085afe7604355c6ebf169f7ed343c91f28f583e1
90
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  pastilhasandClaude Opus 5
|
28673869c3 |
port the git section, and stop it overwriting an identity that already exists
Detects first, then asks. If there is a name and email configured it shows them and offers to change them, defaulting to no — the common reason to re-run this script is everything except this. If there is nothing configured it just asks. Default branch is master rather than main, unless the answer says otherwise. Three problems in the original, beyond running unconditionally: prompt_value accepts an empty answer, so pressing Enter wrote `user.name = ""`. An empty name is worse than none: unset makes git refuse to commit and say why, empty makes it commit with a blank author and never mention it. ask_required re-asks instead. core.editor was set to nvim four sections before Neovim is installed, so anything invoking the editor in between failed. Dropped for now rather than moved — it is a preference, and worth deciding separately. Nothing checked whether the writes worked. That last one was not theoretical. Testing against a throwaway account, all three writes failed and the section still printed "OK: written". `git config --global` needs no repository, but git stats the working directory on the way, looking for one — and the script runs from under the invoking user's home, which is 0750, so the target account cannot stat it: fatal: failed to stat '<cwd>': Permission denied The wrappers now run in a subshell from /, which every account can stat, and the caller checks the exit status and reads the value back before claiming success. Also recorded where it is written: docs/agent-git-identity.md says every agent Officer runs commits as the owner, because it runs as the owner. This is not only the human's identity, it is what git log attributes agent commits to — which is worth knowing while choosing it. Verified both paths: this host's existing identity is shown and left alone by default, and a fresh account gets a correct .gitconfig owned by that account with defaultBranch master. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
08e7de1b6d |
move unattended-upgrades into core utils, and make sure it is actually on
apt only. It is a Debian and Ubuntu package — dnf's equivalent is dnf-automatic
and pacman has no equivalent at all — so it is not a name to translate across the
other lists.
Installing the package is not by itself enough to switch it on. The apt-daily
timers read /etc/apt/apt.conf.d/20auto-upgrades, and on this host no package owns
that file: `dpkg -S` says it came from nothing, which means the original script
wrote it. So the section checks for it and offers to write it, rather than
assuming the install did.
Beyond that it only reports, because the interesting facts about unattended
upgrades are not whether it installed:
It never reboots on its own, deliberately. A kernel or libc update is installed
and then not used, and the machine keeps running the old one until it restarts.
Nothing announces that except /var/run/reboot-required, which nobody reads. The
section prints it, names the packages waiting, and puts it in the summary — it
is the failure people do not notice for months.
Ubuntu's Allowed-Origins includes plain ${distro_codename} as well as
-security, so this takes ordinary updates too, not only security ones.
Verified both paths: this host reports enabled with no reboot pending, and
pointing AUTO_UPGRADES at a temp file exercises the enable path and writes the
three periodic settings.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
0da184d082 |
verify the fail2ban defaults instead of recalling them
The previous commit hedged on the ban policy because I thought fail2ban was not installed here. It is — the earlier ubuntu-setup run installed it — so the claim could be checked rather than remembered. Checked, and it was right: /etc/fail2ban/jail.d/defaults-debian.conf ships `[sshd] enabled = true`, and the running jail reports maxretry 5, findtime 600, bantime 600. This host has banned 6 addresses already. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
f176b92378 |
move fail2ban into core utils, and reduce its section to a status report
Your call, and the reasoning holds: it configures nothing of its own, an existing install with its own jails is untouched because pkg_install never names a package that is already present, and it is worth having by default. One thing recorded where it is declared, because it makes fail2ban unlike every other entry in that list: it is a daemon, not a binary. Installing it starts it, and Debian and Ubuntu ship an enabled sshd jail — so from that moment an address that fails to log in five times in ten minutes is blocked for ten. That is the point of it, and it includes you, from wherever you are connecting. (Recalled rather than verified: fail2ban is not installed on this host and the sandbox would not let me unpack the .deb to check the shipped jail.d file.) The section no longer installs anything. It reports whether fail2ban is running, which jails are active, and how to unban an address — because a daemon quietly blocking connections is worth knowing about before it blocks yours, and a run that installs it as one name in a list of twenty gives no hint that anything started. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
bdf13331ae |
port the static IP section, and offer the actual fix for the reboot-changes-IP problem
Homelab only, as it should always have been. On a vps the provider's DHCP is
authoritative and already stable, and pinning an address there is how an instance
is stranded; on dev the machine moves between networks and a fixed address is the
opposite of what is wanted. Both say so rather than skipping quietly.
The more useful change is that a static address is no longer the only answer
offered, because it is not the right one for the problem it was added to solve.
A fresh Ubuntu box taking a new IP on every reboot is not the router
misbehaving. systemd-networkd's ClientIdentifier defaults to `duid` — man
systemd.network is explicit — so the machine introduces itself to DHCP with an
RFC 4361 client ID built from an IAID and a DUID. This host shows it:
DHCP4 Client ID: IAID:0x56504d98/DUID
Consumer routers key leases and reservations on the MAC. The two never match, so
the router does not recognise the machine as one it has seen and hands out the
next free address — and a reservation pinned to the MAC is never honoured, which
is the part that makes the router look broken.
`dhcp-identifier: mac` in netplan sets ClientIdentifier=mac and the router sees
what it expects. DHCP keeps working, reservations start being honoured, and
nothing is pinned on the machine. That is now the first option, with the static
address second and still carrying the original's warnings.
It is written as its own 99- netplan file and merged with whatever the installer
or cloud-init already wrote, rather than this script parsing and rewriting their
YAML. Deliberately NOT applied: it takes effect at the next reboot, which is the
moment the problem shows up anyway, so there is nothing to gain by dropping the
network now. `netplan generate` validates before either file is kept, and the
file is removed again if it does not.
Found and fixed while testing: dhcp_client_identifier parsed the value with
awk -F': *' and took field 2 — but the value is itself "IAID:0x…/DUID", so the
split yielded "IAID", the DUID test failed, and the helper reported "mac" on a
machine that was plainly sending a DUID. It would have told the user the opposite
of the truth about their own problem. Reads everything after the first colon now.
