sharp does the images now; ffmpeg keeps the video. each does the job it is for —
sharp is libvips in-process, no process to spawn and no pipe, which is an order of
magnitude less work for the common case of a folder of photographs. a video has no
frame until something decodes one, and that is ffmpeg's and nobody else's.
added through the procedure bunfig.toml describes, since there is no
--no-frozen-lockfile flag in bun 1.3.14: package.json edited, frozenLockfile
commented out for ONE command, lockfile diff read, setting put back, and a frozen
install confirmed clean afterwards.
WHAT THE LOCKFILE DIFF ACTUALLY SAID, because the friction is only worth anything
if somebody reads it. everything is inside sharp's tree: sharp 0.33.5 -> 0.35.4 at
top level, @img/colour added, and the per-platform libvips binaries moved 1.2.4 ->
1.3.3. two SHARED packages moved with it — semver 7.7.4 -> 7.8.5 and
@emnapi/runtime 1.8.1 -> 1.11.3 — both forced by sharp's own ranges, and both
previous consumers (next, editorconfig) kept pinned copies of what they had. next
keeps its own sharp at 0.33.5 entirely. nothing outside that moved.
^0.35.3 to match what av-club declares. 0.x caret pins the minor, so ^0.33 and
^0.35 do not overlap — the plugin intersection would have resolved two native
libvips trees onto one machine for no reason.
THE IMAGE LIST GREW: libvips reads HEIC and SVG and ffmpeg does not, and neither is
exotic — HEIC is what every recent iPhone writes, and a folder of them drawing
generic file icons was the most visible gap this had.
`failOn: 'none'` and `limitInputPixels: false` are both deliberate. libvips rejects
a file with any warning in it, and a truncated JPEG — an interrupted copy, a phone
that died mid-write — is exactly that; refusing it would make this browser stricter
than the viewer somebody opens the file with. the pixel ceiling is a DoS guard for
an upload endpoint, and these are the owner's own files already on the owner's own
disk: a panorama is not an attack.
SETUP, both halves:
ffmpeg was never in the package list at all, on any of the four package managers,
despite this router shelling out to it for subtitles, audio extraction and audio
tracks long before thumbnails existed. it worked because every machine set up by
hand already had it. now declared.
sharp gets a LOAD CHECK beside node-pty's build check, and reported separately from
it. same failure shape — an install that succeeds while the native module does not
— but the opposite cause: node-pty compiles and can fail to, sharp downloads a
libvips binary for this exact platform and arch and can fail to resolve one. a
combined "native modules" verdict would send somebody to rebuild the wrong thing.
loading it is the only test worth running; a directory proves nothing, and
`versions.vips` proves libvips is bound.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer-Session: 656f5c85-e49a-4f1f-b9f3-042a04b4d043
images and videos get a thumbnail in grid and list. one <Thumbnail>, two sizes —
two implementations would have drifted the first time one learned something the
other did not, and the fallback is the part that would have drifted.
FFMPEG FOR BOTH, and no new dependency. a video needs a frame extracted, which
only ffmpeg does; an image only needs resizing, which sharp does faster and with
better format coverage. sharp is nevertheless not used: it sits in node_modules as
somebody else's transitive dependency and is absent from package.json, so importing
it is an undeclared dependency — the thing the frozen lockfile exists to prevent —
and declaring it is a deliberate --no-frozen-lockfile that belongs to whoever owns
the dependency list. ffmpeg is already a hard requirement of this router, so this
adds nothing to what the machine must have. the cost is HEIC and a few exotics,
which fall back to the icon.
THE CACHE KEY CONTAINS MTIME AND SIZE. a path alone would be wrong: replace a photo
under the same name and every screen keeps the old picture with nothing to clear it
but somebody who knows the cache exists. keyed on content, a changed file is a
different key — the old entry is orphaned rather than stale, and the response can be
`immutable` honestly rather than as a bet.
FAILURES ARE REMEMBERED. the browser retries a broken <img> every time it re-enters
the viewport, so without this one corrupt video runs ffmpeg on every scroll, forever.
in memory, so a restart gives it another chance after somebody installs a codec.
