opening
the menu: green for every end of turn, amber for input-needed, muted for none.
green is `green-500` rather than the `text-success` token deliberately — it
has to be the SAME green as the connection dot a few elements away, and a
semantic token that drifted from it would leave two greens in one header
meaning two different things. amber is `text-warning` (#f59e0b), which is the
conditional setting: it will speak, but only sometimes.
`none` keeps the struck-through bell as well as the muted colour. colour alone
is not a state anyone should have to learn, and it is the one setting where
being wrong is silent.
they were sticky at the top, which put them over the first line — and on a
one-line block, which is most of them in a chat, over the whole thing.
absolute bottom-right inside the surface now, with `.code-surface` given the
`position: relative` it never had. that omission is why a control could end up
escaping to the nearest positioned ancestor and floating below the block it
belongs to.
`padding-bottom` on the pre to go with the existing `padding-right`: the last
line is the one they overlap now, and it needs its own room the same way the
first line needed it before.
the trade the old comment was worried about is real but smaller than it reads:
a block taller than the viewport now has its controls at the bottom rather
than the top. that is where you end up after reading it anyway, and it is a
worse place to be only for a block you never scroll — which is exactly the
block whose first line the old position was covering.
Client half of the per-chat notification preference — DetailBar gets a bell
dropdown (every end of turn / only when input is needed / none), a global
useChatNotifications hook holds one connection to /api/chat/notify/ws for
the whole session so a background chat can still ring the bell and fire a
browser Notification, and the session list shows a badge on any row set to
notify. The server side (schema, the notify-delivery socket, the sidecar
signal at turn-end/plan-gate/question-gate) landed already in 5cba1b65,
swept in from a concurrent session sharing this working tree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
officer is a single-page app, so a same-tab navigation to an external url
unloads it — tap a link in a message and you come back to a cold boot with the
scroll position and anything mid-flight gone.
`a` was simply absent from MD_COMPONENTS, so every link rendered as a bare
anchor. all four ReactMarkdown call sites in MessageBubble share that object,
so one override covers assistant messages, user messages, tool output and the
collapsed blocks.
noopener noreferrer with it: a bare target="_blank" hands the opened page a
live window.opener back into the app. target is set AFTER the prop spread so
raw html in a message cannot override it with _self.
The harness answered every question itself, instantly, with "The user did not
answer the questions." — before the card had painted, let alone been read. The
agent then reasoned about a refusal that never happened: on 2026-08-19 it asked
the same question three times in a row while the answers sat on the screen.
The web UI already worked around it by rendering the card ungated and sending
the click back as an ordinary chat message. That got an answer through, but the
agent read it as a new instruction arriving from nowhere rather than as the
reply to what it asked, and nothing could distinguish a live question from one
answered last week — every replayed transcript rendered its old questions as
clickable.
A PreToolUse hook is the fix, and it has to be a hook rather than canUseTool:
under bypassPermissions — which is every session here — the SDK shadows the
callback and never calls it. Measured against 0.2.59: a bypassing session's
AskUserQuestion reached the hook and never reached canUseTool. Hooks run
regardless of permission mode.
The hook parks on a promise keyed by the harness's own tool_use_id, and returns
`deny` with the human's answer as the reason — which the harness feeds back as
the tool result verbatim. "Deny" reads wrong and is right: what it denies is the
tool's ability to answer for the user, and what replaces its output is what the
user actually said. Held open for 150s in testing with the turn completing
normally, so a person has time to think.
Keying on tool_use_id rather than an invented id means no new durable event: the
questions are already in the session log as an ordinary tool:start, and the
answer arrives as its tool:result. One source of truth, replay included — which
is what re-enables gating the card on `output`, and with it the staleness fix.
The two tests that pinned the old ungated behaviour asserted the workaround as
the contract; they now pin the reversal, including a pre-fix transcript reading
as settled, which it is.
Unanswered questions settle like plans do: 20 minutes, every session-ending path
draining them first, and wording that tells the agent the question is still on
the user's screen and must not be asked again.