Verified on this host: correctly reports duid, explains why, and renders both the
homelab and vps paths.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
7a5cf89819 |
port the DNS section, as a choice rather than a decision
The original hardcoded Cloudflare plus Google with no way to say otherwise, and
rewrote /etc/systemd/resolved.conf wholesale — discarding DNSSEC, DNSOverTLS,
Domains and Cache if anything had set them, without mentioning it had. The
settings are a drop-in now, and the resolver is picked from a list with a
"keep what is there" that is the default.
The part worth having explicit is which layer is being changed. With
systemd-resolved there are two:
per-link what DHCP handed each interface, and what Tailscale installs on its
own. These answer for that link's domains — the provider's internal
names, the tailnet — and are printed by this step precisely to show
they are NOT being touched. Overriding them is how private
networking quietly stops resolving.
global the resolver used when no link claims the query. This is the one
the step sets.
On this host that distinction is live: eth0 has Hetzner's resolvers and
tailscale0 has 100.100.100.100, which is what answers ts.pastilhas.dev. Both are
left alone.
The drop-in is named 99- because systemd reads drop-ins in lexical order and the
LAST value wins. That is the opposite of sshd, whose drop-in three files away in
this same directory has to sort FIRST. Both are stated where they are written,
because getting it backwards fails silently in either direction.
resolv.conf is checked for actually pointing at resolved's stub before the
drop-in is trusted to do anything — a machine where something replaced the
symlink with a static file bypasses resolved entirely.
Resolution is tested afterwards rather than assumed. A resolver that does not
answer makes every later step fail for a reason that has nothing to do with it,
so that failure is reported and recorded rather than swallowed.
The choice names what each provider actually is, including that a resolver sees
every name the machine looks up.
Verified both paths against this host: keep reports unchanged, Quad9 renders the
right addresses, and the per-link display shows Hetzner and Tailscale correctly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
192293cdca |
offer to add an ssh key even when one already exists
The zip option was already gone — it never came across in the port, since the file is key material that cannot live in the repository and the script no longer sits next to it. Pasting a public key was already the first option. What was missing is the case where the account HAS a key: the section went straight to hardening, so there was no way to authorise a second machine, a rebuilt laptop or anyone else, and the original had no way to do it at all. The same menu is now offered either way. What differs is whether it can be declined without consequence: with no key, declining means the hardening below refuses too, and the run says so rather than quietly moving on. confirm() takes an optional default so this one can be [y/N]. Most questions in this script are "do the thing you already asked for" and Enter should mean yes; a genuine extra defaulting to yes is how people end up agreeing to things by reflex. A pasted key is trimmed before validation. Copying from a terminal or a password manager routinely brings leading or trailing whitespace, and ssh-keygen will not parse a key with it attached — which would have read as "that is not a valid key" for a key that is perfectly fine. Also corrected the reason unzip is in core utils, which still said it was there to open ssh-keys.zip. Verified: the add-another prompt appears and defaults to no, a whitespace-wrapped key is trimmed and accepted, and the already-hardened path is unchanged. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
9591f917f5 |
port ssh keys and hardening as one section, and make the hardening actually work
They were two sections, and being two is what let the second lock you out of a machine the first had failed to put a key on. Step 8 could warn-and-skip — no ssh-keys.zip, or an unrecognised menu choice, since its case had no default arm — and still mark itself done; step 9 then disabled password authentication and root login regardless. No key, no password, no root, on a box that may be in a datacentre. Nothing here turns off password authentication without first confirming a usable key is in place, and the refusal says why rather than skipping quietly. The hardening also did not do anything on a modern Ubuntu, and could not be seen not to: It sed'd /etc/ssh/sshd_config. Ubuntu includes /etc/ssh/sshd_config.d/*.conf from line 12 of that file, and sshd takes the FIRST value it obtains for a keyword rather than the last. Cloud images ship 50-cloud-init.conf containing `PasswordAuthentication yes`, read long before the line the sed edited. The run reported "SSH hardened" and password login stayed on. The settings now go in a drop-in named 01-machine-setup.conf, which is the only placement that wins under first-value-wins. It also sed'd ChallengeResponseAuthentication, renamed to KbdInteractiveAuthentication in OpenSSH 8.7. On 24.04 the old name is nowhere in the file, so that substitution matched nothing at all. State is read with `sshd -T`, which reports what sshd resolves across the main file and every drop-in — reading the config files tells you what is written, not what wins. Keys are counted by asking ssh-keygen to parse authorized_keys rather than by counting lines: comments, blanks and a half-finished paste all look like lines, and "there is a file" is not "there is a key that works". A pasted key is validated before it is stored, and matched on the key body rather than the whole line, so re-running does not authorise the same key four times over four runs. sshd -t validates the new config before anything is reloaded, and the drop-in is restored or removed if it does not parse — a config sshd refuses is a machine with no ssh after the next restart. Reload rather than restart, so the session this is running over is not the experiment, and the run says out loud to test a new connection before closing the current one. Generating a keypair now says the obvious thing the original did not: the private key is on the server, and a private key living on the machine it opens is a spare copy of the lock rather than a second factor. Verified against this host (1 key, already hardened, correctly does nothing) and with sshd_effective stubbed to a fresh-cloud-image state — the guard refuses and harden_sshd is never reached. Also verified key validation, dedup and 0700/0600 permissions. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
b1cc916258 |
detect root by uid, not by the name root
A provider whose image logs you in as "ubuntu" at uid 0 would have walked straight past the previous check, which compared the string. What makes an account root is uid 0; "root" is only the usual label for it. Two places now ask id -u rather than comparing names: the answer — an account at uid 0 is refused whatever it is called, and says which case it is rather than a bare "not root" the invoker — the warning about working as root fires when SUDO_USER is unset OR when SUDO_USER is itself uid 0. The second is the one that hides: sudo from a uid-0 account sets SUDO_USER to something that reads like an ordinary user and is not. The EUID check that requires the script to run as root was already uid-based and is unchanged. Verified by creating a real uid-0 account named ubuntu on this box: refused with the uid named, where the name check accepted it. That account has been removed — userdel refused it at first because it matches by uid and saw PID 1 running as uid 0, so -f was needed, and deliberately not -r, since its home was /root. Confirmed afterwards that root, /root, root's shadow entry and sudo are all intact and that root is once again the only uid-0 account. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
d9d4085033 |
warn against working as root at the username prompt
root was already refused as an answer, but only the refusal said so — and only after somebody typed it. The advice now comes with the question, along with why: no safety net, a typo in a path that deletes instead of refusing, and nothing to distinguish you from a process that got out of hand. An extra warning when SUDO_USER is unset. That means the script was started as root rather than through sudo, which usually means root is how they log in — the exact situation the general advice is about, and the one where general advice is easiest to assume is aimed at somebody else. It says so plainly instead. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
c0eb3e3a85 |
create the user account first, and fix the sudoers filename bug that found
The user account section is now the first thing that acts, ahead of disk space.
