A fifth section between Fonts and Spacing. The same four roles the families use,
so a template asks for a role and gets both — and a role used at two sizes on
purpose collapses to one, which was the trade taken over a separate list of text
roles.
The live preview builds the same stylesheet the site renders, because a size is
three values and an inline style cannot carry a media query.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every field in there writes one breakpoint, chosen by the tabs at the top of the
panel. Without the name the same six selects mean six different things depending
on something above them.
One span, not two: the trigger is justify-between and puts the chevron last.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The line under every nav row, the line under every font select, and the caption
under the preview. Each explained a control to somebody who has already found
it, and the caption was wrong as well — there is no Save to press.
The nav rows are one line now, so they centre.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
text-xs was the size of the labels under it, so the three headings read as one
more row of form furniture. Bigger and heavier — weight is the signal that
survives at this density without adding a second thing to look at.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A container query, not a screen one: this sits in a workspace panel whose width
is a divider somebody drags, so the window says nothing about the room. Below
240px the icons stand alone and the word is the tooltip.
Every editor section starts open. It opened on one, from ?tab=, which is what
tabs want — these are not tabs, and a collapsed column asks somebody to go
looking for the setting they came for. ?tab= is gone with it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Icons alone told three things apart by proportion at 12 pixels. Full width, one
of three filled, and the word from DEVICES.
The `size` prop is gone with the bar that needed the small one, and so is the
second copy inside Spacing — the panel header scopes the whole editor now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It sat across the top of the detail panel with Sync, Build and Publish — three
things that act on the site, beside one that decides how you are looking at it.
The toggle belongs with the settings it scopes: a spacing is chosen per width,
so the control saying which width is the first thing in that column.
Sync, Build and Publish are unmounted until they have a place of their own.
ViewModeProvider stays; it was never the bar's.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Save button is gone, and so is the SaveTarget context that announced it.
Every screen here is a preview of the thing being edited, so a change is already
visible before it is written — a button then asks somebody to confirm what they
can see.
useAutosave debounces a burst into one request. It takes the unsaved state as a
string rather than a flag, so a failed save is not retried on the next render,
and it flushes on unmount so a section change loses nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The frame took all the room the panel had, so a short page left a band of white
under the footer with the measure guides running down through it. An iframe has
no height: fit-content, so the page is measured inside it and the frame follows.
The wrapper, not the body — body is min-h-screen, so measuring it would ask the
frame how tall the frame is.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The admin declares its routes in the manifest, so /fofos-admin/layout/header and
/fofos-admin/pages/home are real URLs. One reader takes the two segments after
the mount; links carry no query string at all, so nothing leaks between
sections.
What stays in the query is how you are looking — device, tab, view — rather than
at what.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Space between became Vertical padding: space-y hangs its margin below the box,
and the box's bottom border is the separator, so the room never landed above a
rule. The canvas now rewrites both axes on a band.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Top Nav, Sections and Footer each get their own horizontal padding, plus the
one space that band owns: the room under the rule, the gap between bands, the
room above the footer.
The preview marker now names its band, so a change moves one band and not all
three.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The three columns became one select. Which breakpoint it writes comes from the device control above it,
so the value you see is the value for the view you are looking at.
Spacing's settings are per width, so the section has to say which width it is editing — and the answer
must be the one the preview is already showing, not a second selector able to disagree with it.
It reads `?device=` rather than the ViewMode context, and that is not a preference. The editor is a
SIBLING panel: an element built inside the detail panel resolves context where it is RENDERED, so a
toggle handed over would look up a tree with no provider in it and quietly show the default forever.
The URL is the shared state, which means there is nothing to share. Three components read one
parameter, so they cannot disagree, and the preview follows without being subscribed to anything — it
reads the same value. More editor sections can take the control by rendering it.
The bar's own toggle is now the same component. It had its own copy of the options and the handler,
which is exactly how two controls for one thing start to differ.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The heading only. What it does is unchanged for now — the word is widening ahead of the behaviour,
which is the right order: the section is about to hold more than one kind of space, and Padding names
only one of them.