`ls` DECIDES what can be thumbnailed, not the client. the browser's own
NATIVE_VIDEO_EXTS is deliberately only what a <video> tag can play, which is a
different question from what ffmpeg can take a frame out of — every .mkv would have
gone without a picture for that reason alone. the entry has just been stat'd, so the
answer is a lookup on its name.
FOUND WHILE TESTING, and the reason there is a test folder: ffmpeg EXITS 0 HAVING
WRITTEN A ZERO-BYTE FILE when the seek lands past the end of the input. a 0.4s clip
gave exit 0 and 0 bytes with `-ss 1`, and exit 0 and a real JPEG without it. the
retry keyed on the exit code and so never fired, reporting every short video as
having no thumbnail. it keys on the output file now — there is one question worth
asking an image encoder and it is whether there is an image.
four ffmpeg at a time. the grid is virtualised so only what is on screen is asked
for, but scrolling fast through a folder of video queues far more than is visible,
and unbounded decoding turned a 1.9GB box into a swap storm once already.
size is snapped to 64px steps so a panel resizing by a pixel cannot mint a hundred
entries of one image. verified: 240 and 256 share a cache entry, 200 gets its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer-Session: 656f5c85-e49a-4f1f-b9f3-042a04b4d043
the .part-then-rename rule was applied at two upload routes yesterday and
by this morning the platform had a dozen other writes putting files in the
same folders — an OCR result beside its image, a TTS clip, a download
landing, a save from the editor — every one straight to the final name. a
guarantee that holds for two of fourteen paths is not a guarantee, and the
next person adding a fifteenth had nothing to copy.
so it is a function now, and every durable write goes through it: the file
browser, sendoff, task definitions, skill and tool files, bug reports,
scraped attachments, the chat provider config.
the failure it prevents is silent rather than loud. a truncated m4a decodes
fine, it is simply short — a commander transcribing recordings as they land
would produce a clean transcript of the first few seconds of a two-minute
memo and report success.
two things learned writing it. Bun.write creates the parent chain itself,
so the mkdir option i added was dead weight and several callers were doing
it twice. and Parameters<typeof Bun.write>[1] resolves to the first
overload only — BunFile — which rejects the string and Buffer every caller
actually passes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer-Session: 656f5c85-e49a-4f1f-b9f3-042a04b4d043
Speech-to-text is now plugins/transcribe — sidecar, its own config, its own
skill and a task for the file browser's context menu. The transcription logic
moved BYTE FOR BYTE: 416 lines whose every decision has a reason attached, from
the two-pass detect-then-transcribe to the 25 language priming prompts to
timeout:false. Verified identical rather than assumed.
Removed here: api/stt/, server-settings/stt.ts and its mount, POST /chat/stt,
POST /file-browser/transcribe, the FileViewer handler behind the button hidden
last release, the Settings screen, the dead useAudioRecording hook and the
orphaned locale keys across all six locales.
blobToWav stayed. It lived in the same file as the dead hook and is still used
by DictateDialog — unrelated to STT, and deleting by file rather than by use is
how that would have gone.
No permission entry to remove: STT never had one, living under server-admin,
chat and files. The registry count is unchanged and docs:check is green.
The plugin ships a task that will not appear in the menu yet — the platform
loads a plugin's skills, affordances and notifications from its own directory
but not its tasks. That loader is the remaining piece of docs/plugin-capabilities.md
and is deliberately not built here.
1426 pass, tsgo clean, 18 plugins discovered with none broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer-Session: 656f5c85-e49a-4f1f-b9f3-042a04b4d043
Bun.write(filePath, file) streams to the name the file will end up with, so for
as long as an upload takes, that name exists holding a partial file and nothing
watching the folder can tell. The failure is silent rather than loud — a
truncated m4a decodes fine, it is just short — so a watcher transcribing voice
memos as they arrive would produce a clean transcript of the first few seconds
of a two-minute recording and report success.
Writing to <name>.part and renaming makes the final name either absent or
complete. Every consumer gets that for free: the phone's own uploadVerified, a
watcher, an agent reading the folder. The alternative was each of them inventing
"the size stopped changing", which cannot tell a finished upload from a stalled
one.