The reason is a real defect, not tidiness. If the account does not exist yet,
USER_HOME is a path that is not there — and the ballast offers to put its file in
it, where ballast_create's `mkdir -p` runs as root and creates /home/<name> owned
by root:root. adduser afterwards finds the directory already present and does not
populate or chown it, so the account ends up with a home it cannot write to.
Making the account before any step can write into its home removes the ordering
entirely.
USER_HOME is re-read from getent after adduser runs. Until that point it is the
/home/<name> guess, because there is nothing to look up; adduser is free to have
used something else and every later step writes there.
Found while testing that, and worse than the thing it was testing:
local user="$1" dest="/etc/sudoers.d/99-${user}-nopasswd"
bash expands ${user} before the assignment to user has happened, so dest came out
as /etc/sudoers.d/99--nopasswd with the name missing. The rule inside was correct,
which is what made it invisible — visudo passes, sudo works, and the account
really does get passwordless sudo. What breaks is everything around it: every
account granted this way writes to that same file, so a second grant silently
overwrites the first and revokes it; and has_passwordless_sudo looks for
99-<user>-nopasswd, never finds it, and re-grants on every run forever.
Split into separate declarations, with the reason recorded where it happened, and
an empty username is now refused outright. Scanned the other lib files for the
same shape — the remaining multi-assignment locals only read positional
parameters, which is safe.
The stray /etc/sudoers.d/99--nopasswd this created on the dev box during testing
has been removed and visudo -c re-verified.
Verified with a real throwaway account: correctly reports not-granted before,
writes 99-msdemo-nopasswd as root:root 0440 with the right rule, reports granted
after, and leaves sudoers valid.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
fbb90c917d |
default the username to whoever ran sudo, and look up their real home
Three changes to the question at the top of the run. USER_HOME is looked up rather than assumed. The original built "/home/$USERNAME", which is only the usual answer — an account created with a different home, or one whose home was moved, had every later step writing to a directory that was not theirs. getent passwd knows; the /home guess remains only as the fallback for an account that does not exist yet, where there is nothing to look up. The default is now whoever invoked sudo. On a re-run, or on a machine that is already somebody's, that is the answer every time, and retyping it is a chance to typo it into creating a second account. root invoking the script directly offers no default, since root is never the account being set up — and is refused if typed. The name is validated against the portable shape of a Linux account name before anything else happens. Letting adduser refuse it later means several questions have already been answered against a name that was never going to work. It also no longer goes through prompt_value, which obeys any environment variable matching the name it is filling in. USERNAME is set by some login environments, and a variable this script silently takes as an answer should not be one that might already be set for unrelated reasons. SETUP_USERNAME is the explicit override. The tmux config write moved out of the user section entirely. It was there only because the original copied it right after adduser, where $USER_HOME first exists. It is a dotfile and belongs with .zshrc and the starship config in the shell section. Verified: defaults to the sudo invoker, resolves daemon's home to /usr/sbin rather than /home/daemon, falls back to /home for an account that does not exist, and rejects a name with a space, a leading digit, one over 32 characters, and root. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
3fb0e5c887 |
port the user account section, and stop clobbering files in the home
Two real defects fixed on the way across.
The sudoers write was in the wrong order. The original echoed the rule straight
into /etc/sudoers.d, validated it afterwards, and chmod'd it later still. A
malformed file there breaks sudo COMPLETELY — and you cannot sudo to repair it,
so on a remote machine that is a rescue console — and so does one with loose
permissions, because sudo refuses to read its own configuration. Both of those
windows were live in the original ordering. grant_passwordless_sudo now writes a
temp file, runs visudo -c against it, and only then places it with install(1),
which applies the content and the 0440 mode in one step. Nothing reaches
/etc/sudoers.d that has not already been validated.
The .tmux.conf copy overwrote whatever was in the home on every run. lib/files.sh
adds the two shapes that stop this whole class of thing:
install_config installs when absent, does nothing when identical, and keeps
what the user wrote when it differs — printing the cp to take
ours, so the choice stays theirs
append_once wraps a block in named markers so a second run recognises its
own work; also lets a human see which lines came from this
script and remove them as a unit
append_once is what the five unguarded `cat >>` into .zshrc need when those
sections are ported — a second pass currently duplicates the starship init, the
nvim PATH, bun, deno and the aliases.
Passwordless sudo is asked separately from creating the account, because it is a
security posture rather than part of making a user, and the cost is stated: a key
that can log into this account is root without a further step. Officer's actual
requirement is stated too — os-user-shell.ts runs `sudo -n`, and a prompt it
cannot answer surfaces as a permissions error rather than a question — and
refusing records that consequence in the summary instead of a bare "skipped".