Mobile (Butler) has the same workaround and is not fixed here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The chip could not be cleared by any means, and the toast could not be silenced
from the call site: useClient raises a GLOBAL onError before it throws, so
handling the failure where Stop is pressed was always going to be too late.
DELETE is idempotent. Asking for a job to stop when it is already gone has
achieved what was asked, so "no such task" and "already stopped" now answer 200
with `gone: true` instead of 400. No error, no toast, and the client clears the
chip on the flag.
A genuine refusal — a malformed id, a subagent with no fd to trace — is still
400.
The previous client-side check stays as a fallback, for a browser talking to a
server that has not been updated yet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A chip stuck on "running" could not be stopped, killed or dismissed. Stop and
Kill both answered {"stopped":false,"reason":"no such task"} — there is no
output file, so no pid, so nothing to signal — and dismiss is only offered for a
task the tray believes has finished. A chip with no way out.
The server saying it cannot find the job is authoritative rather than an error
worth reporting: the chip was the last thing claiming it existed. Pressing Stop
now clears it.
Running chips still have no dismiss button of their own, deliberately — the
tray is the only thing watching a live job and a hidden one is a job you have no
way back to. This is the escape hatch for a job that is not actually live, and
it is reached by pressing the control you would already have pressed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Your own messages were plain `whitespace-pre-wrap`, so pasting a fenced block
gave you back the backticks and none of the formatting — the one place in the
app where markdown was written and never read.
The usual reason to leave user text alone is that rendering changes what was
typed: `a_b_c` becomes italic, a leading `#` becomes a heading. That is real,
and the answer is the Copy button beside it, which copies the RAW text. The
original is one click away and nothing you wrote can be lost to a renderer.
Same remark plugins, components and sanitize schema as the assistant's,
deliberately — a code block should look identical whoever wrote it, and the
schema already strips script, iframe, object, embed and form, so pasted HTML is
inert either way.
The copy button appears on hover rather than always, unlike the assistant's: a
reply is something you copy out of, while your own message is something you
already have, so the control earns its place only when reached for.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A background job that ignores SIGTERM could not be stopped from the UI at all.
Stop sends SIGTERM to every pid holding the job's output file, and the second
click sent the same signal again — task-restart.ts already said "that is what
the second click is for", and it was not. Reported after a job hung in another
chat.
The button now escalates instead of a second button appearing beside it. Press
Stop, and if the job is still running three seconds later the same control
becomes Kill in the destructive tone, and sends SIGKILL.
Escalating rather than always offering Kill, because a permanent Kill button is
a second destructive control competing with the first, and people reach for it
by default — losing the graceful shutdown that usually works. The delay is the
same argument: a clean exit takes well under a second, so offering Kill at once
teaches everyone to press it first.
`?force=1` on the existing DELETE rather than a second route: same verb on the
same thing, differing only in how hard it asks. The member path escalates too —
one `kill -KILL` run as them, since fuser and the kill must both be their own
identity.
Stated in the button's own title rather than hidden: SIGKILL gives the process
no chance to release a port or take its children with it. That is the right
trade for a hang and the reason it is not offered first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
24 panel and screen files had their fields sitting in a <div> instead of a
<form> — typing a value and pressing Enter did nothing, and the button was
the only way in. Fixed the sites that are a real form, a single field with
an obvious action, or a multi-field editor; left search/filter boxes and a
few genuinely ambiguous sites alone (see TODO.md for the full breakdown).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Eleventh extraction, and the only one that deleted its UI instead of moving it.
Seventeen files under apps/Gitea/ reimplemented a fraction of an interface
Gitea already has; the plugin renders the real one in an iframe over a
same-origin proxy.
Deleting rather than moving removed a platform change nobody now has to build:
useGiteaLocation read :owner/:name/:tab/:item from five route patterns where a
plugin gets two, so an as-is extraction would have required teaching the plugin
system to declare extra route patterns. Nothing inside an iframe needs a route.