Pressing Layout while a band was open gave `?section=layout&band=footer`, so the row for the whole
section led to one part of it. Pressing a section carried whatever the last one had left behind.
Every link built a copy of the current query string and deleted the parameters known to be scoped —
`media`, then `page`, and `band` would have been the third. That is a list of exceptions that has to
grow every time a section gains a parameter, and it fails silently when somebody forgets: the link
still works, it just goes somewhere more specific than it says.
Starting from an empty query string inverts the default. A parameter survives a navigation only if the
link says so, which is one decision at each link rather than a list of everything that must not leak.
So a section row is `?section=x`, and a sub-item is that plus its own `band` or `page`. Nothing else
rides along, including the device and the open tab — both are restored to their defaults by the panel
that owns them, which is where a default belongs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The two headings take the site's own spelling and the shorter word. "Typefaces" is the more precise
term and "Fonts" is the one everybody reaches for; a section heading is a signpost, not a definition.
The fonts go two by two. Four across existed to keep this section the same height as Colours, because
as tabs they shared one grid cell and a taller panel moved everything below it. Stacked sections do not
have that constraint — each is as tall as it is and nothing above it moves — so the reason expired with
the tabs.
What four across cost was the labels: in a panel this narrow every select truncated to "Martia…", so
the row said four times that a font had been chosen and never which one. Two columns give each the room
to be read, which is the only thing the control is for.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three tabs became three collapsible sections in a column, because there are going to be more than
three. A tab strip works while the names fit on one line and degrades the moment they do not — it wraps,
or it scrolls, and either way the set stops being visible at a glance.
`type="multiple"`, so more than one can be open. Tabs enforced exactly one, which is right when the
panels are alternatives and wrong when they are parts of the same thing: the colours and the padding of
a layout are read together as often as separately.
The grid overlay went with them. Every panel shared one cell so the block stayed as tall as the tallest
and did not jump when the tab changed — a real problem that stacked sections do not have, because a
section that is closed occupies nothing and one that is open is as tall as it is.
`?tab=` still seeds which section starts open, so an old link keeps working and lands on the thing it
named.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It sat just inside the left guide, which is on top of the page — over the logo, on this site — and it
is not part of the page. The margin is the one strip on screen belonging to the editor rather than to
the site, so the number describing the measure lives there.
Right rather than left: the eye reads the guide and then the width, so the label is the answer to the
line beside it, and the right margin is the one a wide frame has room in.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two things, both asked for after looking at it.
The tint came out. Shading the margins was meant to say "the page does not use this", and against a
white page it read as a blue background — a colour the site does not have, on the screen that exists to
show the site's colours. The two hairlines say the same thing without claiming anything.
And Desktop is fluid. `width: null` means the frame takes whatever the panel gives it, which is the
honest answer for a device that has no width: a desktop is whatever window somebody opened. 1440 was a
guess that then had to be centred and scrolled inside the panel — a page rendered at one width and
looked at inside another, with dark room either side of it.
Tablet and mobile stay pinned, because 834 and 390 are claims about real devices and pinning them is
the only way the preview can answer "what does this look like on a phone".
Fluid, the frame IS a desktop window: the site's media queries answer the panel's real width, and the
measure guides mark where the content stops in the pixels you are actually looking at.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two hairlines said where the measure ends and left the reader to notice that everything outside them
was empty. The margins are tinted now, faintly, so the unused width reads as what it is — room the page
does not occupy, which is the question somebody widening a gutter or judging a desktop layout is
actually asking.
Faint on purpose: it is absence, and anything stronger competes with the content for the eye. Nothing
is drawn at all when the frame is no wider than the measure, which is the existing early return.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`1 | [1 | 1]`, and the brackets are a real container this time.
Nesting them as a GROUP was the first attempt and looked identical — a horizontal group inside a
horizontal group renders three columns, because that is what it is. All it bought was which divider
moved what, which is invisible until you drag one.
So the pair is a panel whose component hosts its own WorkspaceView, the way DashboardPreview does. It
has its own chrome, its own divider and its own persisted sizes, and the root layout has two children
rather than three: the shape on screen is now the shape in the file.