Verified: all three install_config outcomes, append_once writing exactly once
across two runs, visudo rejecting junk before anything is installed, and the
section reporting correctly against this host's existing account.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
458510a0a8 |
scope sleep to homelab, and port the boot hang fix
Sleep and suspend is homelab only now. The two exclusions are for different reasons and both are stated in the run rather than left implicit: dev — a laptop should sleep; disabling it is a hot bag and a flat battery. vps — not merely unnecessary, harmful. A virtual machine has no lid and no power button, but the provider's Shut down control works by sending an ACPI power button event. HandlePowerKey=ignore makes the VM ignore it, so graceful shutdown requests silently do nothing and the instance is hard-killed instead. systemd defaults that key to poweroff for exactly this reason. The boot hang fix is everything except vps, where systemd-networkd genuinely manages the network and the unit is load-bearing. Rather than asking whether boot "feels slow" — a question people answer from memory of the worst time it happened — the step prints what the unit actually cost on this boot, from systemd's own accounting. On this host that is 14ms, which ends the discussion. On a NetworkManager desktop it is two minutes, which also ends it. On dev the wording says outright that a small number here means there is nothing to do. The original's live guard is kept and is what actually decides: NetworkManager active and networkd not. Anything else, including "cannot tell", is left alone, and the reason is printed. The warning against disabling systemd-networkd outright is carried across into the library, where the alternative would be attempted. Verified all three roles on this host, which is a networkd machine: homelab and dev both correctly refuse and explain, vps skips as not applicable, and the timing helper reads 14ms out of systemd-analyze. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
c87127ff93 |
port the sleep and suspend section
The original ran unconditionally, so a laptop that went through it stopped suspending — a hot bag and a flat battery. It is a server concern: dev is skipped with the reason printed, like the ballast. Four things wrong with it beyond the role: HandleLidSwitchDocked was never set. A laptop used as a homelab server, docked and closed, still suspends — which is the exact machine this setting exists for. Added. RuntimeDirectorySize=10% was set alongside the sleep handlers. It is the size of /run, has nothing to do with sleeping, and 10% is systemd's own default, so the line never did anything. Dropped. systemd-logind was restarted on every pass whether or not anything changed, disturbing live sessions for nothing. The step now checks first and does not reach the restart when the machine is already configured. (The platform's own scripts/setup-old/setup.sh already had this guard; the machine script did not.) The settings were sed'd into logind.conf in place. They are a drop-in at /etc/systemd/logind.conf.d/99-machine-setup.conf now, so what this script set is one file that can be read or removed on its own. Current state is printed before anything is asked — whether the targets are masked, and what the lid, idle and power-key handlers actually do. logind_effective reads the main file and every drop-in and takes the last match, since a drop-in overrides logind.conf; reading only the main file reports a configured machine as unconfigured. The power-button consequence is stated rather than left to be discovered: after this, pressing power physically does nothing and a clean shutdown is `sudo poweroff`. WSL has no logind and cannot suspend, and says so. Verified both roles on this host, which the old script had already configured — correctly reports the targets masked and the handlers set, and correctly reports itself not fully configured because HandleLidSwitchDocked is missing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
6ffd3534bd |
do not offer the ballast on a dev machine, and route its alerts through one place
Servers only now. On a machine you sit at, a filling disk announces itself — the editor refuses to save, the browser complains — and you are there to deal with it. The reserve is for the box nobody is watching, where the first sign is a service that stopped working hours ago. Skipped rather than asked, but said out loud with the reason and recorded in the summary. A section that silently produces no output is indistinguishable from one that failed. The cron this section installs was already there and is unchanged: /etc/cron.d runs the checker as root every ten minutes, and it deletes the ballast when free space falls under the threshold. What changed is where its message goes. Both alerts now run through one notify() inside the generated checker rather than calling logger directly, so there is a single place to add a second channel. Today it is still syslog only — the message lands in the journal and nowhere else, so nobody learns about it until they go looking, which is precisely the wrong moment. Push, mail or Officer's own notify sidecar hook in there. It also echoes to stderr now, so running the checker by hand shows the message instead of appearing to do nothing. Verified: dev reports not-applicable and asks nothing, vps still asks and records a refusal, and the regenerated checker parses and reports status. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
d19dc5a92a |
ask where the ballast goes and how big it is
Three questions instead of one, because the two the original never asked are the
two that decide whether the thing is useful.
1. Do you want one, with the explanation first.
2. Where. Home (easiest to find again months from now), beside Officer, or a
path typed in. This is not tidiness: the checker measures its own directory,
so a ballast only protects the filesystem it sits on. Choosing where it goes
is choosing which mount is covered.
3. How much, as 5/10/20% — with the actual numbers, and with what would be LEFT
rather than only what is taken:
[1] 5% — reserves 2.9GB leaving 54.3GB free
[2] 10% — reserves 5.8GB leaving 51.4GB free
[3] 20% — reserves 11.5GB leaving 45.7GB free
A percentage on its own is unanswerable. The number that decides it is the
one on the right: the reserve has to be big enough to matter and small
enough not to be the thing that filled the disk.
The size is computed against the filesystem the chosen path lands on, after the
location is known, so the percentages are of the right disk. ballast_free_kb
walks up to a directory that exists, since nothing has created the target yet.
An existing ballast in either default location is found and left alone rather
than a second one being made beside it.
Verified end to end in a temp home: created at the chosen path, 2.9G for 5% of
57.1GB, checker installed and reporting it present.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
d4b9b7b334 |
ask where Officer should be installed, in pre-flight
OFFICER_ROOT, defaulting to <user home>/officerdev. One directory holding the four things Officer is made of, per docs/sidecar-app-store.md — the app, its data, the item store, and any containers the app store provisions — so the whole installation can be moved, backed up or deleted as a unit. Asked at the start with the other questions rather than at the point it is first needed. It decides the shape of several later steps: where the repository is cloned, where DATA_PATH sits beside it, and which filesystem the app store's bind mounts come out of. Asking once up front also means the run can be described before it starts rather than discovered as it goes. A leading ~ is expanded explicitly. It arrives as a literal from a read or an environment variable — nothing expands it there — and would otherwise create a directory actually named "~" in whatever the working directory happened to be. Relative paths are refused with the value named, and a trailing slash is trimmed so the path composes cleanly with what gets appended to it. Nothing creates the directory yet; that belongs to officer-setup. This records the answer and reports it, including whether it already exists. Verified: Enter takes the default, ~ expands, trailing slash trims, OFFICER_ROOT in the environment skips the prompt, and a relative path fails with the value named. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
6947284f1b |
check the root filesystem is actually using the whole drive
New first section, before anything else that changes the machine, because the
swapfile and the ballast both size themselves from free disk.
Ubuntu Server's installer on its defaults gives the root logical volume a fixed
size and leaves the rest of the drive as unallocated extents in the volume group.