Nothing working was lost. The router had been commented out of hono.ts since
2026-08-13 with api: [], and officer-gitea was running nowhere — the screen
rendered and every request 404'd, like soulseek, jellyfin and invoices before
it.
Gitea also stops being a CORE DOCK ITEM. It was hardcoded in CORE_DOCK_ITEMS,
the only installable feature that was, on the reasoning that it fronts a remote
instance and installs nothing locally. As a plugin its tile arrives from
assets/icon.png like every other — which is also why the icon added to
public/icons/ this morning was reverted rather than kept.
'gitea' stays in the ServiceName union: the connection lives in core
service_connections, and gitea is the reason that table has its "member rows
carry only a token and inherit the owner's URL" shape at all.
registry.test.ts's grantable-permission test named gitea as "the case this was
built for"; a plugin's permissions are registered at install and are never in
that compile-time list, so it now names a core one. catalogue.test.ts
re-anchored to vnc/notify.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
capabilities/ is the file-based item store, and most of it belongs to the
owner: the six item directories are created by the platform at boot and
extensions/tool-loader is written from platform source, so neither is tracked
anywhere. What IS tracked is the small set the platform ships — today one
affordance, telling an agent that markdown images render and that the USER'S
DEVICE fetches the URL, which it cannot discover from the filesystem.
That now lives in officerdev/capabilities, public so a fresh install can clone
it without credentials.
Two ways in. The setup script syncs it during the layout step — non-fatal, and
it says what an install without it costs rather than failing: agents go back to
guessing, which is what they did before this existed. And "Update all" on the
marketplace screen carries it alongside the plugins, because it is the same
question — get me what has been published since I installed — and a second
different gesture for it is one nobody remembers.
Three states in both places, and the third is the normal one on an existing
machine: a checkout is pulled, an empty directory is cloned into, and a
directory that already holds the platform's generated items gets a repository
initialised around them. UNTRACKED files never block a pull, because the
owner's own skills and tools living here is the ordinary state — only tracked
changes do.
`cloned` and `adopted` are reported in the UI where `pulled` is not: they mean
this machine had no affordances at all until the button was pressed.
Verified against the real checkout: sync reports pulled, and the loader finds
officer/core/image-rendering afterwards.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
There was no update path. fetchPlugin REFUSES an existing directory — cloning
over one is how uncommitted work disappears — so install was a one-way door,
and the answer to "my plugin changed" was uninstall and reinstall, which drops
its tables on the way past.
An update is a git pull and then the ORDINARY install path. installPlugin
already skips the clone when the directory is present and re-runs everything
else: os dependencies, schema push, assets, the ecosystem entry, the sidecar,
the remount and the frontend rebuild. So there is no second implementation of
"apply a plugin" here to drift from the first.
Two refusals, both about not destroying work. A dirty working tree is refused
rather than stashed or force-pulled — every plugin directory on a developer's
machine is a live checkout, and this repository's own are edited in place.
Non-fast-forward is refused for the same reason: a diverged local commit is
somebody's work and merging it automatically is not the platform's decision.
The per-plugin button replaces one that was quietly broken: it appeared only
when `outdated` and called `install`, which cannot fetch, so it re-applied
stale code. Nothing bumps a version today either, so with everything pinned at
1.0.0 that flag never fires and the button never appeared. Now always offered,
and it pulls.
Update-all is a plain POST rather than the streaming door: twelve interleaved
step streams is not a readable log, and the useful answer is the summary. It
runs sequentially — each update pushes schema, republishes assets, rewrites the
ecosystem file and rebuilds the frontend, and two of those at once is a race
over one file each. One failure does not stop the rest, and failures are named
with their reason, because "2 failed" sends someone to the terminal.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tenth extraction, and the first where the blocker was a permission rather than
a path. The wallet was kind: 'admin' — owner only, never grantable — and plugin
permissions are always kind: 'app'. mount.ts forces that and the manifest has
no field for anything else, deliberately, so a plugin cannot ask to be
restricted. Extraction therefore could not preserve admin.