SendOff had the same shape and it matters more there, because that is a folder
things arrive in unattended — neither a recipient watching it nor the push
notification may name a file still being written.
.part rather than a dotfile, deliberately: a leftover should be VISIBLE, named
for what it was going to be, beside where it belongs. A failed write cleans up
after itself; only an interrupted process leaves a fragment, which is the case
worth being able to see. Nothing sweeps them — a job deleting files it did not
create is a worse trade than a fragment somebody can spot.
Server-side only. The phone uploads exactly as before and its verification read
happens after the response, by which time the rename has landed. No new build.
Verified: a watcher polling every millisecond through a 40 MB write never saw a
partial file under the final name, and a real 8 MB upload through the live route
left the file complete with no .part behind. 1422 pass.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer-Session: 656f5c85-e49a-4f1f-b9f3-042a04b4d043
Three things from testing.
── The download zip carried the path to itself ──
Selecting files in ~/Tests/test_folder and downloading produced an archive whose
contents were `Tests/test_folder/…`. `POST /download` spawned zip with
`cwd: rootDir` and root-relative paths, so the whole chain from home went in.
Nobody selecting three files is asking for the route to that folder to be part of
what they downloaded.
Now it zips from the items' own folder using bare names. A MIXED selection keeps
the old form, because two `notes.txt` from different folders would collide
without the paths keeping them apart — the UI only selects within one folder, so
that branch is a safety net rather than the case. `/compress` already did it this
way; this is the same fix on the endpoint that predates it.
Verified against real zip: `Tests/a.txt` → `a.txt`, `Tests/test_folder/b.txt` →
`test_folder/b.txt`.
── Double-clicking an archive extracts it ──
It opened a pane that rendered "Archive file" and the name you could already see
in the listing. That is a step on the way to the only thing anyone opens a zip
for. Extract resolves collisions, so a second double-click makes a sibling rather
than overwriting. The menu's Extract stays — a double-click is not a discoverable
way to learn what will happen.
── Show location ──
A search result answers "here is the file"; its path underneath raises "where does
this live", and clicking only ever answered the first. This goes to the containing
folder, clears the search and SELECTS the row, so a folder of forty files does not
leave you hunting. A directory hit reveals its parent — where is this means the
folder it sits in, not the folder it is.
tsgo clean, frontend builds, 817 pass / 7 fail unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The audit split the menu's omissions in two. Three were deliberate — OCR,
Transcribe and Extract Audio were removed in July because the task system does
them better, and those stay gone. The rest were nobody's decision. This is the
rest.
── One menu body instead of two ──
`DropdownMenuItems` and `ContextMenuItems` were character-identical apart from the
component prefix: 159 lines duplicated, including the same comment twice. Radix
gives both families the same props, so the components are now a parameter and
there is one list. That is why this diff removes more than it adds while adding
seven items — and why the next item only has to be written once.
── Added to the row menu ──
- Open — double-click was the only way. Every file manager puts it first.
- Open in editor — `/code-editor` is on the SAME `files` permission as `/files`,
so anyone who can browse could already edit; there was just no way to get there
from a file. Narrower than Read Aloud on purpose: that one uses the `text`
FALLBACK type, which matches .exe and .bin.
- Paste into folder — a move was only expressible as cut → navigate → paste.
Right-clicking the destination is the obvious gesture and did not exist.
- Duplicate — one call away the whole time; `/copy` already resolves collisions
to " (copy 2)".
- Compress — the missing half of Extract. `/download` shelled out to zip but
streamed the result away, so nothing could make an archive and keep it. New
`POST /file-browser/compress` writes it beside the original.
- Pin / Unpin — pinning existed only in the widget, which is not where you meet
a file worth keeping to hand.
── Added to the background menu ──
- Clone repository and Show/Hide hidden files. Both were toolbar-only, and the
toolbar hides them under `md:` — so on a phone neither existed. All four
desktop-only toolbar actions are now in this menu, which long-press reaches.
- Paste is gated on the clipboard, as both toolbars already were. Ungated it fell
through to the OS clipboard path and either toasted a secure-context error or
silently did nothing — an item that looked available and was not.
── Removed ──
`pcm-worklet-processor.js`, orphaned when cliamp left for the music plugin this
morning. Verified unreferenced; the plugin ships its own copy inline.
The `Play` hole itself is NOT closed and cannot be from here: there is no way for
a plugin to register a context-menu item. Tasks and agents are the only extension
mechanism and a task can only contribute a task entry. That is a platform gap and
wants its own decision.
Verified the zip invocation by hand for all three shapes — single file, directory
(recursive, contents included), and a multi-item selection. Archive naming strips
the extension only for a file, so a directory called `my.photos` stays
`my.photos.zip` rather than becoming `my.zip`.
tsgo clean, frontend builds, 808 pass / 7 fail unchanged.
SelectionActions.tsx and usePipelineRunner.ts are prettier reflowing long lines —
no semantic change, caught by formatting the folder.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things, from a member sitting on /music with no music capability on a server with
no music sidecar: an empty library, and 403s in the console.
PERMISSIONS AT THE ROUTE. `canVisit` filtered the dock and nothing else, so the tile was
hidden and the route was wide open — typing the path, following an old link or restoring
a tab rendered the screen anyway. RouteGate now wraps every screen in one place, inside
the error boundary.
It does not redirect. Sending someone to `/` erases what they asked for and reads as a
bug: they clicked Music and landed on Home. It says why instead, and the URL stays put so
a reload after installing the thing just works.
And it says which of the two reasons applies, because they need different screens and send
the reader to different places. `not-installed` is a fact about the SERVER — the owner gets
a link to the app store. `not-granted` is a fact about the ACCOUNT, and only the owner can
change it. Presenting either as the other sends you looking in the wrong place.
ROUTES FOLLOW THE SIDECAR. Free, once the above exists: `deniedRoutes` already covers
"held but its sidecar is not installed", so an uninstalled feature has no tile AND no
screen. The dock, the Permissions list and the routes now agree because they read one
answer.
NO MORE SEEDING. Downloads/Documents/Music/Videos/Pictures are gone from both places that
made them — the member's provisioning and, older and worse, `/ls`, which created folders in
somebody's home as a side effect of LOOKING at it. A listing that invents its own contents
is a listing you cannot trust, and the platform has no standing to choose a person's folder
layout. A new home is empty.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"This folder is empty" was a lie. The five seeded directories were sitting there and the
platform's readdir raised EACCES: a member's home is 700 and owned by them, which is
correct for a shell and locks out the file browser, which runs inside the platform
process. /ls caught the error and returned an empty listing, so a refusal looked exactly
like data.
Two doors, two boundaries, and that is the point rather than a compromise. The terminal
and the agent RUN AS the member and the kernel is the boundary there. The file browser
acts on the member's behalf from inside the platform, which already applies its own
containment and is the owner's process on the owner's machine — it can read anything via
sudo regardless. Giving it access describes who is doing the work.
Done with named POSIX ACLs, because it has to hold in BOTH directions: a file the
platform writes must be editable by the member and vice versa. Mode bits cannot say that
— whichever party is neither owner nor group lands in "other", and widening "other"
opens the home to every account on the box. A shared group fails the same way, since both
parties would have to be in it and that puts every member in a group that can read every
other member's home. Two named entries plus `d:` defaults grant exactly two users and are
inherited by whatever either side creates, whatever their umask.
Verified: platform lists the home, member edits a platform-written file, platform edits a
member-written file, and a SECOND member is refused on both ls and cat.
/ls now distinguishes EACCES from a missing directory. An empty result is data and must
never be how a refusal looks.
acl joins the core packages in setup.sh — the alternative is an account that provisions
and then cannot list its own home.
Also: the file browser's own useTasks/useAgents fired /tasks, /agents and both category
endpoints on every render, which is where the last four 403s came from — they are the
context menu's Run Task and agent submenus, execution-only. Gated.
And plans is deleted: router, screen, routes, dock tile, hook, page title and its
capability. It read markdown from <repo>/plans, which does not exist. Fresh-install
Permissions is now Files alone, with Terminal to come.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Introduces a fifth capability kind. `files` was `execution` — never grantable,
because it meant the OWNER'S filesystem. It is now `confined`: execution-shaped, but
the kernel enforces the boundary because the account has its own Linux user, its own
home, and no permission above it.
The rule that makes `confined` mean something lives in authorize.ts, once: a confined
grant is DROPPED for an account with no osUser. So "granted but unconfined" resolves
to no access rather than to the owner's home — which is what it would otherwise
resolve to, since getOwnerHomeDir ignores the email it is handed whenever HOME_DIR is
set. One rule covers the HTTP routes, the websocket doors and the dock, instead of
each router remembering.
resolveHomeDir(userId) is the new seam and it reads the row rather than the token, for
the same reason authorize.ts re-reads role: provisioning a Linux account for an
existing member has to take effect on the next request, not in thirty days.
The file browser resolves it in middleware and puts it on ctx user, because
getRootDir is called from fifteen places in that router. Making it async would have
meant editing fifteen call sites, and the cost of missing one is serving the owner's
home to a member. Now a handler cannot run without the answer.
Two things a real run caught:
- /ls seeds Downloads/Documents into the home as the service user, which is EPERM
against a 700 home owned by the member — it took the whole listing down. Seeding is
now best-effort there and happens at provision time instead, as the member.
- .unique() on os_user made db:push ask whether to TRUNCATE users, which is
unanswerable non-interactively. uniqueIndex instead, per databases/CLAUDE.md.
Verified: a member without a Linux account is refused by name; with one, resolves to
their own home and NOT to HOME_DIR; the owner still resolves to HOME_DIR; and every
.. escape is refused while an absolute path is rebased under the root.
Terminal is still execution — that is the next stage.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The permission model being built reads the HTTP method to decide whether a
non-owner may make a call: safe methods are reads, everything else is a write.
That only works if the method tells the truth. These five read something and
returned it while announcing themselves as writes, so a member would have been
denied a read they are entitled to because of a habit in how the route was
declared.
/api/file-browser/video-info POST {url} -> GET ?url=
/api/file-browser/video-playlist POST {url} -> GET ?url=
/api/server-settings/ocr/models POST {url} -> GET ?url=
/api/transmission/_officer/port-test POST -> GET
/api/jellyfin/_config/:id/test POST|GET -> GET only
The last one already answered to both, which is worse than either: a method that
means nothing cannot be the thing authorisation reads.
Deliberately stops at five. A sweep of all 100 mutating routes found many more
reads wearing POST, and they are staying, for two reasons that are not going
away: some need a request body GET cannot carry (/stt takes multipart audio;
/tts, /ocr, /transcribe take payloads), and some carry a credential, where a
query string is the wrong place — access logs, shell history and Referer headers
all capture those, request bodies do not (/tts/voices takes an apiKey, the four
/test endpoints take connection secrets, /local-providers/probe takes auth).
So the method alone can never carry the permission model, and the registry will
need an explicit per-route classification regardless. Converting these five is
worth it because it is free; converting the rest would be a breaking change
across 117 mobile call sites that buys nothing.
Web callers updated in the same commit; the sidecar contract comments now match.
Mobile has exactly one caller to change — transmissionPortTest in
packages/core/src/services/transmission.ts — and no shim was added, because an
endpoint answering to both methods is the problem this commit exists to fix.
docs/api-method-changes-2026-08-06.md is the handoff for the mobile team: what
changed, the one line to edit, what deliberately did NOT change and why, and how
to verify.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Turns the downloader into a server-side job on the existing jobs spine (Postgres
persistence, live WS viewers + replay, abort, /jobs UI) — but with its own
executor and its own lane, since it's deterministic scripting, not an agent, and
a multi-hour playlist mustn't block agentic jobs.
- reclip-client.ts (new, shared): reclipInfo / reclipPlaylist / reclipDownloadOne
(single download → streams the file to a dir, abort-aware). Extracted so both
the file-browser endpoints and the job executor use one client.