On a 2TB disk that is a ~100G root with nothing to indicate a problem: lsblk
shows the whole drive, df shows 100G, and the two are never seen side by side
until the day it fills. Growing a virtual disk at a provider leaves the same
shape one layer down, and so does resizing a partition without telling the
filesystem inside it.
Three layers, any of which can be the short one, so all three are measured and
printed together:
drive: 76.3GB /dev/sda
volume: 76.1GB /dev/sda1
filesystem: 76.1GB ext4, mounted at /
Seeing them in one place is most of the value. The fix is then whichever layer is
short: lvextend for free extents, growpart for a partition that stops early
(followed by pvresize and lvextend when LVM is in the way), or resize2fs alone
when only the filesystem is behind.
Only ever grows. Nothing here shrinks, creates or deletes a partition, and ext4,
xfs and btrfs all grow while mounted — so no unmount, no reboot, and a failure
part-way leaves a smaller filesystem on a larger container, which is the state it
started in.
growpart is the authority on whether a partition can move — it exits 1 with
NOCHANGE when the partition already reaches the end — but it comes from
cloud-guest-utils, which is not on every image. Installing a package purely to
ask a question is too eager, so plain arithmetic on the device sizes decides
whether it is even worth looking, and only then is growpart fetched.
A gigabyte of slack before anything is reported: a filesystem is always slightly
smaller than its container, and reporting journal and reserved-block overhead as
reclaimable space would make this section cry wolf on every machine.
Verified on this host: plain ext4 partition filling its disk, correctly reports
nothing to reclaim, and every helper returns the right device and size.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
9b0e05bfd8 |
add three resource-pressure sections, each asked rather than assumed
Swap covers memory pressure. These are its neighbours: 8. Emergency disk ballast the same valve, for disk 9. earlyoom what happens when swap runs out too 10. inotify watch limit the silent one All three follow the rule this script now works to: the role sets which way the recommendation points, never whether the question is asked. A dev machine is still offered the ballast, with the recommendation pointing the other way; a server is still offered the inotify raise, because anything running `bun --watch` or serving a file browser is a watcher too. The ballast is section 22 of the original, moved up beside swap where it belongs and moved out of the user's home. The original wrote the checker into $USER_HOME/.local/bin and ran it from a root cron — a root cron executing a script in a directory its owner can write is a privilege escalation waiting to be noticed. Moot on a box where that user already has passwordless sudo, but wrong. Both the checker and the file are in root-owned system paths now. Two bugs found by running the generated checker rather than reading it: It df'd the ballast's own directory, which does not exist before the ballast is created — and with `set -euo pipefail` that meant cron mailing an error every ten minutes. It now walks up to a directory that exists, and the installer creates the directory itself rather than depending on the create step. The inotify text claimed a default of 8192. This host is at 29461: Ubuntu raised it, and stating a number the reader can see is wrong on their own screen undermines the rest of the explanation. It now describes the failure instead and prints the machine's actual value. earlyoom is a distro package and a systemd unit, so it is checked with `systemctl is-active` and reports honestly when it installs but fails to start. Verified: checker --status and its no-op path both exit 0 with no directory present, and the helpers report correctly against this host. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
716a6e2750 |
port the swap section, and size it against the disk
Four things the original got wrong, all of which only show up on a machine that is not this one: It detected swap with `swapon --show | grep -q '/'` — a test for a swap FILE. A machine using zram or a swap partition reports no swap at all, and the step would add a swapfile beside working swap. Reads SwapTotal from /proc/meminfo now, which covers every kind. It never looked at free disk. On a VPS with 4G free and 16G of RAM it would fallocate 8G, fail, and take the run down under `set -e`. The recommendation is now capped by what is actually there, keeping 5G back, and refuses rather than shrinking to something useless. fallocate was assumed to work. It produces a file that btrfs and zfs will not swap on, so dd is the fallback — slow, but it always works. swappiness was written by sed'ing /etc/sysctl.conf in place, tangling it with whatever else lives there. It is a drop-in at /etc/sysctl.d now, so what this script set is visible as its own file. Role-dependent, which is the first use of MACHINE_ROLE: swappiness 10 on a server, where swapping is the emergency valve and a page fault on a request path is latency somebody is waiting for; the kernel default of 60 on dev, where swapping out an application nobody has touched in an hour is exactly what you want. WSL is left alone entirely — WSL2 runs its own managed swap inside the VM, and a swapfile written here is wasted disk the kernel will not use. Sizes are reported rounded rather than floored. A 4 GiB swapfile is 4194300 kB, which floors to 3 and reads as though a gigabyte went missing. Free disk stays floored, deliberately: it decides how much to allocate, and rounding up invents space. Verified on this host — 4G RAM, 4G existing swap correctly detected and left alone — and with the disk check stubbed at 6G free (caps to 1G) and 3G free (refuses). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
b5948f9673 |
refresh the package index in pre-flight, not inside a skippable step
The refresh lived inside "System update", which `step` skips when its name is already in the progress file. So a resumed run — the common case, since that is what the progress file is for — installed core utils, added the fastfetch PPA and set up the Docker repo against whatever the index happened to say hours or days earlier. On a box left overnight that is a stale index and a "package not found" somewhere unrelated. It now runs in pre-flight, unconditionally, before any step exists to skip it. `apt-get upgrade` stays where it was and stays confirmable: refreshing the index changes nothing on the machine, upgrading is the one thing that does. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
6480788979 |
port the timezone section
The original took whatever was typed and handed it straight to timedatectl. An unknown zone — a typo, a guess at the spelling — fails there, and under `set -e` that takes the whole run down four steps in. Names are now checked against /usr/share/zoneinfo before use, and a bad one just re-asks. It also never showed what the machine was already set to, and defaulted to option 1 (UTC) on Enter, so pressing return on a correctly-configured box silently moved it. Now the current zone is printed, Enter keeps it, and a zone equal to the current one reports nothing to do rather than setting it again. timezone_current reads three sources — timedatectl, /etc/timezone, then the /etc/localtime symlink — because they differ in availability rather than in answer: timedatectl needs systemd, /etc/timezone is Debian's, and the symlink is the one that is always there. timezone_set writes through timedatectl where there is a systemd to talk to and the files directly otherwise, which is what it would have written anyway; that is also the WSL path, where timedatectl exists but does nothing. Europe/Berlin added to the shortlist; TIMEZONE in the environment answers the prompt ahead of time and is validated the same way, failing early with the bad value named. Verified detection (UTC here), validation of four names, and the env-var rejection path. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
163f8d5899 |
port the locale section