Raised before moving any code, because turning "the server owner's bitcoin"
into a row in the grants list beside Photos and Music is the kind of change
nobody notices until someone ticks it.
Made anyway, and the objection inverts: every wallet query is scoped by
user_id, taken from X-Officer-User which the platform injects from the session,
so granting the permission gives an account its OWN wallet rather than access
to anyone else's — including to the owner, whose bypass covers permission
checks and not query scoping. kind: 'admin' was single-user thinking.
Named bitcoin-wallet, not wallet: appName drives route, API prefix, table
prefix and install key together, so the name should say what it is. Tables are
bitcoin_wallet_*; the prefix guard normalises the hyphen. Verified free before
committing to it — no wallet table exists on any server, and db:push would
treat a rename as a drop plus a create.
registry.test.ts re-anchored: `wallet` was its canonical kind: 'admin' fixture
and its no-selfService fixture. Now user-admin/server-admin and terminal, with
a note that a plugin's permissions are always `app` — which is exactly why this
one needed a decision rather than a default.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ninth extraction, third resurrection. Switched off since 2026-08-13 with the
permission reduced to api: [], so assertPermissionTotality was satisfied, the
server booted clean, and every panel request 404'd. Closes the same data hazard
as jellyfin and soulseek: invoiceshelf/schema was commented out of the drizzle
barrel.
Named `invoices`, not `invoiceshelf`. The appName is THE id — API prefix,
frontend route, table prefix, sidecar suffix, install key — and before
extraction the API (/api/invoiceshelf) and the screen (/invoices) had drifted
apart, which was harmless only while they were separate hardcoded strings. The
route is the part a person sees, and the permission key and label were already
`invoices`, so the API prefix was the odd one out. Cost three call sites and a
table rename to invoices_accounts, which was free only because the table
existed on no server — verified before deciding, not after.
members.test.ts re-anchored again, this time to caldav and memos: services with
no extraction planned. That assertion has now been re-pointed four times by
services leaving for plugins/, which is the whole reason installer.test.ts was
made literal earlier tonight.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Eighth extraction, second resurrection. Same shape as soulseek: hono.ts had the
router import and its PROTECTED_MOUNTS entry commented out since 2026-08-13 and
the permission reduced to api: [], so assertPermissionTotality was satisfied,
the server booted clean, and every panel request 404'd. Also closes the same
data hazard — jellyfin_servers was absent from the drizzle barrel, so bun
db:push would have dropped it.
No frontend call site needed repointing: mountPrefix derives /jellyfin from the
appName, which is what the router already hardcoded.
Test fixtures fixed properly rather than re-anchored again. Extracting jellyfin
broke 18 tests, the FOURTH extraction in a row to break the same files — photos
and transmission yesterday, slskd an hour ago, jellyfin now. installer.test.ts
now builds literal CatalogueEntry fixtures and asks the catalogue nothing: it
pins planSteps and runInstall, which are installer logic, and a service leaving
for plugins/ says nothing about whether the installer still plans the right
steps. catalogue.test.ts stays the place real entries are checked well-formed.
members/catalogue/preflight re-anchored to memos, which has jellyfin's exact
shape.
The .prettierignore rule for the vendored hls.mjs moved into the plugin rather
than being left behind naming a deleted path.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Seventh extraction, and the first of something that was already dead. Soulseek
had been switched off since 2026-08-13: hono.ts carried the router import and
its PROTECTED_MOUNTS entry commented out, so createSidecarProxy never ran and
registerProxiedPrefix was never called; officer-slskd was not in the ecosystem
at all. Because the permission entry had been reduced to api: [], the totality
check was satisfied and the server booted clean — the UI rendered and every
request 404'd. Worth naming: the boot check proves every MOUNTED prefix has a
permission, and is silent about a feature that mounts nothing.