`useAuthoredLayout` rather than `useDashboardState`, and its own key beside the root's. The structure is
the author's and comes from source every render; only sizes are the user's. Sharing one key would have
the inner and outer trees persisting over each other's sizes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`1 | 1 | 1` became `1 | [1 | 1]`, and the nesting is the whole difference.
Three siblings means every divider sits between two of them: widening the editor took from the preview,
and dragging the nav re-proportioned all three. Three panels that could only be sized against each
other.
Nested, the outer divider moves the nav against THE WORK and the inner one splits the work between
looking and changing. Those are the two questions somebody actually has — "give me more room" and "I
need more of the controls right now" — and each is one drag that leaves the other answer alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Colours, Typefaces and Padding sat below the preview and took their height from it — the same trade the
page builder's editors made, and undone for the same reason: this screen exists to be looked at, and
the controls were eating the thing being judged.
Announced through the same slot, so the panel still holds nothing and still knows nothing about what a
layout is.
One thing that does not survive the move: a JSX comment cannot be an argument. The block carried its
own `{/* … */}` above the tabs and it had to become an ordinary comment on the effect, which is where
the reasoning belongs anyway now that the element is announced rather than rendered in place.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The spacing and free-text editors rendered below the preview, so they took their height from the thing
being edited: choosing a spacing shrank the page you were choosing it for, and on a laptop two
dropdowns cost a third of the frame.
They are a third panel now, to the right of the preview. The workspace already knows how to size and
move panels; a drawer was a second, worse layout system living inside one of them.
The panel holds nothing. Whichever panel owns a selection BUILDS the editor and announces it through a
`useGlobal` slot — the two are siblings and neither may own the other, and a provider around both would
mean something above them knowing they exist.
The slot carries the ELEMENT, not a description of one. A descriptor plus a switch would move every
editor's loading, saving and cancelling into a panel that would have to learn what a section is — a
second place that understands the page builder, kept in step by hand. SaveTarget makes the same trade
for the same reason.
The hazard is real and worth naming: an element captures the props it was built with, so the announcing
effect must depend on everything the editor DISPLAYS. The save handlers sit in refs so they cannot drag
that list wider — depending on them would re-announce on every keystroke, and omitting them without
refs would announce a stale one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`element.style.margin = '2.5rem 0'` on every section — 40 pixels above and below every band that the
real page does not have. It was there to make room for the band's label, which sat above it.
So the preview overstated the spacing of every page in the site, on the screen whose entire purpose is
to show what a page looks like. It was reported as "there is a lot more space between the logo and the
text in the admin", and that is exactly what it was. I had looked at the component tools, found them
absolutely positioned, and said nothing the editor draws takes layout space. The section margin was two
lines above the thing I read.
The label moved inside the band it names. It is hover-only, so overlaying the first line for as long as
the pointer is there costs nothing — and lying about the layout costs the preview its whole point.
What remains is absolutely positioned or an outline, neither of which takes space. The add-section
zone keeps its margin: it is the editor's own element at the end of the page, spacing only itself.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The bar offered Edit and View, and View existed to see the page without the builder's outlines and
handles on top of it. It was the DEFAULT, which put a click in front of every arrival at the one panel
whose job is editing — and it put a branch in every painter that did nothing but wait for that click.
So the mode is gone rather than defaulted the other way: no toggle, no `?mode=`, no guard. The clean
page is still one click away and always was — it is the site, on its own URL. What the admin owes is
the editing surface, always.
The left group in the bar stays, empty. The middle one is centred against the BAR rather than against
its neighbours, so removing the left group would let Desktop/Tablet/Mobile drift as the right group
changes width.
The preview's caption stays too. It reads as a duplicate of the device buttons and is not: they say the
width, and it says which SERVER — development, not production — which nothing else on the screen does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Top Menu, Content, Footer — the layout IS a page, and those are the only three things on it. They were
reachable by scrolling and by knowing which tab held what; as rows they take the shape the nav already
teaches with the pages under Pages, and the open one is `band` in the query string.