Was three unconditional lines that ran on every pass and reported success either way. Now it checks, says what it found, and asks. The original tracked one fact where there are two: what a new login shell is told to use LANG in /etc/default/locale whether that locale actually exists whether it has been generated Setting the first without the second is what produces "setlocale: LC_ALL: cannot change locale" on every ssh login and every perl invocation. They fail differently, so the step names whichever one is actually missing rather than reporting a flat "locale not set". Also fixes two things the original would have hit on a minimal image: locale-gen comes from the `locales` package, which cloud base images do not ship and which is not in core utils. It is installed on demand rather than assumed, instead of failing with "locale-gen: command not found". The locale is uncommented in /etc/locale.gen rather than only passed to locale-gen as an argument. A locale generated by argument alone disappears the next time anything regenerates from that file. `locale -a` prints en_US.utf8 where the configuration spells it en_US.UTF-8, so both sides are folded before comparing — a literal match reports a working locale as missing. LOCALE in the environment overrides the default. pacman, dnf and brew branches are written but unreachable while the pre-flight gate is apt-only; macOS has no system locale to set and says so. Verified both paths on this host: en_US.UTF-8 reports already set and generated, pt_PT.UTF-8 correctly reports both facts missing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
1beb357f2e |
drop the ominous wording from the system update prompt
"the only step that changes software already on this machine" is true, and reads like a warning about something dangerous rather than a description of apt upgrade. The reasoning stays in the section comment, where it explains why this is its own step; the prompt just says what it does. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
454faf5406 |
list what the system update would actually upgrade
The section asked "Proceed?" without saying what it was proposing to change — the one question in the script where the answer matters most, since it is the only step that moves versions of software already on the machine. pkg_upgradable now names them, from `apt-get upgrade -s`: the same calculation the real run does, as opposed to `apt list --upgradable`, which also lists packages held back that would not actually move. Nothing to upgrade means no prompt at all, and the summary says so rather than claiming an upgrade happened. The list is capped at 25 with a count of the rest, because a box untouched for months lists hundreds and a wall of names is no more informative than the number. Verified against this host (0 upgradable, so it reports current and does not ask) and with a stubbed 40-package list for the cap. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
f896d4882f |
one section per concern, each announced and confirmed before it acts
Three sections where there were two, and none of them touches the machine until you say so: 2. System update upgrades what is already installed 3. Core utils what the distribution provides 4. Command-line tools lazydocker, lazygit, starship, fastfetch The split matters because these are different kinds of change and deserve separate answers. System update is the only step in the whole script that moves versions of software already on the machine; core utils only ever adds what is absent; and the four tools are upstream binaries the distribution does not ship at all. Previously the update and the core packages were one step and the tools were tacked onto the end of it, so agreeing to "essentials" meant agreeing to all three at once. Every section now prints what it will install and what it is leaving alone, then asks. Enter means yes — unlike the machine-role question, which has no default, because these are "do the thing you already asked for" and making twenty of them require a deliberate keystroke would train people to hold the y key down. ASSUME_YES=1 answers all of them for an unattended run, and EOF fails with that named rather than spinning. Refusing is recorded rather than glossed: LAST_SKIPPED feeds the summary, so a declined section reads "Core utils: SKIPPED by request — cowsay neofetch" instead of quietly reporting nothing installed. Nothing to install means no prompt at all — there is nothing to agree to. announce_plan takes the array NAMES rather than their contents, because once a list has been through word splitting an empty one cannot be told from a missing one. Verified all three paths: accept, refuse, and nothing-to-do. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
a5ef9f7662 |
report what a section actually installed, not what it was asked for
The summary claimed credit for everything in a section's list, including the packages it had just decided to leave alone — so a run that installed nothing still ended with "Command-line tools: lazydocker lazygit starship fastfetch". The announce above it said "nothing, all present" in the same breath. pkg_install and tools_install now record LAST_INSTALLED and LAST_KEPT, and summarise_last turns those into one honest line: Core packages installed: btop tmux (17 already present) Command-line tools: already present, nothing installed Verified all three shapes — everything present, nothing present, and mixed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
dd655577e3 |
make the machine-role question require an answer
No default, and it is the only question in the script like that. A guessed default is right often enough to be trusted and wrong in exactly the case that costs the most — pinning a static IP on a rented box, or leaving the firewall open on one. Every branch downstream is about what this machine is exposed to, so it is worth one deliberate keystroke rather than an Enter. Empty and unrecognised answers re-ask rather than aborting; a failed read means EOF rather than a wrong answer, and fails with the environment variable named, because otherwise the loop spins forever the first time this runs unattended. Drops guess_machine_role, which existed only to supply that default. default_iface stays — the static IP section needs it when it is ported. MACHINE_ROLE in the environment still answers it ahead of time. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
5cb243eed9 |
port into a clean script instead of editing the original in place
Your call, and the right one. Editing in place let mis-grouped code sit unnoticed until it scrolled past in a live run — which is exactly how the four upstream binaries buried in "System Update & Essentials" were found. Porting forces the question of where each thing belongs before it runs, not after. machine-setup.sh now contains only what has actually been worked through: pre-flight, system update and core packages, command-line tools, and the summary. 1149 lines down to 172. The sections still to come are listed in a NOT PORTED YET block, in order, and each arrives as its own commit. The original is beside the other superseded scripts as scripts/setup-old/setup-ubuntu.sh — verified byte-identical to the live /root/ubuntu-setup copy — so porting reads from a file in the repo rather than from root's home. Two claims trimmed from the ported summary, because they were true of the old script and not of this one yet: it reported the shell as "zsh (Oh My Zsh + Starship)" unconditionally, and told you to reconnect as a user it had not created. Replaced with what pre-flight actually knows — system, role, user. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
7622239949 |
split the upstream binaries out of the package section
lazydocker, lazygit, starship and fastfetch were buried inside "System Update &
Essentials", after the package install and with no announcement — so a run
appeared to be installing system packages and then started pulling tarballs and
printing a five-shell starship tutorial. They are a different thing: upstream
binaries on their own release cadence, not anything the distribution ships. Now
their own step, announced in the same shape as the package section.