Also closes a live data hazard: schema.ts had the soulseek export commented
out, so the three tables were absent from the drizzle barrel and bun db:push
would have dropped soulseek_favorites, soulseek_browse_snapshots and
soulseek_browse_dirs on any server holding them. rebuild-soulseek-tree.ts
documented the workaround rather than the problem; deleted with the rest.
The connection stays in core service_connections under service 'slskd' while
the mount is now /api/soulseek. Those differ on purpose.
Test fixtures: slskd was canonical in three app-store tests, the third
extraction running to break them. installer.test.ts now builds a literal
fixture instead of reaching into the catalogue — it pins planSteps, which is
installer logic, and no catalogue entry is both provisioned and members:'none'
any more. catalogue.test.ts and members.test.ts re-anchored to vnc/notify/gitea.
Unrelated but mine: check:theme caught 5 palette classes I introduced in
CommandHQ earlier tonight against a baseline of 0. Converted to bg-success /
bg-warning. check:theme is not part of bun test, which is why the green suite
never showed it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
AskUserQuestion has no answer channel: it resolves itself the moment it is
called, returning "The user did not answer the questions." before the buttons
have painted. QuestionActivity gated its options on `message.output === undefined`,
so that self-resolve disabled every option on every question, always. Reported
from real use — muted text, no-entry cursor, nothing clickable.
The output means the tool call is over, which is true and irrelevant. The answer
travels back as an ordinary chat message. `sent` is the only real latch.
The test was the worse half: it asserted the greyed-out state was correct, using
the literal self-resolve string as its fixture. Code and test were wrong in the
same direction, so a green suite sat on top of a feature that had never once
worked. Inverted it, and verified it fails against the old logic rather than
just passing against the new.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Sixth extraction, straight after photos. Everything transmission now lives at
gitea.officer.dev/plugins/transmission.
Deleted, not commented: the sidecar, the api router, the Transmission app (28
files including detail/ and dialogs/), the screen, the App.tsx route pair, the
Dashboard barrel line, the usePageTitle rule, the AppRegistry wiring, the
officerdev barrel re-exports, the permission registry entry, the hono.ts import
and mount comments, and the app-store catalogue entry.
No database change: transmission owns no tables. Its connection lives in
service_connections, a core table it now depends on from outside — a real
coupling, recorded in the plugin's own PLUGIN.md rather than left to be
discovered.
── Test fixtures, repointed rather than deleted ──
Transmission was the canonical `members: 'none'` fixture — a single-tenant
daemon with no user concept — across three app-store test files. slskd has the
identical shape, so the assertions moved there. Deleting them would have
quietly dropped coverage of the no-members install path along with the plugin,
which is the same trap the vault extraction hit with `members: 'invite'`.
── Vocabulary swept, per the runbook ──
Six screens and two App.tsx comments pointed at `/photos` or `/transmission` as
the worked example of the Workspace/Panel shape. Both are plugins now, so those
pointers dangled at code no longer in the tree. Repointed at /command-hq and
/soulseek, which are core.
bunx tsgo clean. 1080 pass / 0 fail.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Fifth extraction, and the clean case: no reverse dependency, configuration
already server-side, frontend already panels. Everything photos now lives at
gitea.officer.dev/plugins/photos.
Deleted, not commented: the sidecar, the api router, the db directory, the
Photos app (25 files), the screen, the App.tsx route pair, the Dashboard
barrel line, the usePageTitle rule, the AppRegistry wiring, the officerdev
barrel re-exports, the permission registry entry, both database barrels, the
hono.ts import comment, and the app-store catalogue entry.
The catalogue deletion is required rather than tidying — the trap the runbook
records as having bitten twice. permissionAvailability() derives from
sidecar_installs, which a plugin never gets a row in, so a leftover entry makes
the permission permanently 'unavailable' and withholds the route and dock tile
on a server where the plugin is installed and working.