Fixed rather than fetched, unlike pages. A band cannot be added or removed from the admin — only the
code that draws it can — so reading them from the database would be a query that can only ever return
the same three rows in the same order.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two rows, one of them marked `soon`, for a distinction that was never the editor's to make. The path
names a real file and what that file IS is a fact about it — the site reads it off the extension the
way a gallery item always has. So the picker asks for a file and stops asking what kind.
`video` is gone from what an editor can create and still legal in the database. Every row was migrated;
one written by something older should still be editable rather than open nothing, which is why the
edit path answers to both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Measured from the RUN, not from the press. `startedAt` is stamped by the server when the pass begins,
so the number is right for somebody who opened the modal halfway through, reloaded the page, or was
not the one who started it — the watcher starts runs too. A timer anchored to the click would read
zero in all three cases and be wrong by however long the run had already been going.
It freezes at `finishedAt` rather than counting up beside a finished run, because the total is the
useful number: it is what tells you the next full sync will also take forty minutes.
`tabular-nums`, so a digit changing every second does not shift the words beside it.
Clock skew is the one thing that can make this wrong, by exactly its error — both times are absolute,
so a timezone cannot. The alternative, anchoring locally the first time a run is seen, is exact for
whoever pressed the button and silently zero for everyone else.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The counters said how MUCH and never which file, so a run that was working normally and one that had
wedged produced the same screen: `done` stops moving either way. A photograph is around thirty encodes
and a video is three plus a poster ladder, and none of that was visible from outside.
So the run keeps a transcript and the button opens it.
Every rung reports itself by CONSTRUCTION. Ten `variants.push` call sites became one `add`, which is
the point — a rung added later is described without anybody remembering to describe it. The slow
stages that produce nothing until they finish say so BEFORE they start instead: the HEIC decode, each
video rung, the poster frame. Those are the pauses that read as a hang.
`?since=<n>` is what keeps it cheap. The transcript is thousands of lines and polls once a second, so
sending all of it every tick would be the same megabyte over and over; the client keeps what it has
and asks for the rest. No `since` means everything, which is what a modal opened mid-run wants.
The transcript lives in the shared slot, not the modal, so closing it does not throw away the run —
somebody who looks, closes, and looks again is watching one run rather than two. `startedAt` is what
identifies a run, because `n` restarts at 1 and appending across a boundary would interleave two.
Polling, not a socket. Each line transfers once and the events are seconds apart, so a second
transport to open, authenticate and reconnect would buy nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It sat under the two folders it acts on, which was right while it was a detail of setting fofos up. It
is not one: a stale `derived/` is why a picture is missing from a page somebody is looking at, and the
fix was three sections away in a card about where the site lives. Beside Build and Publish it reads as
what it is — the third thing you do to a site, and the one that has to happen first.
The card keeps what needs room: the progress bar, the failures, the run history.
Shared through `useGlobal`, keyed `['fofos-admin','media-sync']` — a slot in the app-wide query cache,
so no provider has to wrap the bar and the panel together and a third reader is one line. Not a
context: this codebase has one for Save because a SECTION owns that state and announces it upward.
Nobody owns this one; it is a fact about a folder, which is what a keyed slot is for.
`useGlobal` shares the value and not the work, so the fetching is a separate hook with exactly one
caller — the button. The bar is mounted whenever the plugin is open and the Administration card is
mounted only sometimes, so the thing that is always there is the thing that asks. Two callers would
poll the same endpoint twice a second.
Gated on `rootSet`, not `ready`: sync reads a folder on this machine and never speaks to fofos.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both hold nothing, so adding one opens no editor: a dialog with no field on it is a step that exists
only to be got past. The picker itself answers the opposite way for the kinds that DO have a choice
to make, which is the distinction worth keeping.
The canvas draws no Edit button for them either — an Edit that opens nothing is worse than no Edit.
It asks the panel rather than holding a list of kinds, because which kinds are editable is the same
knowledge that decides which editor opens, and that already lives there. Absent means editable, so a
caller that has never thought about it gets what it had.
The Spacing dialog's label became a map. It was two kinds and readable as a ternary, then three and
not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A built page is full-bleed now, so each band can draw a separator the width of the window, and each
holds its own content to the measure. `[data-content-column]` is therefore no longer one element
wrapping every section — it is one per section, and appending the drop zone to the first match put
"add a section" inside section one.
So it goes in `main`, with its width taken from a column rather than from a constant: the measure is
Tailwind's `max-w-7xl` and this file has no business knowing that. No sections, no column to ask, and
full width is right anyway — there is nothing to line up with.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The picker listed it as `soon` beside Image. It is not soon any more — the set, its ordering and the
carousel that draws it were already built on the site, so the block is a reference to one and the
admin's whole job is choosing which.
`GalleryPicker` chooses a SET and nothing else. Editing what is IN the set stays under Galleries: a
block that could also rearrange its own pictures would be a second place to do one job, and the two
would disagree. No thumbnails — every stored path names an original a browser cannot display, and the
plugin has no way to address a rendition, so the name and the count identify it instead.
Saved on choose, like a video and for the same reason: picking one thing is one act with one outcome,
so there is nothing to draft and nothing to cancel out of.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A Spacing handle on the section bar and in the component tools, opening an editor below the preview —
the same place the text editor goes, and for the same reason: a dialog covers the thing being spaced.
The device toggle picks the breakpoint. Two axes across three widths is six controls, five of them for a
width you are not looking at; this way you switch to Mobile, see the phone, and change the padding you
can watch changing. The site's GUTTER is the exception and shows all three at once, because it is one
axis and one value and it is a progression judged as a whole.
Inherit and 0 stay separate options, and the select names the value it is inheriting rather than leaving
it to be worked out.
Written IMMEDIATELY rather than drafted. A step is one choice from a short list and the effect is on
screen before the menu closes; a Save for it would be a second thing to remember on a panel whose other
verbs already act.
Spacing sits before Delete in the section bar, ordered by how often each is wanted rather than how they
read — the destructive one furthest from where the hand arrives.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Editing one paragraph silently un-aligned the others. A right-aligned line lost its alignment because
somebody justified something else — which reads as the alignment buttons applying to the whole document
rather than the selection, and is not that at all.
THE ROUND TRIP WAS LOSSY IN ONE DIRECTION. The editor emits `style="text-align: right"`; the site's
sanitiser refuses style attributes — one is a way to position something over the rest of the page — and
converts alignment to `class="rt-right"`. That half always worked.
Coming back out, tiptap parses styles and knows nothing about those classes. So a document loaded from
the database arrived with every alignment already gone, and the next save wrote the loss back. Whatever
you set in the current session survived; everything set before it did not.
Converting classes to styles as the editor is seeded makes the two ends symmetric, and the conversion is
the sanitiser's own table read backwards. The comparison in the re-seed effect had to move into the
editor's dialect too, or every load looks like a change: the stored html and getHTML() never match.
`rt-font-*` is not converted, and that is a known gap rather than an oversight — this editor has no font
control, so a stored font class has nothing to become and would be dropped either way. It wants a font
button before it wants a parser.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A modal covered the thing being edited, which for a page builder is the whole subject: you are choosing
how words sit in a column, and a dialog in front of the column answers a different question. It sits
under the preview now, the way the Layout section's controls already do.
AND THE TEXT LANDS IN THE PAGE AS IT IS TYPED. The panel writes each change straight into the
component's node in the frame, so the loop stops being "type, save, look" and becomes looking. That is
the same door everything else here goes through — the frame is same origin — and it is what the modal
made impossible rather than merely awkward.
The node's children are replaced and the injected tools put back. Those live inside the component and
belong to the admin, so an innerHTML that forgot them would take the Edit button away mid-edit.
Not sanitised while typing. The server cleans on write, so what is on screen can be marginally more
permissive than what is stored — and the difference shows the moment it is saved, which is the right
place to find out.