Each is checked before it is fetched. The original re-ran every installer on
every run, which is why a machine that already had starship got it reinstalled
along with its "add this to your ~/.zshrc" instructions — advice this script
does not want followed, since it writes the shell config itself. Its output is
now dropped; errors still surface.
Two real bugs fixed on the way:
lazygit's asset name was hardcoded to x86_64, so on arm64 the download 404s
and tar fails partway through the run. It now maps ARCH, and spells the
architectures the way lazygit does rather than the way we do.
The version was extracted with `tr -d 'v'`, which deletes every v in the
string rather than the leading one. `${version#v}` instead.
fastfetch stays a package but stops assuming the PPA is needed: Ubuntu picked
it up in 24.10, so the repository is now checked first and the PPA added only
where the archive has nothing. Verified on this host — noble genuinely has no
candidate, so the PPA is still the only source here.
Verified both branches of tools_install by stubbing the presence check.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
bba6d854bc |
stop the run at the end of the rewritten sections
A WIP boundary after section 2 so the finished part can be run start to finish on its own, without the untouched sections below acting on the machine. It moves down as each section is worked through and goes away when the walk ends. Also ignores .setup-progress, which the script writes beside itself and is per-machine. The exit message names it, because with it in place a second run skips section 2 and the rewritten part cannot be re-felt from scratch. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
dbdef23d29 |
install what is missing and keep what is there, per package manager
lib/packages.sh, and section 2 wired to it.
The rule it exists to enforce: `apt-get install <present-package>` is not a
no-op, it upgrades the package if the repository has a newer one. On a machine
somebody already uses that silently moves a version they chose, and a setup
script is the last thing that should do that behind their back. pkg_install
queries the package database first and names only the genuinely absent packages
on the command line — a package already installed is never passed to apt at all.
It also says so out loud, every time, because a provisioning run should not be
opaque about what it is doing to the machine:
:: Core packages — installs what is missing, keeps what you already have
already here: curl ca-certificates gnupg git jq …
to install: btop tmux
Section 2's flat list of 19 is now pkgs_core(), split per package manager rather
than through a canonical-name table with overrides. The names genuinely disagree
(build-essential/base-devel, fd-find/fd) and three of them are not packages
elsewhere at all — apt-transport-https, lsb-release and software-properties-common
are apt concepts that exist to let later steps add the Docker repo and the
fastfetch PPA. A `case $PM` shows what each system actually gets, in one place.
Of those 19, six are load-bearing and the rest are the environment. Only
build-essential reaches beyond itself: it is a meta-package, so on a box with a
pinned gcc it pulls the distribution default alongside. Noted where it is
declared; it is the first thing to move out of core if that ever bites.
apt-get upgrade stays, but as its own announced step — it is the one place that
deliberately moves versions, rather than something that happens as a side effect
of asking for a tool.
DEBIAN_FRONTEND=noninteractive and NEEDRESTART_MODE=a now live inside the
helpers. needrestart has been on by default since Ubuntu 22.04 and stops to ask
which services to restart, which is how an unattended run ends up silently
waiting for a keypress.
dpkg-query on the status field rather than `dpkg -s`, which also succeeds for a
package removed but leaving its config behind — that state would read as present
and never be reinstalled.
Verified against this host's real dpkg database: all 19 report present, and a
mixed list correctly passes only the absent ones through.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
41ff8030e9 |
ask what the machine is for, once, in pre-flight
MACHINE_ROLE is homelab, vps or dev, and several steps have a different right answer per role with no way to work it out themselves: whether the address is yours to pin (static IP), whether the box faces the open internet (fail2ban, SSH hardening, UFW), and whether it is allowed to sleep (suspend, logind). Asked in pre-flight rather than at each point of use. The steps that care run from swap through to the firewall, and being asked "is this a VPS?" for the fourth time halfway down a provisioning run is how people start answering without reading. The default offered is guessed from whether this machine's own address is in RFC1918 space, which beats asking whether it is virtualised — a homelab is very often a VM on Proxmox and would be misread as rented — and is the same fact most of the branches turn on anyway. A graphical session means dev; so does macOS. It is only ever a suggestion the user confirms. MACHINE_ROLE in the environment answers it ahead of time for an unattended run, which is why it is declared with :- rather than a plain assignment. The first version wiped the caller's value before ask_machine_role ever saw it; caught by running with MACHINE_ROLE=vps and watching the menu appear anyway. Verified: guesses vps on this host (public IPv4, no DISPLAY, no display manager), env override takes, and a bad value fails with the three valid ones named. Nothing consumes the role yet — the steps get wired as each is worked through. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
34bb8fc22a |
put the superseded setup scripts in setup-old, and repair what the move broke
scripts/setup/ is now what the new installer is being built in — machine-setup/ for the box, officer-setup.sh for the platform on top — and everything being replaced moved to scripts/setup-old/. It still works and is still what to run. Three things the move broke, and what each needed: starship.toml is not an old-setup artifact. os-user-shell.ts reads it at RUNTIME to seed a member's ~/.config/starship.toml when their Linux account is provisioned, and line 125 reads it inside a try whose catch returns "could not read the shell templates" — so account provisioning would have failed outright, not degraded. Moved back to scripts/setup/, which is where it belongs anyway (one file, both audiences) and which leaves the code correct with no edit. package.json's `setup` script pointed at a path that no longer exists. It now points at officer-setup.sh, where the installer is going, rather than at setup-old/ which is temporary. officer-setup.sh was created empty. An empty script exits 0, so `bun setup` would have reported success while doing nothing — worse than the broken path it replaced. It now explains that it is not written yet and exits 1, naming the setup-old script to run meanwhile. Also brought .tmux.conf and ufw-docker-rules.conf in beside machine-setup.sh, which reads both from SCRIPT_DIR and had been silently skipping them since the script was vendored. ssh-keys.zip deliberately stays out: it is key material, and *.zip is ignored. Comments in os-user-claude.ts, app-store/preflight.ts and two docs still name the old scripts/setup/setup.sh path. Left alone on purpose — repointing them at setup-old/ only to repoint them again when officer-setup.sh lands is churn. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
44141faf0a |
split machine-setup into an entry point and a base library
Structure before the work rather than during it: scripts/machine-setup.sh becomes
scripts/setup/machine-setup/, with the script itself as the entry point and
lib/base.sh holding what every part of it needs.