── Test fixtures, repointed rather than deleted ──
Photos was the canonical app-store fixture across four test files, chosen for
being existing|provisioned with members: 'accounts'. Jellyfin has the identical
shape, so the assertions moved there — they are about the installer, not about
photos, and deleting them would have quietly dropped coverage of the provisioned
install path along with the plugin.
One loss worth naming: Immich's `provisioned` install mode went with the
catalogue entry. Docker provisioning for plugins does not exist yet, so photos
is point-at-your-own-instance until it does.
bunx tsgo clean. 1080 pass / 0 fail, unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The model has been asking questions in Officer all along. None of them ever
rendered.
MessageBubble dispatched the interactive question UI on
`toolName === 'question'` — OpenCode's name for it. Claude Code's tool is
`AskUserQuestion`, so every question from a Claude session fell through to the
generic ToolActivity and printed its input as JSON in a bubble. Nothing threw,
nothing logged, and the payload was arriving correctly the whole time, so it
read as "the model never asks" rather than as a bug. Both harnesses send the
same shape under different names; only the name was ever wrong.
── What this deliberately does NOT do ──
It does not make the agent wait. Checked against the installed SDK rather than
assumed: AskUserQuestion is implemented inside the bundled cli.js (with its own
"No answer provided" fallback), appears nowhere in sdk.d.ts, and there is no
control method or hook that can return a tool RESULT. canUseTool and PreToolUse
can only allow or deny, and canUseTool is shadowed entirely under
bypassPermissions, which is how Officer runs. So the tool self-resolves as
unanswered the moment it is called, whatever the client does.
The two ways to pretend otherwise — forging a tool result, or smuggling the
choice through a denial reason — both lie to the model about what happened.
Neither is here. The question is rendered, and the answer goes back as the next
message, exactly what a person would have typed. The tool contract is untouched.
The cost is real and stated in the file: the agent will usually have carried on
and reads the answer a beat late. The day the SDK grows an answer channel, this
component is the piece that already knows how to ask.
── Also fixed while in there ──
State was single-valued and shared across questions, but the schema allows up to
four. With more than one, the first click sent a partial answer and locked the
rest. Now keyed by question index: nothing is sent until every question has an
answer, and a multi-question reply is labelled by header so it cannot be
ambiguous. Multi-select joins with commas, which is what the tool's own output
schema documents.
`multiSelect` (Claude Code) and `multiple` (OpenCode) are normalised in one
place rather than at each read site.
6 tests pinning both harness shapes, the multi-question rule, the client-side
"Other" escape hatch (both schemas tell the model not to offer one, because
providing it is the client's job), and that an already-resolved question is
read-only.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
DELETE /command-hq/commanders/:sessionId — deletes the transcript itself via
deleteClaudeSession (the same function DELETE /chat/sessions/:id calls, so a
/clear chain goes with it, every part), then the command_hq_sessions row via
deleteCommandHqSession (existing, exported, never previously called from a
route — its docstring said as much: "no product path to this yet").
Deliberately real deletion, not an unfile-back-to-/chat path — there still
isn't one of those, and this doesn't create one. Documented next to "The
/chat <-> /command-hq relationship" so it doesn't read as contradicting the
"a session never moves the other direction" rule directly above it.
Frontend: both the grid card and the detail bar's meta row get an inline
confirm (trash icon -> check/cancel), same shape as ChatHistory's own
SessionRow delete. The grid card's delete control is a sibling of the card's
<Link>, not nested inside it, per docs/navigation-audit.md — the card is a
stretched full-cover Link (absolute inset-0, default stacking) with the
delete control in its own stacking context (z-10) on top of it, so the card
stays click-anywhere except where the trash icon sits. Deleting the commander
currently open in the detail panel navigates back to the bare list rather
than leaving it pointed at a 404.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Traced "(no output yet)" on a live commander to the actual running process on
this machine rather than guessing: the tray's log-tail was working correctly
(it's a general /chat feature, nothing to fix there) — the task's .output
file was genuinely empty because the agent had written
`timeout 8 ping -c 1 -W 5 google.com >/dev/null 2>&1`, throwing away ping's
own output and only echoing on a failed ping. Correct for "let me know if it
goes down," but it means a healthy watcher shows nothing at all, indistin-
guishable at a glance from a stuck one.
buildBackgroundJobPrompt gains an unconditional rule — every job shape, not
only watchers — telling the agent not to redirect a command's own output to
/dev/null or similar: whatever it would print in a terminal is what the owner
wants to see live in the job's log. Landed at rule 8 for watchers (after the
existing fire rule), 5 for a bare command, 4 for a bare prompt — whichever
number falls after the rules already in that branch, so rule 7's existing
identity (referenced by number in tests, docs and COMMS) is untouched.
Also lightly reworded rule 7's "stay silent" line: it was already only about
the agent's own narration, not the underlying command's output, but the
distinction wasn't explicit and reads exactly like the instinct that produced
the >/dev/null in the first place.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both the grid card and the detail meta bar now read "N turns · 12.3k tok ·
$0.20" — tokens first, since that's what was actually asked to be primary,
dollars kept alongside rather than dropped. formatTokens abbreviates past
1000 (12.3k, 1.2M) the same way a long-running watcher's cost already reads
at a glance; the raw sum stops being readable well before the dollar figure
does.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Builds the Workspace/Panel screen the design doc's "Layout, v1" described but
nothing had implemented yet: /command-hq and /command-hq/:sessionId, three
always-mounted panels (officerdev/src/apps/CommandHQ/) — a flat category nav
filtering the grid via ?category=, a commander grid reading GET /commanders,
and a detail pane that is either an empty state, the new-commander composer, or
the selected commander's resumed transcript.
Follows the frontend route conventions in CLAUDE.md throughout: Workspace/Panel
framework (locked, three fixed panels, no standalone screen), category and
session both addressable in the URL rather than a channel, real <Link>s for
every row and card, a route pair (/command-hq + /command-hq/:sessionId) the
same shape as /chat's.
The composer reuses the exact mechanism /chat already uses to create a
commander — an ordinary turn with context: 'command-hq' via useChat/
EmbeddableChat — rather than the mobile-only POST /commanders/new HTTP route.
Once the harness reports a real transcript id the URL is replaced onto it
(useChat's own permalink writes /chat/<id>, which is the wrong screen here, so
that's done by hand). fileAsCommander always files a new commander
uncategorised — it has no way to know a category was selected in the composer
— so if one was, a client-side PATCH sets it after the fact, the same race
POST /commanders/new already resolves server-side for mobile, just resolved
here on the client instead.
The detail panel's transcript resume mirrors ChatPanelWrapper's fetch-then-
mount pattern (GET /chat/sessions/:id first, then useChat with
resumeSessionId + initialMessages + paginate) rather than reusing it directly
— Command HQ's version is simpler (no dashboard/agent-panel concerns) and
scopes rename/category/disarm through Command HQ's own PATCH route rather
than /chat's, since a commander lives in a different directory than an
ordinary chat session.
Card status is the three-state read COMMS/command-hq/mobile-4.md proposed and
the design record adopted: green running, amber armed-but-not-running (the
watcherArmed && !running pair that makes a silently-dead watcher visible),
grey neither.
Registered in AppRegistry.tsx, re-exported from officerdev's barrel (route
helpers + types, per CLAUDE.md's rule for anything an officer-web screen
needs), a CORE_DOCK_ITEMS tile (not in DEFAULT_DOCK_PATHS — opt-in via the
Dock settings screen, same as Jobs/Monitor/Activity), and a usePageTitle rule.
bunx tsgo clean, suite at its 7 pre-existing baseline failures, none of them
this feature's. NOT yet clicked through against a running server — the
composer's redirect-on-real-id, the disarm button, the category-race PATCH
have all typechecked and nothing more. That's the next real test.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
pastilhasandClaude Opus 5