- execute-download.ts (new): the two-phase executor —
phase 1 metadata (expand playlist, fetch each info, keep survivors, skip
errors), phase 2 download (each survivor in the chosen format; skip download
errors). Emits a compact `download:progress` snapshot (counters, not per-item
events — playlists are thousands of items). Throws on abort / fatal.
- job manager: `download` mode dispatch → executeDownload; persists
download:progress; adds execution LANES (download vs default) so the two run
independently and each serializes on its own; promoteNext fills both lanes.
- POST /api/tasks/jobs/download { url, format, dir, root?, label? } — enqueues a
download job (own lane, no capability task needed; traversal-guarded target).
- schema: `download` added to the mode enum (drizzle text-enum — no DB migration);
getPendingJobs() query for lane filling.
Verified the executor with a mocked ReClip client: two-phase filtering, skip-on-
error counts, and abort-throws all correct.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworks the download-video dialog into a prefetch-then-download flow, mirroring
ReClip's own web UI. Still a pure proxy to ReClip (its yt-dlp); no downloader
logic moves to the platform.
Server (thin ReClip proxies alongside /download-video):
- POST /file-browser/video-info { url } → ReClip /api/info → { title, thumbnail, duration, uploader }
- POST /file-browser/video-playlist { url } → ReClip /api/playlist → { urls }
Both return { error } inline (200) so the client can render failures per-card.
UI (VideoDownloadDialog, now self-contained; useFileBrowserApp exposes `files`
and drops the old single-shot state/handler):
- Paste a URL → Fetch. A playlist URL (list=) expands via /video-playlist, then
each entry's /video-info is prefetched sequentially (ReClip does yt-dlp per
video), rendering a card (thumbnail, title, uploader, duration) that fills in
progressively.
- Per-entry Download, plus Download All when there's more than one; per-card
status (downloading → saving → saved / retry-on-error) via the existing
background job + poll.
- Playlists get an optional "subfolder you name" field (ReClip's /api/playlist
carries no playlist title); blank = current folder.
- Quality is always best (matches the mobile Share flow — no picker); the
audio-only toggle applies to the whole batch.
Verified ReClip's contract live: /api/info returns the metadata fields, and
/api/playlist returns { urls } (17 entries in ~1.2s).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Display-only panel at the top of the Get Lyrics run-task form (single file only):
- Backend: GET /file-browser/audio-meta?path= — ffprobe format tags + duration,
plus a second probe for embedded lyrics (USLT/SYLT/lyrics* keys, case-insensitive).
Returns { title, artist, duration, hasLyrics }; tolerant of missing tags/probe
failures.
- Client: files.audioMeta(path) + AudioMeta type in useFilesAPI.
- TaskRunnerModal: prefetch audioMeta for get-lyrics single-file runs (bypasses
the hasTrackPickers early-return, error-tolerant), and render AudioMetaPanel
above TaskInputForm — title/artist + a muted length + Lyrics: Yes/No chip,
filename fallback. Directories + other tasks unaffected (no panel, no probing).
Verified ffprobe logic on a real embedded-lyrics file. tsgo clean; formatted.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extract Audio now exists as a task, with recursion, multi-select scoping, a
format choice and multi-track handling — none of which the one-shot menu entry
had, since it always produced a single mp3.
/extract-audio stays because the file viewer's button plays its output rather
than saving it beside the video, but it no longer returns a cached file: like
transcription and OCR, it always redoes the work. The path is now named outRel,
since it is an output location rather than a cache.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both endpoints kept a copy under cache/ and returned it on the next call, and
also short-circuited when the sibling .md already existed. So a re-run never
re-ran: a bad transcription stayed bad, and there was no way to ask for a fresh
one. Every caller passes saveNextTo, so the cache-path return was dead code
anyway.
Both now always do the work and overwrite the sibling. CACHE_PREFIXES drops the
two prefixes, since /save-result has nothing left to promote for them; the tts
and audio caches are untouched.
Also fixes the task runner output being unreadable in light mode. The panel is a
fixed dark terminal, but stdout lines were classed text-foreground, which follows
the app theme and renders black on the dark background. They now inherit the
pre's own colour.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Onboarding was dead in three layers:
- The OnboardingAdmin screen was only reachable from a route block in App.tsx
that has been commented out, so it never rendered. Its ServerTypeCard carried
accountMode ('organization' | 'single'), inherited from the codebase this was
based on and meaningless for a single-user platform.
- Two /onboarding-complete endpoints, one public and one protected, that no
frontend code called. Both read a server_config key that was never written, so
both answered false while the app's own path defaulted to true.
- HomeScreen gated on settings.onboarding.complete to show a welcome panel, and
seedHomeDir created an Onboarding folder from DATA_PATH/Onboarding and
/Onboarding_Admin — neither seed directory exists, so it only ever produced an
empty folder.
Also drops the onboarding key from UserSettings and the now-empty home-header
panel from the default home layout.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
resolveUserPath and five sibling checks used startsWith(rootDir), which also
accepts a sibling directory whose name begins with the root's: from a root of
/home/br, "../br-backup/secret" resolves to /home/br-backup/secret and passed.
Compare against root + sep (or the root itself) via a shared isInside helper.
Verified the escape cases now deny while "", ".", and ordinary relative paths
still resolve.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Officer is single-user: the server owner is the only account, created once by
/auth/bootstrap. Everything that existed to serve additional users was
unreachable, so it is gone rather than left looking like it does something.
Accounts: drop the invite / resend-invite / delete / list-users routes and the
Users settings screen, the inert /auth/signup handler, and the account
verification chain it fed (verify, resend-verification, VerifyScreen, the
UserInvite + VerifyAdmin + VerifyRegistration templates). /auth/verify-token
survives for password resets only, and now requires a reset-password token
rather than accepting any signed JWT.
Roles: drop the users.role column and the four-value USER_ROLES enum. The
permissions table granted every role identical methods, and every
role === 'Super Admin' check was permanently true. The JWT no longer carries a
role claim.
Sandbox: remove sidecar/sandbox.ts and its five call sites. bwrap was selected
only for non-Super-Admin users, so it never ran. It was also not a usable agent
jail as written — --share-net, the project root (with .env) bound read-only,
and runuser dropping to the server's own uid. Rebuilding it for agent
containment would be a different construction, and git history keeps this one.
getHomeDir keeps its DATA_PATH meaning; the new getOwnerHomeDir resolves the
owner's real login home, which is what terminals, chats and task runs use.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
/download-video now delegates to the ReClip service (its own yt-dlp) and runs as
a background job: POST returns a jobId immediately and the client polls
GET /download-video/:jobId, so a large download no longer holds one long request
open (which was 504-ing behind the reverse proxy). the finished file is streamed
into the user's folder with a title-based name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
converting a folder now recursively probes every video and groups episodes by
track layout (audio language+channels, subtitle language). the pickers are
driven off the largest matching group; episodes with a different layout are
listed as skipped and converted separately. adds a /probe-folder endpoint and
passes the majority file list to run.sh as INPUT_INCLUDE.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add /file-browser/audio-tracks (list) and raw?audio=N (serve the video with
a chosen audio track via a cached -c copy remux, byte-range seekable). The
player shows an always-visible selector outside the controls; switching
reloads the source and restores the playhead. Works in Chromium, which
doesn't expose the audioTracks API.
Temp remux file keeps the real extension (a .tmp suffix breaks ffmpeg's
muxer selection); concurrent requests for a track share one remux.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add /file-browser/subtitles (list text subtitle tracks) and /subtitle-vtt
(extract one as WebVTT on demand); the VideoRenderer fetches the list,
renders <track> elements, and shows a CC selector to switch/turn off subs.
Track labels prefer title, then handler_name (mp4), then a real language,
falling back to Track N — so untagged tracks aren't shown as "und".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Drop the /transcode (and dead /transcode-audio) routes and the frontend
mkv/avi transcode wiring. Only browser-native formats (mp4, webm, mov,
m4v, ogv) are classified as video now; other containers fall through to
the generic file view.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
pastilhasandClaude Opus 5