Cancel reloads the frame rather than restoring the markup by hand. The node has been written into on
every keystroke, and putting it back correctly means remembering what was there before the first one; a
reload is the same answer with nothing to get wrong.
The editor is capped and scrolls, so a long piece does not push the page off the top of the panel.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The picker offers it now, and choosing it opens the media picker rather than a dialog. A video is a
PATH, saved as soon as it is chosen: free text needs a draft because writing is something people do
halfway, and picking a file is one act with one outcome.
Edit means whatever editing that KIND means. The canvas draws one button; which door it opens is decided
in the panel, where the kinds are known — so Edit on a video reopens the picker and Edit on text opens
the editor.
Image and Gallery stay named and disabled. Both are things the site already has.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
All of them: the outline, the name, the shape, Delete, the column outlines and the button that adds to
them. A page with four bands was four labelled boxes at rest, and the page underneath was the one thing
you could not see — which is what an editor is for.
A COMPONENT keeps its own hover rather than inheriting the section's. A band with three paragraphs would
otherwise show three sets of Edit and Delete at once, and none of them would say which one it belonged
to.
Opacity, not display, so nothing moves when it appears. The controls hold their space whether visible or
not, and the page does not reflow under the cursor — which in an editor is worse than the noise it would
be fixing.
The outlines moved from inline styles into the stylesheet, because that is the only place `:hover` can
reach them. The section's MARGIN stays inline: it is layout and has to hold whether or not anything is
hovered.
`:focus-within` on both, so a keyboard reaches everything a cursor does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`rt-justify` has been in the sanitiser's allowlist all along, and styles.css gives it `text-align:
justify` with `hyphens: auto` — hyphenation being what stops justified text opening rivers of white
space between words. Only the toolbar was missing it.
The four are now a list beside the toolbar rather than a ternary chain, and the comment says what it has
to match: ALIGN_CLASSES in the site's rich-text.ts. A fifth offered here would be stripped on save,
silently, leaving somebody pressing a button that appears to do nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Edit and Delete sat permanently at the top-right of whatever they belonged to, on top of the text — and
on a paragraph that fills its column there is nowhere for them to go that is not on top of something.
So they are hidden until the component is hovered, which is when they are wanted and the only time they
are. The outline goes the same way: an editor should show the PAGE, with the handles arriving under the
cursor. One that outlines everything permanently is showing you the editor.
The tools also moved out of the component's corner into the gap above it, so even while visible they are
beside the content rather than over its first line.
The section's Delete gets the same treatment; its NAME stays, because that is what tells you which band
you are looking at, and it already sits above the section rather than on it. A destructive verb does not
need to be on screen at all times.
Done with one injected stylesheet rather than listeners on every node — `:hover` is the one thing inline
styles cannot express, and it is the only reason this file now has a <style> in it. `:focus-within` and
`:focus` keep both reachable by keyboard.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It opened the text editor straight away, and I had argued for that: Free Text is the only kind that
works, so a picker offering it is a click asking to be got past.
That was wrong in the way a shortcut usually is. It optimised the state of the app today and hid its
shape — somebody adding a component could not see what a component IS, or that there will be others,
and the day the second kind lands the interaction changes underneath them.
It is also the pattern this admin already uses. The nav lists unbuilt sections as `soon` rather than
hiding them, because a list of only what is finished gives no sense of what the thing is for. The same
argument applied here and I had not noticed.
Image, Video and Gallery are named and disabled. Those three are things the site already HAS — media,
video and galleries all exist as concepts here — which is the difference between saying what is coming
and inventing a roadmap.
The list lives in the plugin rather than the API. The API decides what may be STORED; this decides what
may be OFFERED, and it has to be here because every kind needs a label, an icon and an editor that only
exists in this plugin. A kind the server would accept and this has never heard of is not creatable
anyway.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
CHANGES APPEAR IMMEDIATELY. Colours and typefaces go into the frame as CSS custom properties because
that is what the page reads them as. A gutter cannot: only a class can carry a breakpoint, and there is
no variable to set instead. So the classes are swapped on the three elements marked `data-gutter`.
That works for one reason worth stating — the classes are in the SITE's stylesheet, which the frame
already has, and the site safelists every step. A class invented in the admin would silently do
nothing, which is the failure this whole arrangement keeps circling.
Only gutter classes are touched. Those three elements carry the gutter and nothing that looks like it —
a section's own padding lands on the <section> and the band padding on <header> — so stripping `px-N`
from them is safe where doing it to an arbitrary element would not be.
Driven by the dependency list rather than a second code path: `gutter` is a dependency of onDocument, so
changing it hands SitePreview a new function, whose effect runs the previous application's cleanup —
putting the original classes back — and then applies the new ones.
THE TAB IS IN THE URL. `?tab=padding`, same rule as the mode and the device: it is addressable. "Look at
the typefaces" is a link somebody sends, and a reload that drops you back on Colours loses the place you
were working in. Absent means Colours.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
One control, three values, horizontal only — Mobile, Tablet, Desktop on one row, smallest first because
that is the direction they cascade.
Not tied to the device toggle, and the difference from the per-band control is the reason. That one has
two axes and three bands, where showing every width would be eighteen inputs, so it writes to whichever
width the preview is showing. Here there is one axis and one value, so all three fit — and seeing them
together is the point. A gutter is a progression, 4 then 8 then 12, judged as a whole; reading it off
three separate visits to the same control is how a site ends up tighter on a tablet than on a phone.
Inherit still says what it is inheriting, and Mobile still says "None", because there is nothing below
it to inherit from.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Not a per-band control. The header, the content column and the footer share one measure and should
share one number at its edges — three sections' worth of controls would be three ways to disagree about
the same decision.
PaddingTab is untouched and stays. It is the per-band control and it is right for the pages, where a
band genuinely does want its own spacing. This panel just is not where that decision belongs.
Same interaction as everything else here: the device toggle picks the breakpoint, Inherit and 0 are
separate options because they are separate instructions, and the select says which value it is
inheriting rather than leaving it to be worked out.
Saved with the colours and the typefaces, because it is a field of the same row — so the per-band write
path this panel had briefly is gone with it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Choose a band — Header, Page, Footer — and set its horizontal and vertical padding. Which WIDTH you are
setting is decided by the Desktop / Tablet / Mobile buttons already in the bar:
Mobile 390 base every width
Tablet 834 md 768 and up
Desktop 1440 lg 1024 and up
That mapping is Tailwind's own and it lines up with the three preview widths exactly. Editing all three
at once would be six controls per section, five of them for a width you are not looking at; this way
you switch to Mobile, see the phone, and change the padding you can see changing.
INHERIT AND ZERO ARE DIFFERENT OPTIONS, because they are different instructions. Unset takes the
smaller breakpoint's value — which is what makes "one padding everywhere" a single choice rather than
three — and zero means no padding HERE even though the smaller width has some. The select says which
value is being inherited rather than leaving it to be worked out, and at the smallest width it says
"None", since there is nothing below to inherit from.
An emptied breakpoint is REMOVED rather than stored as `{}`, so "inherit everything" stays an absence
instead of becoming a thing that has to be told apart from one later.
One Save for both endpoints. The alternative was a second Save for spacing, which means somebody
changing a colour and a padding presses two buttons and is told about unsaved work by one of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Making Typefaces one row equalised the two tabs by luck, not by construction — the labels and the hints
under the selects still differed, and any tab that grows a row would put the jump straight back.
So every panel now sits in the SAME grid cell. The block is as tall as the tallest of them and stops
moving entirely, and it stays right when a tab is added or one of them grows.
Measuring instead would have meant a ResizeObserver, a re-measure after every edit, and a wrong answer
for one frame after each. `col-start-1 row-start-1` gets the same number out of the layout engine for
nothing.
`invisible`, not `hidden`. An invisible element still takes its space, which IS the mechanism — and it
is out of the tab order, so the controls behind the front panel cannot be reached by keyboard. The Tabs
root is controlled now, because visibility is decided here rather than by Radix unmounting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
pastilhasandClaude Opus 5