machine-setup.sh pre-flight and the numbered sections, for now
lib/base.sh shared state, output, the step/resume machine, prompts,
and OS detection
The rule for lib/ is definitions only — nothing there installs, writes or
restarts anything, so sourcing it is safe from anywhere. That is why the ERR
trap stayed in the entry point: a trap is a side effect on whoever sources it.
Behaviour is unchanged. Verified by diffing the moved region against the previous
commit: identical set of functions, and the only differences are added comments,
section banners, fail() reformatted onto three lines, and one new line — a guard
against double-sourcing, which matters because steps will source this directly
once they move out, and a second pass would reset SUMMARY.
The sections are still one 1111-line block below pre-flight; they move into
steps/ as each is worked through. The script also still reads ssh-keys.zip,
.tmux.conf and ufw-docker-rules.conf from SCRIPT_DIR, which is now this
directory, so those three steps warn and skip until the files follow it here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
pastilhasandClaude Opus 5
|
2eedbcda54 |
bind nginx proxy manager to the tailscale address
It was the only service here publishing on 0.0.0.0, and a published docker port is not behind the firewall: docker writes its DNAT rules straight into the nat table, which ufw's INPUT chain never sees. `ufw default deny incoming` never covered 80/443/81 — ufw-docker-rules.conf on the host exists to patch exactly that, and patching a rule is weaker than never opening the socket. The address is read from `tailscale ip -4` at run time rather than passed in, because the host provisioning has already done `tailscale up` by the time this executes. It is validated against 100.64.0.0/10, the range tailscale and headscale both allocate from. SETUP_NPM_BIND overrides it. With neither, selecting NPM exits instead of falling back to 0.0.0.0 — a fallback would silently undo the point of the change. Two consequences worth knowing. tailscaled becomes a boot-order dependency, so the script warns when it is not enabled at boot; docker's restart policy covers the window but only if the tailnet comes up on its own. And HTTP-01 ACME challenges can no longer reach port 80, so any certificate NPM issues now needs DNS-01. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
4e404f17c8 |
split the optional host dependencies out of setup.sh
8 Rust, 9 PulseAudio, 10 cliamp, 13 yt-dlp and 17 the remote desktop move to scripts/setup/setup-sidecars.sh, which nothing invokes — running it is a deliberate act. They are what the optional, sidecar-backed features need on the host, not what the app needs to serve itself. 11 Neovim, 12 the shell extras and 14 the npm globals are gone entirely. The host provisioning already installs node, npm, pm2, Claude Code, Neovim and the shell, and two installers racing for the same binaries is worse than one. That makes node, npm, pm2 and the agent CLIs prerequisites of this script rather than products of it, so the verification block still checks claude and pm2 — section 19 warns and skips rather than failing when pm2 is absent, which would otherwise finish "successfully" with nothing listening. eza is the one casualty: the provisioning installs lazygit, starship, oh-my-zsh and nvim, but not that. Section numbers keep their gaps so the two files read against each other. One line survives from the removed section 14 — the ~/.local/bin PATH export, which section 19's `has pm2` and the agent's claude lookup both still depend on. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
f5f509a99d |
scripts/setup is the initial install, nothing else
Two of the eight did not belong. cleanup-desktop.sh is the teardown — the inverse of an install, not part of one. provision-user-dirs.ts runs per account at invite time, on a machine that is already set up. Both are back at the top level, with their `../` derivations and usage strings put back. What is left is what a fresh machine runs once: the two installers (setup.sh, setup_mac_light.sh), the two things setup.sh calls (setup-dockers.sh, setup-desktop.sh), and the two files they deploy — starship.toml, copied to ~/.config, and officer-set-display.sh, which setup-desktop.sh installs to ~/.local/bin as a login-time mode setter. The last one is not a setup script and does not read like one; it is here because it is install payload, same as the toml, and setup-desktop.sh loads it by `$(dirname $0)`. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
pastilhasandClaude Opus 5
|
9c353f5f0d |
move host setup into scripts/setup/
scripts/ was holding two unrelated kinds of thing: install-this-machine, and run-this-occasionally. The eight installers now live in scripts/setup/; what stays at the top level is the build steps (gen-index, prebuild, build/) and the two maintenance scripts (reindex-music, rebuild-soulseek-tree). The move is not just a rename. Three of these derive the repo root from their own location: setup.sh:51 PROJECT_DIR="$(dirname "$SCRIPT_DIR")" setup_mac_light.sh:51 same cleanup-desktop.sh:134 ENV_FILE="$(dirname "$0")/../.env" Left alone, all three would now resolve to scripts/ — and nothing downstream complains. PROJECT_DIR is where .env is written, where `bun install`, `gen:index` and `db:push` run, and what pm2 is pointed at, so a fresh install would have quietly provisioned scripts/ and reported success. cleanup-desktop.sh fails the other way: it would find no .env, print "No .env — skipping", and leave the real VNC_PASSWORD in the real file. All three are now `../..` with a comment saying why the level matters. provision-user-dirs.ts imports data-path.ts relatively; that one tsgo caught. Also disambiguated `setup.sh` where it had become two files. app-store/templates/<name>/setup.sh is a per-sidecar installer with its own contract, and preflight.ts + docs/sidecar-app-store.md discussed both in the same paragraph. The host one is now spelled with its full path at those sites. Verified: bash -n on all six shell scripts, tsgo clean, os-user tests pass, both derivations resolve to the repo root, starship.toml still resolves from os-user-shell.ts, and provision-user-dirs.ts runs under DRY_RUN. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |